search for: c2600

A little off-topic: I have the following hardware: 2610 XM NM-2V VIC-2BRI NT/TE IOS loaded: flash:c2600-ipvoice-mz.123-5d.bin" I get the following error while booting: %C542-1-UNKNOWN_VIC: VNM(1), vic daughter card has an unknown id of FF Is the VIC-2BRI compatible with the 2610XM? What IOS needs to be loaded? http://www.cisco.com/en/US/products/hw/modules/ps2641/products_tech_note0918 6a0080...

...for change my song Why ? The termination this connection is good When I call from PSTN I can chose everything what want but I have this same problem with amount pressed butons (also twice) Addictionaly I have a problem with terminate this connection When I hang up the port on my VoIP/Gateway (C2600 + FXO ) is still busy. NOTICE[16398]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support incomplete. Turn off on client if possible NOTICE[16398]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support incomplete. Turn off on client if possible NOTICE[16398]: File rtp.c, Line 221 (process_...

Hi all I have a rather odd problem that I hope somebody can shed some light on. I have a Asterisk server (1.0.7) that is connected to a Cisco 2600 router (c2600-is-mz.122-28a) fitted with an E1 card. The E1 is configured for QSig and is conencted to our local Ericsson MD110 which goes out to the PSTN. We have a DID range assigned to the E1 and can make and receive calls from/to SIP attached phones through this gateway setup. The problem i have is with...

Ok here is a question that has gotten me stumped. I have an Asterisk system up and running. I need to connect it via the Internet to a Sip Cisco system. This is what they have. I have there IP address's and login. X-lite is able to connect to them and make a call! So I have the name right! CISCO router model: 2621 VoIP module: NM-HDA-4FXS I have done Google lookup and at the Wiki about

...her Fedora Core 6 box which turned out to be a nightmare (missing libraries, the OpenH323 libraries appear to be deprecated in favour of Opal? conflicting versions of pwlib, problems with yacc/bison building the ASN.1 parser, etc. etc.) so next I turned to Cisco. I have a spare 2621XM router with c2600-jsx-mz.123-22.bin which includes a H.323 gatekeeper... great... so I've configured it up (all three lines of it :o) so far: ! gatekeeper zone local TETRA tubby.org 192.168.1.6 no shutdown ! and can get both Asterisk and the Damm TETRA equipment to register with the Gatek...

I'm stuck running a old copy of asterisk because something strange is going on in later versions of the CVS.. When I call in from a PSTN into my cisco 2610XM gateway which then routes the call to my asterisk box via sip.. Asterisk can no longer process DTMF tones generated by the calling party. This affects DISA, prompts and menus.. Has anyone else had this problem?? and use.. I DO have

...ed on the hope of using the GNU GateKeeper 2.2.5 but ran into lots of problems on my Fedora Core 6 box with libraries, incompatibilities, compilation errors, the fact that OpenH323 appears deprecated in favour of Opal, etc. and in the end gave up and switched to a spare Cisco 2621XM router with c2600-jsx-mz.123-22.bin image which includes the Cisco H.323 Gatekeeper... The I started reading the documentation and got entirely confused :o( Nearly all of Cisco's examples show one gateway connected to one gatekeeper in a local zone and may routes to other zones that are 'remote', ie....

...(unspecified reason) and so closes the session. At this point the H.323 session is lost and never retried. The set up is as follows: Asterisk Box: RedHat/Fedora Core 3, Asterisk 1.2.14 (built from source), ooh323 rev 0.8.2 from Asterisk-Addons-1.2.5 Cisco GateKeeper: 2621XM router with c2600-jsx-mz.123-22.bin Config on Asterisk box: ; Objective System's H323 Configuration example for Asterisk ; ooh323c driver configuration ; ; [general] section defines global parameters ; ; This is followed by profiles which can be of three types - user/peer/friend ; Name of the user profile sho...

...ve researched the max resources for the 2621 on both \n Google and Cisco\'s website and have gotten mixed results. What\'s \n the definitive maximum flash and DRAM for this router? Does anyone \n else have any ideas for running a PPPoE client on this router rather than \n running \n c2600-adventerprisek9-mz.123-4.xd1? Thanks J \u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d...

I just inherited a Cisco 2621 with a VWIC-1MFT-T1 card in it. Can I make this thing into MGCP gateway or even a SIP gateway for asterisk? Seems like it should bee useful for something! I'm perfectly happy to do my homework, but also don't feel thee need to reinvent the wheel! So, links with relevant info would be appreciated. If there is a config for a 2621 being used as a gateway