search for: busydetected

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

Hi guys. I have a XP100P Clone , and the busydetect dont work for me.. PSTN---Asterisk---Sip---Asterisk----PBX Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work... Please Help me. Zapata.conf [channels] echocancel=yes usecallerid=no hidecallerid=no rxgain=0.0 txgain=0.0 signalling=fxs_ks callprogress=no context=entrada channel=>1

Hi All, This isn't really a question, but it's an issue I experienced that was driving me crazy for a few days, so I thought it might be good for the archives. Basically what was happening was everytime a particular customer called (long distance), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still

Well, I thought and hoped my issue of random hangups on our TDM400P were related to busydetect=yes in zapata.conf. The behavior of a call being hungup has not changed, however, since setting the busydetect option to 'no'. Again, the only affected user is my loud talker... What are some causes/solutions to seemingly random call disconnects on Zap channels that people have seen? I have

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

Hello, I've commited the new busydetect routine to CVS. You need to cvs update asterisk of course and then choose it in asterisk/Makefile and recompile asterisk. All you X100P users that had the problems with false hangups or the card not being able to detect the busy tone please check that. In the asterisk/Makefile you need to find a line BUSYDETECT = and uncomment what you want/ comment

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

simple setup... two * boxen, X100P in each pots(1) --> ZAP/1 --> *(1) --> IAX2 --> *(2) --> ZAP/1 --> pots(2) with busydetect=yes and callprogress=yes in zapata.conf, calling from pots(1) through to pots(2) we get the following -- Zap/1-1 is ringing -- Zap/1-1 is ringing etc, and if nobody picks up, then it timeouts and hangups, good however, if during the ringing,

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

Hi there, I got really tired of false hangups, specially when someone calls from SIP/IAX/whatever to PSTN, which makes no sense in using busydetect in the zap channel, as the caller will eventually hear the busy tones and hangup, causing the zap channel to be "freed" as well... After suggesting that the busy detect be enabled only for inbound calls, and finding other people that think

My telco doesn't provide Disconnect Supervision or Polarity Change. So I figured I have to detect hangups with busydetect=yes in zapata.conf. I tested it. When the telco sends a busy tone * detects it and hangsup. So far so good. The problem is the telco doesn't always send a busy after remote hangup. Most of the time it sends a congestion tone. I am guessing these tones from what I

Hi All; Why busydetect=yes caused this autmatic hangup happens without any reson (while responding to entering the digits in the IVR) I do not know! And what is the solution I do not know. I used busydetect=yes and busycount=5 in zapata.conf to help me in hangup when detect the busy tone, but I faced the following problem: While I am calling to the Asterisk PBX, and during the response for the

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"

The FXO lines on my TDM400 are connected to PSTN lines in Israel. As far as I know, the lines around here have disconnect supervision (I've seen some other Israelis on this list, anyone know for sure?), because it's worked on Dialogic cards, which reported hangup, not busy detect (while when I connect a Dialogic card to a PBX, I have to measure the busy signal's frequency/cadence or

Hi Guys, I am getting a complain that call on analogue lines (Sangoam A400D) drops all of a sudden. Here is what I see in logs: [Jul 28 15:49:08] DEBUG[21438] dsp.c: ast_dsp_busydetect detected busy, avgtone: 75, avgsilence 135 [Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing [h at macro-dialout-trunk:1] Macro("SIP/2111-b6a400b0", "hangupcall|") in new stack [Jul

When I enable callprogress I get this error message... (when I call, it will ring forever but asterisk is acting as if it DID pick up the line ... but it never did... ) I'm beginning to think that asterisk can't hangup the line when in voice mail and this, whatever action I'll take... Actually, callprogress doesn't seem to work at all... (in my case) Mar 24 23:37:28

Hi, I'm using asterisk as softphone for a certain application. It uses chan_capi for PSDN connection and chan_oss and the manager as user interface. When calling someone, who is busy, I can hear at the speaker the busy indication, but the manager command "Status" still tells "Ringing" (chan_oss) or "Dialing" (chan_capi) (until it times out). Is chan_capi

Hi I know this gets covered fairly regularly, but I've had a search through the archives and can't find anything dealing with this specifically - apologies if I've missed it though. I've got a TDM11B with the fxo port plugged into a standard UK BT PSTN line, loading wcfxs with OPERMODE=UK. All's working well, except if I get an incoming call through my bt line, and the

Guys, this is weird.. Today I started having some problems with calls been dropped. Im suing X100p cards (clones) and I have this setting on my zatala fle: [channels] language=sp signalling=fxs_ks usecallerid=yes cidsignalling=bell cidstart=ring hidecallerid=no callwaiting=yes usecallingpres=yes ;sendcalleridafter=1 callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes

Hello, my config : aah 2.6 (asterisk 1.2.4) , centos 4.2, 1 TDM11B (1 Fxo / 1 fxs ), 1 phone, 1 softphone I'm in France When someone from PSTN calls and hangs up before the call is answered, internal extension keeps ringing until timeout occurs. PSTN line keeps busy. Hangup detection doesn't work. I've played with different paremeters (callprogress, busydetect, busycount,