Nicolas Mercier
2017-Sep-11 14:54 UTC
[Nouveau] Nouveau: kernel hang on Optimus+Intel+NVidia GeForce 1060m
Hi,
I have an Optimus-enabled laptop with a GTX 1060m. I never got it to fully
work with Nouveau even after Pascal support was added. I need to run the
kernel with nouveau.runpm=0 to get it to work. Unfortunately without proper
power mangement support, my laptop will run out of battery after about
1h30, so I'd love to get Optimus working.
What I can see is that when the extra GPU is not in use, Nouveau will try
to shut it off. This seems to work, as the indicator of the laptop changes
to amber (discrete GPU in use) to blue (discrete GPU powered off), and the
kernel log (attached) reports that the GPU went off.
If I wake up the GPU (plugging in/out the external monitor, running a GL
command with DRI_PRIME=1, or even lspci) will make the computer
unresponsive and only a force shutdown will work, as no graphics command
seems to be able to execute anymore. Nouveau (likely, vga switcheroo) tries
to wake up the GPU but it seems to fail. The LED indicator does indicate
the GPU has power though.
Most of the time (but not often when I have an external monitor plugged
into the discrete card before I boot the computer) I get a timeout during
boot or during modprobe (see kernel log). Even with runpm=0, I can't seem
to be able to run GL commands on it:
yngwe at labarbara: % DRI_PRIME=1 glxinfo
name of display: :0.0
nvc0_screen_create:857 - Error allocating PGRAPH context for M2MF: -16
libGL error: failed to create dri screen
libGL error: failed to load driver: nouveau
display: :0 screen: 0
direct rendering: Yes
... follows up using the Intel card ...
the error I get in the kernel in that case:
[ 201.612583] nouveau 0000:01:00.0: gr: FECS falcon already acquired by gr!
[ 201.612586] nouveau 0000:01:00.0: gr: init failed, -16
It runs on Debian testing + the firmware from Ubuntu as Debian's firmware
does not have the nvidia blobs, kernel was either 4.12/4.13 release
candidates from Debian repositories or kernel 4.13.1 self compiled. I
always had exactly the same symptoms on all these kernels.
/nicolas
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/nouveau/attachments/20170911/1783ba5d/attachment-0001.html>
-------------- next part --------------
[ 0.000000] random: get_random_bytes called from start_kernel+0x2a/0x39f with
crng_init=0
[ 0.000000] Linux version 4.13.1+labarbara (root at labarbara) (gcc version
7.2.0 (Debian 7.2.0-3)) #1 SMP PREEMPT Mon Sep 11 16:19:31 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.1+labarbara
root=/dev/sda2 ro nouveau.runpm=-1 nouveau.modeset=1 acpi_osi=Linux
"acpi_osi=Windows 10" quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes,
using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000741cbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000741cc000-0x00000000741ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000741cd000-0x00000000741cdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000741ce000-0x0000000079dcefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079dcf000-0x000000007a888fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a889000-0x000000007a8cbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a8cc000-0x000000007ad03fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ad04000-0x000000007b38cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b38d000-0x000000007b3fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007b3fe000-0x000000007b3fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b3ff000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x7a896000 ACPI=0x7a896000 SMBIOS=0x7b300000
SMBIOS 3.0=0x7b2ff000 ESRT=0x78ca5bd8
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GP62MVR 7RF/MS-16JB, BIOS
E16JBIMS.310 07/31/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7b3ff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x0000000078ca5bd8 to
0x0000000078ca5c10.
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01fbb000, 0x01fbbfff] PGTABLE
[ 0.000000] BRK [0x01fbc000, 0x01fbcfff] PGTABLE
[ 0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE
[ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE
[ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
[ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007A896000 000024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 0x000000007A8960B8 0000EC (v01 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007A8BDD38 000114 (v06 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007A896230 027B07 (v02 MSI_NB MEGABOOK
01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000007ACEBC40 000040
[ 0.000000] ACPI: APIC 0x000000007A8BDE50 0000BC (v03 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007A8BDF10 000044 (v01 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000007A8BDF58 0000C1 (v01 MSI_NB MEGABOOK
01072009 AMI. 00010013)
[ 0.000000] ACPI: MCFG 0x000000007A8BE020 00003C (v01 MSI_NB MEGABOOK
01072009 MSFT 00000097)
[ 0.000000] ACPI: FIDT 0x000000007A8BE060 00009C (v01 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x000000007A8BE100 000055 (v03 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x000000007A8BE158 000176 (v01 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A8BE2D0 003154 (v02 SaSsdt SaSsdt
00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A8C1428 00287B (v02 PegSsd PegSsdt
00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000007A8C3CA8 000038 (v01 INTEL KBL
00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A8C3CE0 000E3B (v02 INTEL Ther_Rvp
00001000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000007A8C4B20 000042 (v01 INTEL EDK2
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000007A8C4B68 000EDE (v02 CpuRef CpuSsdt
00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000007A8C5A48 000094 (v01 INTEL KBL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000007A8C5AE0 000028 (v01 INTEL KBL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A8C5B08 00029F (v02 INTEL sensrhub
00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A8C5DA8 003002 (v02 INTEL PtidDevc
00001000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000007A8C8DB0 000034 (v01 INTEL
00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007A8C8DE8 000054 (v00 INTEL
00000002 MSFT 0000005F)
[ 0.000000] ACPI: BGRT 0x000000007A8C8E40 000038 (v01 MSI_NB MEGABOOK
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A8C8E78 0000AE (v02 SgRef SgPeg
00001000 INTL 20160422)
[ 0.000000] ACPI: TPM2 0x000000007A8C8F28 000034 (v03 Tpm2Tabl
00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x000000007A8C8F60 001EA5 (v01 OptRef OptTabl
00001000 INTL 20160422)
[ 0.000000] ACPI: ASF! 0x000000007A8CAE08 0000A0 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27effa000-0x27effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000741cbfff]
[ 0.000000] node 0: [mem 0x00000000741ce000-0x0000000079dcefff]
[ 0.000000] node 0: [mem 0x000000007b3fe000-0x000000007b3fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2067818
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7736 pages used for memmap
[ 0.000000] DMA32 zone: 495054 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at
0x000000007c000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] percpu: Embedded 37 pages/cpu @ffff88027ec00000 s112088 r8192
d31272 u262144
[ 0.000000] pcpu-alloc: s112088 r8192 d31272 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 2035483
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.1+labarbara
root=/dev/sda2 ro nouveau.runpm=-1 nouveau.modeset=1 acpi_osi=Linux
"acpi_osi=Windows 10" quiet
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 1048576 bytes
[ 0.000000] log_buf_len: 2097152 bytes
[ 0.000000] early log buf free: 1036996(98%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7989436K/8271272K available (4997K kernel code, 1108K
rwdata, 2144K rodata, 1244K init, 1392K bss, 281836K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 27196 entries in 107 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Detected 2800.000 MHz processor
[ 0.001000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5616.00 BogoMIPS (lpj=2808000)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20170531
[ 0.029651] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.030020] Security Framework initialized
[ 0.030021] Yama: becoming mindful.
[ 0.030025] AppArmor: AppArmor disabled by boot time parameter
[ 0.031384] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.031954] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031975] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.032020] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.032171] CPU: Physical Processor ID: 0
[ 0.032172] CPU: Processor Core ID: 0
[ 0.032175] ENERGY_PERF_BIAS: Set to 'normal', was
'performance'
[ 0.032176] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032180] mce: CPU supports 10 MCE banks
[ 0.032188] CPU0: Thermal monitoring enabled (TM1)
[ 0.032205] process: using mwait in idle threads
[ 0.032207] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032208] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032398] Freeing SMP alternatives memory: 16K
[ 0.035058] smpboot: Max logical packages: 2
[ 0.036281] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.040609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050638] TSC deadline timer enabled
[ 0.050643] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family:
0x6, model: 0x9e, stepping: 0x9)
[ 0.054017] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR,
full-width counters, Intel PMU driver.
[ 0.054059] ... version: 4
[ 0.054059] ... bit width: 48
[ 0.054060] ... generic registers: 4
[ 0.054060] ... value mask: 0000ffffffffffff
[ 0.054061] ... max period: 00007fffffffffff
[ 0.054061] ... fixed-purpose events: 3
[ 0.054062] ... event mask: 000000070000000f
[ 0.056007] Hierarchical SRCU implementation.
[ 0.060138] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.062005] smp: Bringing up secondary CPUs ...
[ 0.070039] x86: Booting SMP configuration:
[ 0.070039] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.538078] smp: Brought up 1 node, 8 CPUs
[ 0.538078] smpboot: Total of 8 processors activated (44975.56 BogoMIPS)
[ 0.539283] devtmpfs: initialized
[ 0.539283] PM: Registering ACPI NVS region [mem 0x741cc000-0x741ccfff] (4096
bytes)
[ 0.539283] PM: Registering ACPI NVS region [mem 0x7a8cc000-0x7ad03fff]
(4423680 bytes)
[ 0.539283] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.539283] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.539283] pinctrl core: initialized pinctrl subsystem
[ 0.539283] NET: Registered protocol family 16
[ 0.539399] cpuidle: using governor ladder
[ 0.539399] cpuidle: using governor menu
[ 0.539399] PCCT header not found.
[ 0.540038] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.540039] ACPI: bus type PCI registered
[ 0.540040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.540092] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.540094] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.540102] PCI: Using configuration type 1 for base access
[ 0.541004] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.541005] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.541032] ACPI: Added _OSI(Module Device)
[ 0.541032] ACPI: Added _OSI(Processor Device)
[ 0.541033] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.541034] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.541035] ACPI: Added _OSI(Linux)
[ 0.541036] ACPI: Added _OSI(Windows 10)
[ 0.541041] ACPI: EC: EC started
[ 0.541042] ACPI: EC: interrupt blocked
[ 0.543455] ACPI: \: Used as first EC
[ 0.543456] ACPI: \: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.543457] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.545213] ACPI: Executed 36 blocks of module-level executable AML code
[ 0.555870] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[ 0.559200] ACPI: Dynamic OEM Table Load:
[ 0.559205] ACPI: SSDT 0xFFFF880274EF8800 000663 (v02 PmRef Cpu0Ist
00003000 INTL 20160422)
[ 0.559339] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.559392] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.560412] ACPI: Dynamic OEM Table Load:
[ 0.560417] ACPI: SSDT 0xFFFF880274F00C00 0003FF (v02 PmRef Cpu0Cst
00003001 INTL 20160422)
[ 0.560534] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.560832] ACPI: Dynamic OEM Table Load:
[ 0.560837] ACPI: SSDT 0xFFFF880274EF9000 00065C (v02 PmRef ApIst
00003000 INTL 20160422)
[ 0.561122] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.561266] ACPI: Dynamic OEM Table Load:
[ 0.561270] ACPI: SSDT 0xFFFF880274EED400 00018A (v02 PmRef ApCst
00003000 INTL 20160422)
[ 0.561385] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.563465] ACPI: Interpreter enabled
[ 0.563494] ACPI: (supports S0 S3 S5)
[ 0.563495] ACPI: Using IOAPIC for interrupt routing
[ 0.563524] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.566144] ACPI: Power Resource [PG00] (on)
[ 0.567082] ACPI: Power Resource [PG01] (on)
[ 0.567387] ACPI: Power Resource [PG02] (on)
[ 0.569675] ACPI: Power Resource [WRST] (on)
[ 0.569953] ACPI: Power Resource [WRST] (on)
[ 0.570230] ACPI: Power Resource [WRST] (on)
[ 0.570509] ACPI: Power Resource [WRST] (on)
[ 0.570789] ACPI: Power Resource [WRST] (on)
[ 0.571072] ACPI: Power Resource [WRST] (on)
[ 0.571346] ACPI: Power Resource [WRST] (on)
[ 0.571619] ACPI: Power Resource [WRST] (on)
[ 0.571894] ACPI: Power Resource [WRST] (on)
[ 0.572172] ACPI: Power Resource [WRST] (on)
[ 0.572455] ACPI: Power Resource [WRST] (on)
[ 0.572732] ACPI: Power Resource [WRST] (on)
[ 0.573008] ACPI: Power Resource [WRST] (on)
[ 0.573284] ACPI: Power Resource [WRST] (on)
[ 0.573557] ACPI: Power Resource [WRST] (on)
[ 0.573832] ACPI: Power Resource [WRST] (on)
[ 0.574110] ACPI: Power Resource [WRST] (on)
[ 0.575153] ACPI: Power Resource [WRST] (on)
[ 0.575426] ACPI: Power Resource [WRST] (on)
[ 0.575701] ACPI: Power Resource [WRST] (on)
[ 0.586333] ACPI: Power Resource [FN00] (off)
[ 0.586408] ACPI: Power Resource [FN01] (off)
[ 0.586481] ACPI: Power Resource [FN02] (off)
[ 0.586553] ACPI: Power Resource [FN03] (off)
[ 0.586627] ACPI: Power Resource [FN04] (off)
[ 0.587632] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.587636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.587663] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.588155] PCI host bridge to bus 0000:00
[ 0.588157] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.588158] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.588159] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.588160] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff
window]
[ 0.588161] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff
window]
[ 0.588162] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff
window]
[ 0.588163] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff
window]
[ 0.588164] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff
window]
[ 0.588165] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff
window]
[ 0.588165] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff
window]
[ 0.588166] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff
window]
[ 0.588167] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff
window]
[ 0.588168] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff
window]
[ 0.588169] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff
window]
[ 0.588170] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff
window]
[ 0.588171] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff
window]
[ 0.588172] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff
window]
[ 0.588173] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff
window]
[ 0.588174] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff
window]
[ 0.588175] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.588181] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[ 0.588461] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.588496] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.588651] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[ 0.588659] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.588664] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit
pref]
[ 0.588668] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.588846] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.588865] pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
[ 0.588923] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.589096] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.589115] pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
[ 0.589272] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.589296] pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
[ 0.589362] pci 0000:00:16.0: PME# supported from D3hot
[ 0.589501] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.589516] pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
[ 0.589522] pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
[ 0.589528] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.589534] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.589541] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.589547] pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
[ 0.589582] pci 0000:00:17.0: PME# supported from D3hot
[ 0.589708] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.589764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.589908] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.589965] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.590104] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[ 0.590159] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.590312] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[ 0.590525] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.590537] pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
[ 0.590686] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[ 0.590710] pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
[ 0.590733] pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
[ 0.590776] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.590945] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.591002] pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
[ 0.591071] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.591287] pci 0000:01:00.0: [10de:1c20] type 00 class 0x030000
[ 0.591300] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.591306] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit
pref]
[ 0.591313] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit
pref]
[ 0.591318] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.591323] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.594010] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.594013] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.594014] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.594017] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 0.594095] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
[ 0.594141] pci 0000:02:00.0: reg 0x10: [mem 0xdf300000-0xdf301fff 64bit]
[ 0.594295] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.594433] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.594437] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.594503] pci 0000:03:00.0: [1969:e0b1] type 00 class 0x020000
[ 0.594533] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf23ffff 64bit]
[ 0.594543] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.594645] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.594739] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.594741] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.594743] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.594810] pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.594840] pci 0000:04:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
[ 0.594951] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.595054] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.595058] pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.597061] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597103] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.597145] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597185] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597225] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597265] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597305] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597345] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.597796] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.597825] ACPI: EC: EC stopped
[ 0.597826] ACPI: EC: EC started
[ 0.597826] ACPI: EC: interrupt blocked
[ 0.599497] ACPI: EC: interrupt unblocked
[ 0.599509] ACPI: EC: event unblocked
[ 0.599520] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.599521] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle
transactions and events
[ 0.599595] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.599596] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle
transactions and events
[ 0.599638] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.599638] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.599638] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[ 0.599638] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.599638] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.599638] vgaarb: loaded
[ 0.599638] SCSI subsystem initialized
[ 0.599638] libata version 3.00 loaded.
[ 0.599638] Registered efivars operations
[ 0.617487] PCI: Using ACPI for IRQ routing
[ 0.645190] PCI: pci_cache_line_size set to 64 bytes
[ 0.645244] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.645245] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.645245] e820: reserve RAM buffer [mem 0x741cc000-0x77ffffff]
[ 0.645246] e820: reserve RAM buffer [mem 0x79dcf000-0x7bffffff]
[ 0.645247] e820: reserve RAM buffer [mem 0x7b3ff000-0x7bffffff]
[ 0.645248] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.645403] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.645408] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.647014] clocksource: Switched to clocksource hpet
[ 0.655299] VFS: Disk quotas dquot_6.6.0
[ 0.655313] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.655370] pnp: PnP ACPI init
[ 0.655539] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.655541] system 00:00: [io 0xffff] has been reserved
[ 0.655542] system 00:00: [io 0xffff] has been reserved
[ 0.655543] system 00:00: [io 0xffff] has been reserved
[ 0.655544] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.655545] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.655548] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.655622] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.655623] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.655641] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.655670] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.655672] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.655700] pnp 00:04: Plug and Play ACPI device, IDs SYN1509 SYN1500 SYN0002
PNP0f13 SYN1507 (active)
[ 0.655719] pnp 00:05: Plug and Play ACPI device, IDs MSI0007 PNP0303
(active)
[ 0.656385] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.656386] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.656387] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.656388] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.656389] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.656390] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.656391] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.656393] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.656394] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.656395] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.656397] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.656430] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.656432] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.656433] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.656434] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.656435] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.656436] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.656437] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.656439] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.656676] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.656678] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.657589] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.657590] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.657591] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.657593] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.658289] pnp: PnP ACPI: found 10 devices
[ 0.666120] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.666141] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.666143] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.666146] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.666148] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 0.666152] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.666155] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.666159] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.666161] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.666164] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.666168] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.666171] pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.666177] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.666178] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.666179] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.666180] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.666181] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.666182] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.666183] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.666183] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.666184] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.666185] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.666186] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.666187] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.666188] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.666189] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.666190] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.666191] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.666192] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window]
[ 0.666193] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[ 0.666194] pci_bus 0000:00: resource 22 [mem 0xfc000000-0xfc00ffff window]
[ 0.666195] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.666196] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.666197] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit
pref]
[ 0.666198] pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf3fffff]
[ 0.666199] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.666200] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.666201] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.666324] NET: Registered protocol family 2
[ 0.666447] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.666543] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.666674] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.666700] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.666720] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.666762] NET: Registered protocol family 1
[ 0.666774] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.667169] PCI: CLS 64 bytes, default 64
[ 0.667181] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.667182] software IO TLB [mem 0x6f276000-0x73276000] (64MB) mapped at
[ffff88006f276000-ffff880073275fff]
[ 0.667410] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms
ovfl timer
[ 0.667411] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.667412] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.667412] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.667413] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.667413] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 0.667772] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2879c5f06f2, max_idle_ns: 440795220049 ns
[ 0.667991] simple-framebuffer simple-framebuffer.0: framebuffer at
0xb0000000, 0x1d5000 bytes, mapped to 0xffffc90001200000
[ 0.667993] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8,
mode=800x600x32, linelength=3200
[ 0.669031] Console: switching to colour frame buffer device 100x37
[ 0.669938] simple-framebuffer simple-framebuffer.0: fb0: simplefb
registered!
[ 0.670107] audit: initializing netlink subsys (disabled)
[ 0.670169] audit: type=2000 audit(1505140078.670:1): state=initialized
audit_enabled=0 res=1
[ 0.670397] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.671324] zbud: loaded
[ 0.672730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.672794] io scheduler noop registered
[ 0.672795] io scheduler deadline registered
[ 0.672815] io scheduler cfq registered (default)
[ 0.672815] io scheduler mq-deadline registered
[ 0.673449] intel_idle: MWAIT substates: 0x11142120
[ 0.673450] intel_idle: v0.4.1 model 0x9E
[ 0.673879] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.674036] GHES: HEST is not enabled!
[ 0.674097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.674558] Linux agpgart interface v0.103
[ 0.675312] ahci 0000:00:17.0: version 3.0
[ 0.685583] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xd
impl SATA mode
[ 0.685585] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum
part ems deso sadm sds apst
[ 0.691609] scsi host0: ahci
[ 0.691956] scsi host1: ahci
[ 0.692178] scsi host2: ahci
[ 0.692430] scsi host3: ahci
[ 0.692467] ata1: SATA max UDMA/133 abar m2048 at 0xdf42b000 port 0xdf42b100
irq 120
[ 0.692468] ata2: DUMMY
[ 0.692469] ata3: SATA max UDMA/133 abar m2048 at 0xdf42b000 port 0xdf42b200
irq 120
[ 0.692470] ata4: SATA max UDMA/133 abar m2048 at 0xdf42b000 port 0xdf42b280
irq 120
[ 0.692520] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 0.700454] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.700478] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.700674] mousedev: PS/2 mouse device common for all mice
[ 0.700688] rtc_cmos 00:02: RTC can wake from S4
[ 0.701095] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.701182] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 0.701189] intel_pstate: Intel P-state driver initializing
[ 0.701242] intel_pstate: Disabling energy efficiency optimization
[ 0.702151] intel_pstate: HWP enabled
[ 0.702529] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.702875] NET: Registered protocol family 10
[ 0.703096] Segment Routing with IPv6
[ 0.703106] mip6: Mobile IPv6
[ 0.703107] NET: Registered protocol family 17
[ 0.703889] microcode: sig=0x906e9, pf=0x20, revision=0x5e
[ 0.704176] microcode: Microcode Update Driver: v2.2.
[ 0.704182] sched_clock: Marking stable (704168419, 0)->(713515063,
-9346644)
[ 0.704454] registered taskstats version 1
[ 0.704464] zswap: loaded using pool lzo/zbud
[ 0.705455] rtc_cmos 00:02: setting system clock to 2017-09-11 14:27:59 UTC
(1505140079)
[ 0.997459] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.998233] ata1.00: ATA-8: HFS128G39MNC-3510A, 50100P00, max UDMA/133
[ 0.998235] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.998880] ata1.00: configured for UDMA/133
[ 0.999281] scsi 0:0:0:0: Direct-Access ATA HFS128G39MNC-351 0P00
PQ: 0 ANSI: 5
[ 0.999915] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.999990] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119
GiB)
[ 0.999998] sd 0:0:0:0: [sda] Write Protect is off
[ 1.000017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.000030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.001546] sda: sda1 sda2 sda3
[ 1.002218] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.004725] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.005360] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.006778] ata3.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133
[ 1.006781] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.008344] ata3.00: configured for UDMA/133
[ 1.008571] scsi 2:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0
PQ: 0 ANSI: 5
[ 1.008786] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/932 GiB)
[ 1.008788] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.008796] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.008798] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.008809] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.008838] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.038651] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 1.039482] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.039807] EXT4-fs (sda2): couldn't mount as ext3 due to feature
incompatibilities
[ 1.039973] EXT4-fs (sda2): couldn't mount as ext2 due to feature
incompatibilities
[ 1.043585] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.043593] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.045475] Freeing unused kernel memory: 1244K
[ 1.045476] Write protecting the kernel read-only data: 10240k
[ 1.046059] Freeing unused kernel memory: 1136K
[ 1.050970] Freeing unused kernel memory: 1952K
[ 1.141937] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.203772] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.203905] systemd[1]: Detected architecture x86-64.
[ 1.204125] systemd[1]: Set hostname to <labarbara>.
[ 1.279429] systemd[1]: Created slice System Slice.
[ 1.279504] systemd[1]: Listening on Syslog Socket.
[ 1.279551] systemd[1]: Listening on udev Control Socket.
[ 1.279631] systemd[1]: Listening on Journal Audit Socket.
[ 1.279680] systemd[1]: Reached target Remote File Systems.
[ 1.279718] systemd[1]: Listening on udev Kernel Socket.
[ 1.279788] systemd[1]: Created slice User and Session Slice.
[ 1.639816] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 1.650838] systemd-journald[132]: Received request to flush runtime journal
from PID 1
[ 1.671137] clocksource: Switched to clocksource tsc
[ 1.700664] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input0
[ 1.700911] ACPI: Lid Switch [LID0]
[ 1.700998] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.701019] ACPI: Sleep Button [SLPB]
[ 1.701069] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.701077] ACPI: Power Button [PWRB]
[ 1.701128] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.701137] ACPI: Power Button [PWRF]
[ 1.713394] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.722901] (NULL device *): hwmon_device_register() is deprecated. Please
convert the driver to use hwmon_device_register_with_info().
[ 1.723273] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.723274] ACPI: Thermal Zone [THRM] (51 C)
[ 1.723482] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.723483] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.723571] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.723572] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.728016] (NULL device *): hwmon_device_register() is deprecated. Please
convert the driver to use hwmon_device_register_with_info().
[ 1.730965] ACPI: bus type USB registered
[ 1.730981] usbcore: registered new interface driver usbfs
[ 1.730989] usbcore: registered new interface driver hub
[ 1.731022] usbcore: registered new device driver usb
[ 1.733247] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.733271] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.734950] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 1.736899] EFI Variables Facility v0.08 2004-May-17
[ 1.739098] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.739102] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 1.741113] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x00109810
[ 1.741313] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.741843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.741844] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.741845] usb usb1: Product: xHCI Host Controller
[ 1.741846] usb usb1: Manufacturer: Linux 4.13.1+labarbara xhci-hcd
[ 1.741847] usb usb1: SerialNumber: 0000:00:14.0
[ 1.742352] hub 1-0:1.0: USB hub found
[ 1.742584] hub 1-0:1.0: 16 ports detected
[ 1.747180] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.747183] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 1.747412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.747415] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.747417] usb usb2: Product: xHCI Host Controller
[ 1.747418] usb usb2: Manufacturer: Linux 4.13.1+labarbara xhci-hcd
[ 1.747419] usb usb2: SerialNumber: 0000:00:14.0
[ 1.747916] hub 2-0:1.0: USB hub found
[ 1.748136] hub 2-0:1.0: 8 ports detected
[ 1.751055] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.751060] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
number 3
[ 1.758777] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.759189] pstore: using zlib compression
[ 1.765176] pstore: Registered efi as persistent store backend
[ 1.782150] AVX2 version of gcm_enc/dec engaged.
[ 1.782151] AES CTR mode by8 optimization enabled
[ 1.800340] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 1.805878] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.810186] xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110
quirks 0x00000010
[ 1.810288] input: MSI WMI hotkeys as /devices/virtual/input/input7
[ 1.810693] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.810695] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.810696] usb usb3: Product: xHCI Host Controller
[ 1.810697] usb usb3: Manufacturer: Linux 4.13.1+labarbara xhci-hcd
[ 1.810698] usb usb3: SerialNumber: 0000:04:00.0
[ 1.810840] hub 3-0:1.0: USB hub found
[ 1.810851] hub 3-0:1.0: 2 ports detected
[ 1.810951] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.810955] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
number 4
[ 1.810980] usb usb4: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.810996] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.810998] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.810999] usb usb4: Product: xHCI Host Controller
[ 1.811000] usb usb4: Manufacturer: Linux 4.13.1+labarbara xhci-hcd
[ 1.811014] usb usb4: SerialNumber: 0000:04:00.0
[ 1.811134] hub 4-0:1.0: USB hub found
[ 1.811142] hub 4-0:1.0: 2 ports detected
[ 1.811246] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.811258] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 1.815123] [drm] Memory usable by graphics device = 4096M
[ 1.815124] checking generic (b0000000 1d5000) vs hw (b0000000 10000000)
[ 1.815125] fb: switching to inteldrmfb from simple
[ 1.815161] random: crng init done
[ 1.815949] Console: switching to colour dummy device 80x25
[ 1.816210] [drm] Replacing VGA console driver
[ 1.821222] Intel(R) Wireless WiFi driver for Linux
[ 1.821223] Copyright(c) 2003- 2015 Intel Corporation
[ 1.821271] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 1.822044] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.822045] [drm] Driver supports precise vblank timestamp query.
[ 1.823157] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet
[4c:cc:6a:83:27:7c]
[ 1.825655] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-29.ucode failed with error -2
[ 1.825669] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-28.ucode failed with error -2
[ 1.825678] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-27.ucode failed with error -2
[ 1.825688] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-26.ucode failed with error -2
[ 1.825696] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-25.ucode failed with error -2
[ 1.825704] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-24.ucode failed with error -2
[ 1.825713] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-3168-23.ucode failed with error -2
[ 1.828500] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode
iwlmvm
[ 1.828922] MXM: GUID detected in BIOS
[ 1.828948] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch -
Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 1.828985] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch
- Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 1.829069] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch
- Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 1.829237] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic
power, hda bios codec supported
[ 1.829242] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP
handle
[ 1.829242] nouveau: detected PR support, will not use DSM
[ 1.829264] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.829414] nouveau 0000:01:00.0: NVIDIA GP106 (136000a1)
[ 1.830335] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.831074] ACPI: Battery Slot [BAT1] (battery present)
[ 1.831606] ACPI: AC Adapter [ADP1] (on-line)
[ 1.842529] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin
(v1.1)
[ 1.842994] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 1.844531] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 1.847743] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.847981] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 1.848050] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 1.848086] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
[ 1.848240] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 1.850765] fbcon: inteldrmfb (fb0) is primary device
[ 1.954056] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC
3168, REV=0x220
[ 1.972732] iwlwifi 0000:02:00.0: base HW address: 30:e3:7a:6b:99:c8
[ 2.004203] ieee80211 phy0: Selected rate control algorithm
'iwl-mvm-rs'
[ 2.005424] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 2.107032] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 2.141669] nouveau 0000:01:00.0: bios: version 86.06.29.00.04
[ 2.185646] nouveau 0000:01:00.0: fb: 3072 MiB GDDR5
[ 2.189680] vga_switcheroo: enabled
[ 2.189811] [TTM] Zone kernel: Available graphics memory: 4030060 kiB
[ 2.189812] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.189812] [TTM] Initializing pool allocator
[ 2.189833] [TTM] Initializing DMA pool allocator
[ 2.189842] nouveau 0000:01:00.0: DRM: VRAM: 3072 MiB
[ 2.189843] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.189844] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 2.189845] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 2.189846] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.189847] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 2.189848] nouveau 0000:01:00.0: DRM: DCB outp 00: 02001f62 00020010
[ 2.189849] nouveau 0000:01:00.0: DRM: DCB outp 01: 04013f86 04600010
[ 2.189849] nouveau 0000:01:00.0: DRM: DCB outp 02: 04013f82 00020010
[ 2.189850] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010161
[ 2.189851] nouveau 0000:01:00.0: DRM: DCB conn 03: 01000346
[ 2.189851] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[ 2.231692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.231692] [drm] Driver supports precise vblank timestamp query.
[ 2.277374] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[ 2.277375] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[ 2.277376] usb 1-7: Product: MSI EPF USB
[ 2.277377] usb 1-7: Manufacturer: MSI EPF USB
[ 2.277377] usb 1-7: SerialNumber: MSI EPF USB
[ 2.307853] Adding 7812092k swap on /dev/sdb2. Priority:-1 extents:1
across:7812092k FS
[ 2.433008] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 2.449439] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.468190] psmouse serio1: synaptics: queried max coordinates: x [..5656], y
[..4728]
[ 2.477723] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.482037] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2.496942] psmouse serio1: synaptics: queried min coordinates: x [1284..], y
[1128..]
[ 2.496944] psmouse serio1: synaptics: The touchpad can support a better bus
than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB
are enabled to get a better touchpad experience.
[ 2.498701] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.511378] nouveau 0000:01:00.0: timeout
[ 2.511404] ------------[ cut here ]------------
[ 2.511447] WARNING: CPU: 5 PID: 188 at
drivers/gpu/drm/nouveau/nvkm/subdev/secboot/ls_ucode_msgqueue.c:184
acr_ls_sec2_post_run+0xd1/0x21b [nouveau]
[ 2.511447] Modules linked in: arc4 snd_hda_codec_realtek(+)
snd_hda_codec_generic iwlmvm nls_iso8859_15 nls_cp850 vfat fat mac80211
nouveau(+) x86_pkg_temp_thermal intel_powerclamp iwlwifi alx coretemp ttm mdio
kvm_intel cfg80211 mxm_wmi kvm msi_wmi sparse_keymap irqbypass crct10dif_pclmul
crc32_pclmul crc32c_intel evdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64
crypto_simd glue_helper cryptd efi_pstore psmouse atkbd i915 snd_hda_intel
serio_raw snd_hda_codec snd_hwdep efivars i2c_algo_bit snd_hda_core
drm_kms_helper syscopyarea snd_pcm sysfillrect xhci_pci sysimgblt snd_timer
fb_sys_fops xhci_hcd snd mei_me drm usbcore soundcore mei usb_common shpchp
i2c_i801 intel_pch_thermal thermal fan i2c_hid ac battery wmi hid video i2c_core
intel_lpss_acpi intel_lpss mfd_core button acpi_pad efivarfs
[ 2.511474] ip_tables x_tables autofs4
[ 2.511477] CPU: 5 PID: 188 Comm: systemd-udevd Not tainted 4.13.1+labarbara
#1
[ 2.511478] Hardware name: Micro-Star International Co., Ltd. GP62MVR
7RF/MS-16JB, BIOS E16JBIMS.310 07/31/2017
[ 2.511479] task: ffff880274f56580 task.stack: ffffc900016e4000
[ 2.511516] RIP: 0010:acr_ls_sec2_post_run+0xd1/0x21b [nouveau]
[ 2.511517] RSP: 0018:ffffc900016e7598 EFLAGS: 00010292
[ 2.511518] RAX: 000000000000001d RBX: ffff88026e93ec00 RCX: 0000000000000001
[ 2.511519] RDX: 0000000000000001 RSI: 0000000000000002 RDI: 00000000ffffffff
[ 2.511519] RBP: 0000000000000000 R08: 0000000872645f5c R09: ffff88027ee041cc
[ 2.511520] R10: ffffc900016e7590 R11: ffff88026fcde438 R12: ffff880274981b10
[ 2.511521] R13: ffff88026fcde400 R14: 0000000000000040 R15: ffff88026fdf2420
[ 2.511522] FS: 00007f16362ef8c0(0000) GS:ffff88027ed40000(0000)
knlGS:0000000000000000
[ 2.511523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.511523] CR2: 00007f428625dd64 CR3: 00000002735ca000 CR4: 00000000003406e0
[ 2.511524] Call Trace:
[ 2.511560] ? acr_r352_bootstrap+0x209/0x21d [nouveau]
[ 2.511594] ? acr_r352_reset+0x23/0x1c8 [nouveau]
[ 2.511631] ? gf100_gr_init_ctxctl+0x110/0x8ae [nouveau]
[ 2.511667] ? gp100_gr_init+0x62c/0x656 [nouveau]
[ 2.511694] ? nvkm_engine_init+0x129/0x154 [nouveau]
[ 2.511722] ? nvkm_subdev_init+0x114/0x186 [nouveau]
[ 2.511747] ? nvkm_engine_ref+0x32/0x59 [nouveau]
[ 2.511772] ? nvkm_ioctl_new+0x15d/0x208 [nouveau]
[ 2.511808] ? nvkm_fifo_chan_dtor+0xc0/0xc0 [nouveau]
[ 2.511844] ? gf100_gr_chan_new+0x224/0x224 [nouveau]
[ 2.511871] ? nvkm_ioctl+0x16d/0x1ca [nouveau]
[ 2.511897] ? nvif_object_init+0xc6/0x101 [nouveau]
[ 2.511934] ? nvc0_fbcon_accel_init+0x4c/0x3c3 [nouveau]
[ 2.511969] ? nouveau_fbcon_create+0x2f0/0x3ec [nouveau]
[ 2.511972] ? vprintk_emit+0x262/0x27c
[ 2.511974] ? printk+0x43/0x4b
[ 2.511980] ? drm_connector_list_iter_next+0x81/0x91 [drm]
[ 2.511984] ? drm_fb_helper_initial_config+0x229/0x31a [drm_kms_helper]
[ 2.512033] ? nouveau_fbcon_init+0x119/0x15f [nouveau]
[ 2.512087] ? nouveau_drm_load+0x643/0x773 [nouveau]
[ 2.512093] ? drm_dev_register+0xe3/0x1be [drm]
[ 2.512098] ? drm_get_pci_dev+0xdb/0x13f [drm]
[ 2.512133] ? nouveau_drm_probe+0x1df/0x1fe [nouveau]
[ 2.512136] ? __pm_runtime_resume+0x4b/0x55
[ 2.512138] ? local_pci_probe+0x39/0x7a
[ 2.512140] ? pci_device_probe+0x11d/0x156
[ 2.512142] ? driver_probe_device+0x1d4/0x3c0
[ 2.512143] ? __driver_attach+0xb4/0xd5
[ 2.512145] ? driver_probe_device+0x3c0/0x3c0
[ 2.512146] ? bus_for_each_dev+0x66/0x7d
[ 2.512147] ? bus_add_driver+0x131/0x217
[ 2.512148] ? driver_register+0x82/0xb4
[ 2.512149] ? 0xffffffffa05c8000
[ 2.512151] ? do_one_initcall+0x98/0x137
[ 2.512153] ? slab_pre_alloc_hook+0x15/0x3c
[ 2.512154] ? slab_post_alloc_hook.isra.61+0xa/0x1a
[ 2.512155] ? kmem_cache_alloc_trace+0xd1/0xe0
[ 2.512175] ? do_init_module+0x5b/0x1d3
[ 2.512176] ? load_module+0x1c7b/0x2338
[ 2.512178] ? check_version+0x106/0x106
[ 2.512180] ? SYSC_finit_module+0x9a/0xa5
[ 2.512180] ? SYSC_finit_module+0x9a/0xa5
[ 2.512182] ? do_syscall_64+0x54/0x61
[ 2.512184] ? entry_SYSCALL64_slow_path+0x25/0x25
[ 2.512184] Code: 76 2b 49 8b 7c 24 10 4c 8b 67 50 4d 85 e4 75 04 4c 8b 67 10
e8 0d 8e c6 e0 4c 89 e2 48 c7 c7 42 47 7b a0 48 89 c6 e8 c0 39 98 e0 <0f>
ff 41 80 e6 10 0f 84 fc 00 00 00 83 7b 48 03 76 1f 8b 43 20
[ 2.512198] ---[ end trace 4250ab84830e3651 ]---
[ 2.528903] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 2.552684] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id:
0x1e2b1, caps: 0xf00323/0x840300/0x26800/0x0, board id: 3163, fw id: 2286728
[ 2.589051] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input6
[ 2.601983] usb 1-10: New USB device found, idVendor=8087, idProduct=0aa7
[ 2.601987] usb 1-10: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.758009] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[ 2.926630] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[ 2.926633] usb 1-12: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.926634] usb 1-12: Product: USB2.0-CRW
[ 2.926636] usb 1-12: Manufacturer: Generic
[ 2.926637] usb 1-12: SerialNumber: 20100201396000000
[ 2.931704] usbcore: registered new interface driver usbhid
[ 2.931705] usbhid: USB HID core driver
[ 2.933416] hid-generic 0003:1770:FF00.0001: hiddev0,hidraw0: USB HID v1.10
Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-7/input0
[ 2.933869] usbcore: registered new interface driver rtsx_usb
[ 2.955508] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898:
line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker
[ 2.955510] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 2.955512] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 2.955513] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.955515] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 2.955516] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.955518] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 2.955519] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.970415] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 2.970590] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 2.981412] Bluetooth: Core ver 2.22
[ 2.981429] NET: Registered protocol family 31
[ 2.981429] Bluetooth: HCI device and connection manager initialized
[ 2.981433] Bluetooth: HCI socket layer initialized
[ 2.981435] Bluetooth: L2CAP socket layer initialized
[ 2.981440] Bluetooth: SCO socket layer initialized
[ 2.984420] usbcore: registered new interface driver btusb
[ 2.994411] Bluetooth: hci0: read Intel version: 370810225019140f19
[ 2.994412] Bluetooth: hci0: Intel device is already patched. patch num: 19
[ 3.184723] Console: switching to colour frame buffer device 240x67
[ 3.208178] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.234981] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.234981] Bluetooth: BNEP filters: protocol multicast
[ 3.234984] Bluetooth: BNEP socket layer initialized
[ 3.334230] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.403958] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.485901] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.537370] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.743407] [drm] RC6 on
[ 4.575210] nouveau 0000:01:00.0: secboot: error during falcon reset: -110
[ 4.575278] nouveau 0000:01:00.0: gr: init failed, -110
[ 4.576395] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo
ffff88026e2c4000
[ 4.576702] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 4.576757] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on
minor 1
[ 4.764665] nouveau 0000:01:00.0: gr: FECS falcon already acquired by gr!
[ 4.764667] nouveau 0000:01:00.0: gr: init failed, -16
[ 7.092888] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7.116694] wlp2s0: authenticate with 00:03:61:a2:9a:c2
[ 7.121222] wlp2s0: send auth to 00:03:61:a2:9a:c2 (try 1/3)
[ 7.123376] wlp2s0: authenticated
[ 7.124063] wlp2s0: associate with 00:03:61:a2:9a:c2 (try 1/3)
[ 7.127737] wlp2s0: RX AssocResp from 00:03:61:a2:9a:c2 (capab=0x431 status=0
aid=9)
[ 7.129041] wlp2s0: associated
[ 7.129059] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 10.719190] nouveau 0000:01:00.0: DRM: suspending console...
[ 10.719194] nouveau 0000:01:00.0: DRM: suspending display...
[ 10.719214] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 10.725958] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go
idle...
[ 10.725976] nouveau 0000:01:00.0: DRM: suspending fence...
[ 10.731261] nouveau 0000:01:00.0: DRM: suspending object tree...
[ 32.943131] nouveau 0000:01:00.0: Refused to change power state, currently in
D3
[ 33.003582] nouveau 0000:01:00.0: Refused to change power state, currently in
D3
[ 33.003586] nouveau 0000:01:00.0: Refused to change power state, currently in
D3
[ 33.003588] nouveau 0000:01:00.0: DRM: resuming object tree...
-------------- next part --------------
00:00.0 Host bridge: Intel Corporation Device 5910 (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 11d5
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: de000000-df0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
(prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 11d5
Flags: bus master, fast devsel, latency 0, IRQ 125
Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
Memory at b0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI
Controller (rev 31) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H USB
3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 122
Memory at df410000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal
subsystem (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H
Thermal subsystem
Flags: fast devsel, IRQ 18
Memory at df42e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1
(rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H CSME
HECI
Flags: bus master, fast devsel, latency 0, IRQ 121
Memory at df42d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI
mode] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H SATA
Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 120
Memory at df428000 (32-bit, non-prefetchable) [size=8K]
Memory at df42c000 (32-bit, non-prefetchable) [size=256]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at df42b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1
(rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: df300000-df3fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4
(rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df200000-df2fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5
(rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: df100000-df1fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H LPC
Controller
Flags: bus master, medium devsel, latency 0
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H PMC
Flags: fast devsel
Memory at df424000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.3 Audio device: Intel Corporation Device a171 (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 11d6
Flags: bus master, fast devsel, latency 32, IRQ 126
Memory at df420000 (64-bit, non-prefetchable) [size=16K]
Memory at df400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
Subsystem: Micro-Star International Co., Ltd. [MSI] Sunrise Point-H
SMBus
Flags: medium devsel, IRQ 16
Memory at df42a000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] GP106M [GeForce GTX
1060]
Flags: bus master, fast devsel, latency 0, IRQ 124
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
Expansion ROM at df000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
02:00.0 Network controller: Intel Corporation Device 24fb (rev 10)
Subsystem: Intel Corporation Device 2110
Flags: bus master, fast devsel, latency 0, IRQ 123
Memory at df300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Ethernet controller: Qualcomm Atheros Device e0b1 (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 11d5
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at df200000 (64-bit, non-prefetchable) [size=256K]
I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
Kernel modules: alx
04:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller
(prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] ASM1142 USB 3.1 Host
Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at df100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
Tobias Klausmann
2017-Sep-11 18:49 UTC
[Nouveau] Nouveau: kernel hang on Optimus+Intel+NVidia GeForce 1060m
Hi, i remember seeing the same error with earlier firmware version with a similar system (GP106) once in a while on boot, yet it does not happen with newer versions. Maybe you could try to update the firmware to the latest version from kernel-firmware. As a small addition: I remember deeply: you should ignore the _OSI(Linux) query, as it may break the system in some ways, if you don't have a specific bug fixed with adding _OSI(Linux), removing it from the cmdline is a thing to test! Greetings, Tobias On 9/11/17 4:54 PM, Nicolas Mercier wrote:> Hi, > I have an Optimus-enabled laptop with a GTX 1060m. I never got it to > fully work with Nouveau even after Pascal support was added. I need to > run the kernel with nouveau.runpm=0 to get it to work. Unfortunately > without proper power mangement support, my laptop will run out of > battery after about 1h30, so I'd love to get Optimus working. > > What I can see is that when the extra GPU is not in use, Nouveau will > try to shut it off. This seems to work, as the indicator of the laptop > changes to amber (discrete GPU in use) to blue (discrete GPU powered > off), and the kernel log (attached) reports that the GPU went off. > > If I wake up the GPU (plugging in/out the external monitor, running a > GL command with DRI_PRIME=1, or even lspci) will make the computer > unresponsive and only a force shutdown will work, as no graphics > command seems to be able to execute anymore. Nouveau (likely, vga > switcheroo) tries to wake up the GPU but it seems to fail. The LED > indicator does indicate the GPU has power though. > > Most of the time (but not often when I have an external monitor > plugged into the discrete card before I boot the computer) I get a > timeout during boot or during modprobe (see kernel log). Even with > runpm=0, I can't seem to be able to run GL commands on it: > > yngwe at labarbara: % DRI_PRIME=1 glxinfo > name of display: :0.0 > nvc0_screen_create:857 - Error allocating PGRAPH context for M2MF: -16 > libGL error: failed to create dri screen > libGL error: failed to load driver: nouveau > display: :0 screen: 0 > direct rendering: Yes > ... follows up using the Intel card ... > > the error I get in the kernel in that case: > [ 201.612583] nouveau 0000:01:00.0: gr: FECS falcon already acquired > by gr! > [ 201.612586] nouveau 0000:01:00.0: gr: init failed, -16 > > It runs on Debian testing + the firmware from Ubuntu as Debian's > firmware does not have the nvidia blobs, kernel was either 4.12/4.13 > release candidates from Debian repositories or kernel 4.13.1 self > compiled. I always had exactly the same symptoms on all these kernels. > > /nicolas > > > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/nouveau
Nicolas Mercier
2017-Sep-11 19:52 UTC
[Nouveau] Nouveau: kernel hang on Optimus+Intel+NVidia GeForce 1060m
Hi Tobias, On Mon, Sep 11, 2017 at 8:49 PM, Tobias Klausmann < tobias.johannes.klausmann at mni.thm.de> wrote:> Hi, > > i remember seeing the same error with earlier firmware version with a > similar system (GP106) once in a while on boot, yet it does not happen > with newer versions. Maybe you could try to update the firmware to the > latest version from kernel-firmware. >Thanks for the suggestion Tobias. I updated the firmware (pulled it down straight from Git) but unfortunately i got the exact same result.> As a small addition: I remember deeply: you should ignore the > _OSI(Linux) query, as it may break the system in some ways, if you don't > have a specific bug fixed with adding _OSI(Linux), removing it from the > cmdline is a thing to test! >Actually I tried both with and without, it just happens that I forgot to remove it after many tests. I read also that it is better to not add _OSI(Linux) so I completely agree, I will take it out again. -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20170911/4066e970/attachment.html>
Maybe Matching Threads
- Bug#810070: XEN Hypervisor crashes/reboots at Startup after "Scrubbing Free Ram"
- [Bug 83271] New: Windowed mode causes framebuffer not to refresh with PRIME on optimus/kepler discrete GPU
- BTRFS crash on mount with 3.4.4
- [RFC PATCH v2 0/7] stabilize kepler reclocking
- IO error after s2ram resume; device stays open