A little off-topic: I have the following hardware: 2610 XM NM-2V VIC-2BRI NT/TE IOS loaded: flash:c2600-ipvoice-mz.123-5d.bin" I get the following error while booting: %C542-1-UNKNOWN_VIC: VNM(1), vic daughter card has an unknown id of FF Is the VIC-2BRI compatible with the 2610XM? What IOS needs to be loaded? http://www.cisco.com/en/US/products/hw/modules/ps2641/products_tech_note0918 6a0080111b16.shtml --- Jan Baggen - jbaggen@ip2.nl IP2 Internet BV / http://www.ip2.nl
Hi,>Is the VIC-2BRI compatible with the 2610XM? What IOS needs to be loaded?I'm not sure about the 2610XM, but the V1 with a VIC-2BRI work's fine in a C3620 with a PLUS image, c3620-is-mz.122-15.T1.bin Greetings, Andreas _________________________________________________________________ Surf the net and talk on the phone with Xtra JetStream @ http://xtra.co.nz/jetstream
You may see this error when you first part of the boot up before it loads the 12.3.5 image. I've seen this error with other wic interfaces. The interface should work fine. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jan Baggen Sent: Thursday, September 23, 2004 6:31 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Cisco 2610XM and Asterisk A little off-topic: I have the following hardware: 2610 XM NM-2V VIC-2BRI NT/TE IOS loaded: flash:c2600-ipvoice-mz.123-5d.bin" I get the following error while booting: %C542-1-UNKNOWN_VIC: VNM(1), vic daughter card has an unknown id of FF Is the VIC-2BRI compatible with the 2610XM? What IOS needs to be loaded? http://www.cisco.com/en/US/products/hw/modules/ps2641/products_tech_note0918 6a0080111b16.shtml --- Jan Baggen - jbaggen@ip2.nl IP2 Internet BV / http://www.ip2.nl _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users