search for: c6d0

.../pci at 0,0/pci-ide at 1f,2/ide at 1/cmdk at 0,0 1. c3d1 <DEFAULT cyl 60797 alt 2 hd 255 sec 126> /pci at 0,0/pci-ide at 1f,2/ide at 1/cmdk at 1,0 2. c4d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 126> /pci at 0,0/pci-ide at 1f,5/ide at 0/cmdk at 0,0 3. c6d0 <WDC WD10- WD-WMAV5012875-0001-931.51GB> /pci at 0,0/pci-ide at 1f,2/ide at 0/cmdk at 0,0 4. c6d1 <WDC WD10- WD-WMAV5011699-0001-931.51GB> /pci at 0,0/pci-ide at 1f,2/ide at 0/cmdk at 1,0 root at nas:~# zpool status pool: rpool state: ONLINE scrub: none req...

...'zpool clear''. see: http://www.sun.com/msg/ZFS-8000-HC scrub: scrub in progress for 0h49m, 0.00% done, 7059912h41m to go config: NAME STATE READ WRITE CKSUM tank DEGRADED 28 0 0 raidz1-0 DEGRADED 183 13 6 c6d0 ONLINE 0 0 0 c7d0 DEGRADED 9 214 22 too many errors c7d1 DEGRADED 13 27 0 too many errors errors: 28 data errors, use ''-v'' for a list When I use the -v option to see the errors I get stuff like this:...

...CKSUM raidpool ONLINE 0 0 0 raidz ONLINE 0 0 0 c2d0 ONLINE 0 0 0 c3d0 ONLINE 0 0 0 c4d0 ONLINE 0 0 0 c5d0 ONLINE 0 0 0 c6d0 ONLINE 0 0 0 c6d1 ONLINE 0 0 0 c7d0 ONLINE 0 0 0 c7d1 ONLINE 0 0 0 errors: The following persistent errors have been detected: DATASET OBJECT RANGE ac 0 lvl=0...

...resilver completed after 0h7m with 38 errors on Sun Mar 29 18:37:28 2009 config: NAME STATE READ WRITE CKSUM z3 DEGRADED 0 0 40 mirror DEGRADED 0 0 80 c5d0 DEGRADED 0 0 80 too many errors c6d0 DEGRADED 0 0 80 too many errors This is that last thing and apparently the result of a series of steps I''ve taken to increase a zpool mirrors size. There was quite a lot of huffing and puffing with the sata controller that holds this mirror but the short version is: zpool...

...CKSUM export ONLINE 0 0 0 mirror ONLINE 0 0 0 c3d0 ONLINE 0 0 0 c1d0 ONLINE 0 0 0 mirror ONLINE 0 0 0 c4d0 ONLINE 0 0 0 c6d0 ONLINE 0 0 0 mirror ONLINE 0 0 0 c7d0 ONLINE 0 0 0 c8d0 ONLINE 0 0 0 mirror ONLINE 0 0 0 c9d0 ONLINE 0 0 0 c10d0 ONLINE 0...

...58,5004 at 2,2/cdrom at 1/disk at 0,0 tagra err sil3114 c5d0 ST332062-9QF6EPB-0001-298.09GB /pci at 0,0/pci10de,6c at 8/pci-ide at 6/ide at 0/cmdk at 0,0 tagra sil3114 c5d1 ST332062-9QF6ENL-0001-298.09GB /pci at 0,0/pci10de,6c at 8/pci-ide at 6/ide at 0/cmdk at 1,0 tagra sil3114 c6d0 ST332062-9QF6CYK-0001-298.09GB /pci at 0,0/pci10de,6c at 8/pci-ide at 6/ide at 1/cmdk at 0,0 tagra err sil3114 c6d1 Hitachi-STF202MC00VYR-0001-298.09GB /pci at 0,0/pci10de,6c at 8/pci-ide at 6/ide at 1/cmdk at 1,0 tagra ide c7d0 ST332062-5QF2WBD-0001-298.09GB /pci at 0...

...p 518M # 2 /usr 10240M # 3 /var 10240M # 4 /opt 10240M # 7 /export/home ... whatever is left formatted my flashdisks with 2 identical unamed slices (s0) of 969M Installed everything on that temporary install disk (c0t0d0) zpool create -f datapool raidz2 /dev/dsk/c4d0 /dev/dsk/c5d0 /dev/ dsk/c6d0 /dev/dsk/c7d0 zfs create datapool/usr zfs create datapool/opt zfs create datapool/var zfs create datapool/home zfs set mountpoint=legacy datapool/usr zfs set mountpoint=legacy datapool/opt zfs set mountpoint=legacy datapool/var zfs set mountpoint=legacy datapool/home zfs create -V 2g datapool/swa...

...l reported no troubles except suggesting upgrade for from ver.10 to ver.11. seemed like a good idea at the time. system up for several days after that point then took down for some unrelated maintenance. now will not boot the opensol, drops to grub prompt, no menus. zfs was mirrored on two disks c6d0s0 and c7d0. I never noted the GRUB commands for booting and not really familiar with the nomenclature. at this point I am hoping that a burn of SXCE snv_94 will give me access to the zfs pools so I can try "update-grub" but at this point it will be about 9 hours to download the .iso an...