search for: capabal

We have two Baytech RPC3 remote power switches(8 outlets each), they are great, you can telnet into them and reset ports as needed. I even setup one of them to be controlled by an AGI script on our Asterisk servers to cycle power over the phone. Saved countless hours of driving. APC makes them too although they are more expensive. MATT--- -----Original Message----- From: beonice

Hi there, we are using a couple of Diskless Linux Workstations in conjunction with PXE capabable Network cards to boot the system. This works fine using pxelinux. However, there are a few workstations left, which are not able to boot via PXE and thus this workstations need a Kernel on a floppy disk and an additional initrd image. The Problem with is, that both of them don't fit on a floppy

On Thu, Sep 3, 2015 at 7:25 AM, Hans de Goede <hdegoede at redhat.com> wrote: > On nv3x we will likely end up using the cpu to do color resolving for msaa > blits. Disable msaa on these cards so that we do not end up using the cpu. Actually the CPU fallback won't do scaled, so it's stuck with SIFM or assert(false). Which isn't great, but... it's what the HW does. I

Shorewall 4.4.19.4 is now available. Problems corrected in this update: 1) Previously, the compiler would allow a degenerate entry (only the BAND specified) in /etc/shorewall/tcpri. Such an entry now raises a compilation error. 2) Previously, it was possible to specify tcfilters and tcrules that classified traffic with the class-id of a non-leaf HFSC class. Such classes are

Please consider adding the following features to sshd: 1. AlwaysDenyLogin - a setting that will result in always denying login regardless of the credentials given by the client. 2. LoginDelayTime - to specify a delay in milliseconds before the server responds to a client's login attempt. These would help to employ brute force bots. Regards

Hi. I''ve installed our 1st Virtualized server using Xen. I''ve managed to create & populate a VM that''s going to be used as our office mail server. Everything seems to work ok -- I can send/receive email to/from the ''real world''. I''ve read a bunch at the Xen wiki about routing, and bridging, and security. Wow! Lots of stuff to digest

Following the most recent kernel updates I restarted our outgoing SMTP MTA which was recently reconfigured to DKIM sign messages using OpenDKIM. This morning I discovered that Postfix had stopped on that server. Whether it is related to the Postfix issue or not is yet to be determined but, in the process of getting things restarted I ran across this error with Open DKIM: # service opendkim

I have just noticed this message in my kernel logs, reporting the possibility of an error with my memory. This would go a long way towards explaining the problems i''ve been having. This particular error is occuring when i''m not running xen so is obviously not something brought on by xen itself. The strange thing is that the NMI error is always followed by the TLAN: eth0: Adaptor

https://bugs.freedesktop.org/show_bug.cgi?id=55227 Bug #: 55227 Summary: GeForce GTX 560 Ti fails to resume Classification: Unclassified Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component:

This week starts with the exciting news: We're getting close to Asterisk 1.0 again. After the failed attempt earlier this year, we've been able to remove a lot of the MAJOR/CRASH bugs from the bug tracker and Mark feel's it's time to target 1.0 again. At this point, the community needs to work as a community, spending extra time on finding bugs, solving issues, improving

This may not be the proper place to raise this question but I've had little luck elsewhere. After trying again, unsuccessfully this time, to install the proprietary NVIDIA driver, I've decided to focus my efforts on the open source Nouveau driver. I've seen video drivers blamed for varying degrees of "freeze on resume" but I'm not certain that's what I'm up

https://bugs.freedesktop.org/show_bug.cgi?id=98386 Bug ID: 98386 Summary: [NVE7] bus: MMIO write of FAULT at [ IBUS ], Pointer to {TDMS,flat panel) table invalid Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: minor Priority:

...rg, evb at yahoogroups.com Cc: chrisw at redhat.com Message-ID: <1282739262-14968-1-git-send-email-jens at linux.vnet.ibm.com> Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptoo...

...rg, evb at yahoogroups.com Cc: chrisw at redhat.com Message-ID: <1282739262-14968-1-git-send-email-jens at linux.vnet.ibm.com> Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptoo...

Hello. Minimal testcase for my problem: No X running, just a TTY. Use of the nouveau kernel module as of today (or any older) with an up to date vanilla kernel. Hardware: DELL Vostro 3500 with Geforce 310M. To suspend to ram I use this script, as suggested in Documentation/power/s2ram.txt: #!/bin/sh sync echo 1 > /sys/power/pm_trace echo mem > /sys/power/state When I try to suspend to

https://bugs.freedesktop.org/show_bug.cgi?id=83271 Priority: medium Bug ID: 83271 Assignee: nouveau at lists.freedesktop.org Summary: Windowed mode causes framebuffer not to refresh with PRIME on optimus/kepler discrete GPU QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified

Hi, I have an Optimus-enabled laptop with a GTX 1060m. I never got it to fully work with Nouveau even after Pascal support was added. I need to run the kernel with nouveau.runpm=0 to get it to work. Unfortunately without proper power mangement support, my laptop will run out of battery after about 1h30, so I'd love to get Optimus working. What I can see is that when the extra GPU is not in

Hm, well you can see the messages about failure to set plls, which is why you don't see anything. The only odd thing I see is that you're using vesa, which can definitely mess things up. Try not using that. Also try booting with nouveau.debug=debug drm.debug=0xe which might provide more relevant info. On Jun 12, 2015 8:34 AM, "Andre Campos Rodovalho" <andre.rodovalho at

Hi Everyone! I've been trying to get my Nvidia 9800m GT working with the latest nouveau drivers with no luck so far. First of all I'd like to mention that this is a weird card as it is an SLI in one piece of hardware (not 2 separated cards). It came with my Dell XPS M1730 laptop. I know SLI is not currently supported and _I don't want_ to use SLI, I just would like to use one of

My kernel crashed for some other reason, and now I can''t mount my btrfs filesystem. I don''t care about the data, it''s backed up. I''ll compile a 3.5 kernel, but is there any info you''d like off that filesystem to see why btrfs is crashing on mount? Marc [ 313.152857] device label btrfs_pool1 devid 1 transid 20769 /dev/mapper/disk1 [ 313.171318]