search for: clamd

...nce my power problems that resulted in a re-install I have a problem which I've failed to locate up to now. The logs show daily.cld updated (version: 8950, sigs: 72593, f-level: 38, builder: ccordes) Database updated (510565 signatures) from db.gb.clamav.net (IP: 163.1.3.8) WARNING: Clamd was NOT notified: Can't connect to clamd through /tmp/clamd.socket I've been through the config files, but obviously there is something in the setup that I've failed to do. Scans are running every night, but service clamd status clamd: unrecognized service It has to be something...

I have just run a 'yum update' on a Centos 7.2 server which updated several hundred RPMs. The update worked fine with no errors or warnings I then rebooted the server and now my EXIM is rejecting emails because the clamd service isn't running. So I tried: [root at ollie2 ~]# systemctl restart clamd.exim Failed to restart clamd.exim.service: Unit clamd.exim.service failed to load: No such file or directory. [root at ollie2 ~]# systemctl list-unit-files --type=service|grep -i exim exim.service...

I think something along these lines appeared before but I was unable to find them. I'm on a 7.6 system, been running clamav and amavisd-new since 6 days with little problem. On a recent reboot, clamd at amavisd does not start up and fails manual start. The problem seems to be the missing socket that connects the pair, "/var/run/clamd.amavisd/clamd.socket". I believe this should be created by systemd files but I see no indication of them on my system. Anyone know which files might b...

I'm trying to get amavis to play using clamd and tried to follow this: # ### http://www.clamav.net/ ['ClamAV-clamd', \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"], qr/\bOK$/, qr/\bFOUND$/, qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ], # # NOTE: run clamd under the same user as amavisd, or ru...

Everyone, I am putting together a new CentOS 7 mail server for our organization and am having some difficulty getting clamav to work with the clamav- milter for sendmail. I have set /etc/clamd.d/scan.conf to use clamscan as the user as well as root as the user and the status command of systemctl results in the same error messages : ? clamd at scan.service - Generic clamav scanner daemon ???Loaded: loaded (/usr/lib/systemd/system/clamd at scan.service; enabled; vendor preset: disabled)...

On 11/11/16 13:36, Gordon Messmer wrote: > On 11/09/2016 02:07 AM, Rob Kampen wrote: >> so I have /etc/tmpfiles.d/clamd.amavisd.conf with content >> d /var/run/clamd.amavisd 0755 amavis amavis - >> >> the process owner name and group name are amavis >> this is not quite what you specified - which should it be? > > If "User" is set to amavis in the clamd configuration, that loo...

...wrote: > On 11/08/2016 03:24 AM, Rob Kampen wrote: >> If there is anyone that has this combo of services working under >> CentOS7 and can shed any insight on why I cannot get this service to >> actually run, it would be very much appreciated. > > > When setting up a clamd service, you should need to enable the > service, create the configuration file, and typically set up > /etc/tmpfiles.d/clamd-<service>.conf. That file should have one line: > > d /run/clamd.<service> 0700 daemon daemon - > > ...or whatever user you use for clamd....

...conf (code=exited, status=0/SUCCESS) Main PID: 27427 (/usr/sbin/amavi) CGroup: /system.slice/amavisd.service ??27427 /usr/sbin/amavisd (master) ??27479 /usr/sbin/amavisd (ch1-avail) ??27480 /usr/sbin/amavisd (ch1-avail) but for the life of me, I cannot get clamd at amavisd to stay up. It always comes up and then dies after about 1 second : systemctl status clamd at amavisd.service ? clamd at amavisd.service - clamd scanner (amavisd) daemon Loaded: loaded (/usr/lib/systemd/system/clamd at .service; enabled; vendor preset: disabled) Active: inacti...

Has anyone actually got CLAMD and EXIM working? I've just had a go on a new VPS server without success. The only thing that happened was that my server slowed because clamd was hogging CPU. I have done a lot of googling and all I found was a couple of howto's that said the same thing, and my questions from 2015 which...

...tos 6.8 box fully patched using stable repos. ____ISSUE_____ Logwatch is reporting this error, which I'm going to assume has been occurring for a few years but doesn't affect sending/receiving emails, so I haven't chased it down, now I'm looking to fix that. 1 (06498-19) ClamAV-clamd: All attempts (1) failed connecting to /var/spool/amavisd/clamd.sock, retrying (1) Since this is reported by "ClamAV-clamd", I am assuming this is coming from amavisd.conf. My logic on this is that a grep search for that particular string only shows up in the /etc/amavisd.conf file, whe...

Le vendredi 30 ao?t 2019 ? 13:57 -0400, Jon LaBadie a ?crit : > I think something along these lines appeared before > but I was unable to find them. > > I'm on a 7.6 system, been running clamav and amavisd-new > since 6 days with little problem. On a recent reboot, > clamd at amavisd does not start up and fails manual start. > > The problem seems to be the missing socket that connects > the pair, "/var/run/clamd.amavisd/clamd.socket". > > I believe this should be created by systemd files but I > see no indication of them on my system. &g...

Helo, update is in EPEL repository. on startup, clamd does not further create clamd.sock and clamd.pid clamd service stops without any message - even in debug mode. It's a nightmare. Helmut -- Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565 Stuttgart Gesch?ftsf?hrung Dr.-Ing. Roswitha Hahn-Drodofsky HRB 210...

I had clamav-milter working as well as clamd, then for some reason clamd stopped and would not create the socket. After much hair pulling, I finally tracked the problem(s) down to /etc/clamd.conf. After commenting all the stuff out that was providing errors, it is now working again. I had somehow mixed versions from sourceforge and ce...

Hi list, I have a small server with a Postfix, amavisd and ClamAV installed and works fine. I install a squid proxy with squidclamav. Clamav works with /etc/clamd.d/amavisd.conf, but squidclamav cannot connect through the Unix socket in /var/spool/amavisd/clamd.sock. How can I configure clamav to create another Socket in /var/spool/squid/clamd.sock for example ? The service is clamd.amavisd, how can I change it to a more standard clamd deamon. Thanks a...

Everyone, I am putting together a new CentOS 7 mail server for our organization and am having some difficulty getting clamav to work with the clamav- milter for sendmail. I have set /etc/clamd.d/scan.conf to use clamscan as the user as well as root as the user and the status command of systemctl results in the same error messages : ? clamd at scan.service - Generic clamav scanner daemon ???Loaded: loaded (/usr/lib/systemd/system/clamd at scan.service; enabled; vendor preset: disabled)...

...e return. I JUST launched my new mail server after a few miscues. Actually the OS is Redsleeve6, which is the arm port of Centos 6, and perhaps some of my problems may come down to porting problems. But first, it may be that despite my testing, I missed something in the configurations. First clamd problems: Nov 19 08:09:54 z9m9z clamd[857]: lstat() failed on: /var/spool/amavisd/tmp/amavis-20141119T075446-18598/parts Nov 19 08:10:15 z9m9z clamd[857]: lstat() failed on: /var/spool/amavisd/tmp/amavis-20141119T075446-18599/parts Nov 19 08:11:13 z9m9z clamd[857]: lstat() failed on: /var/spool...

...main_cvd": path => "/var/lib/clamav/main.cvd", source => "puppet://$puppet_server/files/clamav/main.cvd", ensure => present, mode => 644, owner => vscan, group => vscan, before => SERVICE["clamd"], require => PACKAGE["clamav"] } file { "daily_cvd": path => "/var/lib/clamav/daily.cvd", source => "puppet://$puppet_server/files/clamav/daily.cvd", ensure => present, mode => 644,...

...0:56:51 rhel5 smbd_vscan-clamav[5238]: samba-vscan (vscan-clamav 0.3.6b) connected (Samba 3.0), (c) by Rainer Link, OpenAntiVirus.org Mar 11 10:56:51 rhel5 smbd_vscan-clamav[5238]: INFO: connect to service tmp by user mauramos Mar 11 10:57:10 rhel5 smbd_vscan-clamav[5238]: ERROR: can not connect to clamd (socket: '/home/clamav/clamd.sock')! Mar 11 10:57:10 rhel5 smbd_vscan-clamav[5238]: ERROR: can not communicate to daemon - access denied Mar 11 10:57:10 rhel5 smbd_vscan-clamav[5238]: ERROR: can not connect to clamd (socket: '/home/clamav/clamd.sock')! Mar 11 10:57:10 rhel5 smbd_vsc...

On my Centos6 mailserver (really Redsleeve6), I installed clamav and clamd (and lots more). I am working up to moving to Centos7 (really Centos7-arm), and no clamd. clamav is there. So is the clamd functions moved into clamav now or what do I do to get whatever clamd did for me? :) thanks

I get regularily such a mail <mail> Anacron job 'cron.daily' on .... /etc/cron.daily/logrotate: error: error running non-shared postrotate script for /var/log/clamd.clamsmtp/clamsmtpd.log of '/var/log/clamd.clamsmtp/clamsmtpd.log ' </mail> content of /etc/logrotate.d/clamsmtp /var/log/clamd.clamsmtp/clamsmtpd.log { monthly notifempty missingok postrotate pkill -SIGHUP -f clamd.clamsmtp >/dev/null 2>&1 ||...