search for: c0d0p2

Hi, Im trying to set create a RHAS4 DomU on a HP proliant 360DL 4 processor SMP. Since the xenified kernel that came with FC4 didnt work, I compiled a xen-unstable enabled kernel for FC4. all was fine untill it gave me a ''unable to open an initial console'' I tried to make an initrd for my xen0 kern but it didnt work. So I tried using the old initrd image that I had and Dom0

...''m doing one emergencial migrate for one very old machine, because we will have one IMPLOSION (!!!) very close from here, and I''m thinking that this old IDE disk will not survive... :-/ [root@registro-2 /root]# df -h Filesystem Size Used Avail Use% Mounted on /dev/ida/c0d0p2 3.8G 2.3G 1.4G 62% / /dev/ida/c0d0p8 26G 20G 4.4G 82% /data /dev/ida/c0d0p6 984M 128k 934M 0% /tmp /dev/ida/c0d0p7 984M 166M 768M 18% /var Red Hat Linux release 6.2 (Zoot) Kernel 2.4.16 on a 4-processor i686 I did one copy with ''dd'' of devi...

Hi In our office environment few servers mostly database servers and yesterday it happened for one application server(first time) the partion is getting "read only". I was checking the archives, found may be similar kind of issues in the 2007-July archives. But how it has been solved if someone describes me that will be really helpful. In our case, just at the problem started found

All, We are encountering spurious errors with ext3. After some period of heavy IO we may see messages similiar to: EXT3-fs error (device cciss/c0d0p5) in start_transaction: Journal has aborted When this happens the filesystem is remounted read-only. If it's the root filesystem the system becomes unresponsive and must be rebooted. An fsck on the affected filesystem shows lots of corruption.

...ing one manually. In each case, the machine hangs after the "Uncompressing linux..." message comes up on the console. I have tried booting with 2.4.9-34 kernel with similar results. Disk Config: [root@la_app2 opt]# df -h Filesystem Size Used Avail Use% Mounted on /dev/ida/c0d0p2 3.8G 2.9G 768M 80% / /dev/ida/c0d0p7 6.4G 414M 5.6G 7% /opt none 1.0G 0 1.0G 0% /dev/shm /dev/ida/c0d0p6 2.5G 134M 2.2G 6% /var [root@la_app2 opt]# mount /dev/ida/c0d0p2 on / type ext3 (rw) none on /proc type proc (rw) none on /dev/pts type dev...

Yes, I know 3.5 is old. However in this case it's required for a legacy app. a fresh install get's me: kmod: failed to exec /sbin/modprobe -s -k block-major-104, errno = 2 followed by: VFS: Cannot open root device "cciss/c0d0p2" or 68:02 The system is an HP DL380 G4. any thought on what could cause this? the rescue system is able to mount the disk and grub-install works to re-install grub on the device. TIA Bruce Ferrell

.../dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 LABEL=SW-cciss/c0d0p2 swap swap defaults 0 0 My file system details is [root@sdcsrvint002 ~]# fdisk -l Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start...

Hello all, I''m trying to pass my PCI device through to an HVM. I''m following the steps on the xen pci passthrough wiki. First I check my pci devices #lspci - 03:00.0 VGA compatible controller: ATI Technologies Inc Device 671d 03:00.1 Audio device: ATI Technologies Inc Device aa80 04:00.0 Display controller: ATI Technologies Inc Device 671d 04:00.1 Audio device: ATI

I have xen 3.04 running on SLES10SP1. It''s working great, but I''m wondering if I have some memory issues with dom0. I have 7 domU''s, 1 is win2k, the other 6 are win2k3. I''ve had a lot of machines up and down with a reboot of dom0 in quite a while. I''m wondering if dom0 has not given up memory during the process. I added 5 win2k3 domU''s today.

I'm trying to setup a LVM mirror on 2 iSCS targets, but can't. I have added both /dev/sda & /dev/sdb to the LVM-RAID PV, and both have 500GB space. [root at HP-DL360 by-path]# pvscan PV /dev/cciss/c0d0p2 VG LVM lvm2 [136.59 GB / 2.69 GB free] PV /dev/sda VG LVM-RAID lvm2 [500.00 GB / 490.00 GB free] PV /dev/sdb VG LVM-RAID lvm2 [502.70 GB / 492.70 GB free] Total: 3 [1.11 TB] / in use: 3 [1.11 TB] / in no VG: 0 [0 ] [root at HP-DL360 by-path]# vgscan Re...

.../data ext3 defaults,acl 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/cciss/c0d0p2 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0 /dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0 My server samba is integrated with the server windows 2003 (PDC). The serve...

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

...- if [ "gpt" = "$LABEL_TYPE" ]; then - log "Running gptsync to create legacy mbr" - gptsync "$ROOTDRIVE" + partpv="${drv}${hostvgpart}" + if [ ! -e "$partpv" ]; then + # e.g. /dev/cciss/c0d0p2 + partpv="${drv}p${hostvgpart}" fi - fi + log "Creating physical volume" + if [ ! -e "$partpv" ]; then + log "$partpv is not available!" + exit 1 + fi + dd if=/dev/zero of="${partpv...

...l Disk /dev/cciss/c0d0: 36.4 GB, 36414750720 bytes 255 heads, 63 sectors/track, 4427 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 * 1 13 104391 83 Linux /dev/cciss/c0d0p2 14 4427 35455455 8e Linux LVM Disk /dev/cciss/c0d1: 218.5 GB, 218513571840 bytes 2 heads, 4 sectors/track, 53348040 cylinders Units = cylinders of 8 * 512 = 4096 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d1p1...

...4 lvm on" parted $DRIVE -s "print" udevadm settle 2> /dev/null || udevsettle @@ -356,11 +367,11 @@ perform_partitioning() fi partboot=${DRIVE}1 - partpv=${DRIVE}2 + partpv=${DRIVE}4 if [ ! -e "$partpv" ]; then # e.g. /dev/cciss/c0d0p2 partboot=${DRIVE}p1 - partpv=${DRIVE}p2 + partpv=${DRIVE}p4 fi log "Creating physical volume" if [ ! -e "$partpv" ]; then @@ -388,15 +399,6 @@ perform_partitioning() mkswap -L "SWAP" /dev/HostVG/Swap echo "/d...

...rqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util cciss/c0d0 0.00 0.00 0.00 169.00 0.00 1640.00 19.41 2.00 11.74 5.94 100.40 cciss/c0d0p1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 cciss/c0d0p2 0.00 0.00 0.00 169.00 0.00 1640.00 19.41 2.00 11.74 5.94 100.40 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00...

...> <device id="0" name="/dev/cciss/c0d0p1" sharename=""> <mount forceunmount="yes" fstype="ext3" mountpoint="/vol1" options="rw"/> </device> <device id="1" name="/dev/cciss/c0d0p2" sharename=""> <mount forceunmount="yes" fstype="ext3" mountpoint="/vol2" options="rw"/> </device> <device id="2" name="/dev/cciss/c0d0p5" sharename=""> <mount forceunmou...

...then + log "Running gptsync to create legacy mbr" + gptsync "$ROOTDRIVE" + fi fi - partpv=${HOSTVGDRIVE}${hostvgpart} + partpv="${HOSTVGDRIVE}"${hostvgpart} if [ ! -e "$partpv" ]; then # e.g. /dev/cciss/c0d0p2 - partpv=${HOSTVGDRIVE}p${hostvgpart} + partpv="${HOSTVGDRIVE}"p${hostvgpart} fi log "Creating physical volume" if [ ! -e "$partpv" ]; then -- 1.6.6.1

.../boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/cciss/c0d0p2 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom iso9660 noauto,owner,kudzu,ro 0 0 /dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0

...<device id="0" name="/dev/cciss/c0d0p1" sharename=""> <mount forceunmount="yes" fstype="ext3" mountpoint="/vol1" options="rw"/> </device> <device id="1" name="/dev/cciss/c0d0p2" sharename=""> <mount forceunmount="yes" fstype="ext3" mountpoint="/vol2" options="rw"/> </device> <device id="2" name="/dev/cciss/c0d0p5" sharename=""> <mount fo...