search for: callprogess

...if I get an incoming call through my bt line, and the remote party hangs up, I get approx 20secs of the bt line hungup tone before asterisk hangs up, which leads (if nothing else) to the well documented 20secs of beep on vm problem :) I have tried: busydetect=yes / busycount=7 / other busycounts / callprogess=yes but none of these make any difference. I have loadzone/defaultzone=uk and country=uk in indications.conf and fxs_ks signalling. I've seen mention of the different BUSYDETECT flags in the * Makefile, but I can't seem to find exactly what they do, or whether they're likely to improv...

...#39;s in, and both cards have the same strange problem. After 2min 40seconds (always: within +/- 1sec) they drop an outbound call. Inbound calls are not affected... they stay up as long as required. I've seen a fair bit of chatter about similar kinds of problems sometimes being related to callprogess detecting false hang-ups, so I've made sure this is disabled in Zapata.conf but it seems to have had no effect. I was running a slightly older version of zaptel/asterisk (1.2.0) and I've upgraded to the lastest build, but also with no success. Anyone's thoughts very much appreci...

...o be ok with it, but the other one when an extension picks up there is no one there and the incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like someone had suggested, but it didn't do anything. I also upgraded zaptel to the latest. 1.2.18 and asterisk is running at 1.2.14. callprogess is set to no, as well as busydetect=no. This is a major problem since this box only has 1 other line, but at least it works. I can't seem to find much info on this issue. I can't believe others haven't run into it. I started a ticket with digium, but I guess they are pretty backed up....

Hi, I'm trying to get asterisk to auto-dail out. I created a *.call file with the the top of it being "Channel: Zap/1/2609944", which should have connected to Zap channel 1 and dial out to 2609944, but It did not do so, asterisk would say a call was completed to Zap/1/2609944 but I never heard that phone ring. So I tried just putting "Channel: Zap/1" at the top of

...l be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) immediate=no callprogess=yes ;busydetect=yes busydetect=no context=from-pstn switchtype=euroisdn signalling=pri_cpe group=0 channel => 1-15,17-31 --- Regards Daniel Leese