search for: bridgep

Hello I can confirm that the variable DIALEDPEERNAME contains the information that I would expect in the variable BRIDGEPEER. But I read nowhere that DIALEDPEERNAME has replaced BRIDGEPEER as of Asterisk version 13 ?! So if this is not the intention, then yes this is probably a bug and should be reported. Kind regards. Jonas. On 18-09-16 19:58, Ludovic Gasc wrote: > Hi, > > You might use DIALEDPEE...

...vider-0000010b left 'simple_bridge' basic-bridge <ab233c52-249f-4370-bcdd-3eb9af7c6cfd> When the call ends in Asterisk version 1.8.32.3 I can read the variable in h-context. In Asterisk 13.11.2 this variable is always empty. How come ?? Dialplan logic : ... exten => h,n,NoOp(bridgepeer = ${BRIDGEPEER}) ... CLI on Asterisk 13.11.2 : -- Executing [h at calling:15] NoOp("SIP/mysippeer-00004c80", "bridgepeer = SIP/myprovider-00004c83") in new stack CLI on Asterisk 13.11.2 : VERBOSE[23420][C-00000051] pbx.c: Executing [h at calling:15] NoOp("SIP/mys...

I'm wanting to capture the zap channel that a sip channel has connected to. I came across the ${BRIDGEPEER} variable documented on the wiki, and if I show channel SIP/<channel> when a call is connected I can see BRIDGEPEER as one of the channel variables. However ${BRIDGEPEER} is not set when I want it: I run a macro when the call has been connected. Does anyone have a hint on how to achie...

...st,,g) exten => 0,n,Set(DYNAMIC_FEATURES=) exten => 0,n,Goto(dynamic-nway,${CONFNO},1) exten => i,1,Goto(dynamic-nway,${CONFNO},1) [dynamic-nway-dest] exten => _XXX,1,Dial(SIP/${EXTEN}) [macro-nway-start] exten => s,1,Set(CONFNO=${FindFreeConf()}) ;exten => s,n,ChannelRedirect(${BRIDGEPEER},dynamic-nway,${CONFNO},1) exten => s,n,ChannelRedirect(${BRIDGEPEER},dynamic-nway,${CONFNO},1) exten => s,n,Read(DEST,dial,,i) exten => s,n,Set(DYNAMIC_FEATURES=nway-inv#nway-noinv) exten => s,n,Dial(Local/${DEST}@dynamic-nway-dest,,g) exten => s,n,Set(DYNAMIC_FEATURES=) exten =&...

...al times but I couldn't find any answer. Sorry for asking. I want from dialplan, to transfer a callee to a context-extension-priority that would play a given fax file to callee (callee is supposed to be a fax number). I can get caller's channel id (with built-in CHANNEL variable). I found BRIDGEPEER but its value remains unset (see bellow) even inside connect2fax routine (in which I would like to re-direct both channels : incoming channel to let caller hear "you successfully sent a fax" and outgoing channel to get fax content) : context mylocal { _2X. => {...

thanks for your reply but i think ${BRIDGEPEER} will work only when both channels are connected. i want to get channel-id before dialing so that i can dial using that channel id. > ${BRIDGEPEER} is probably a good way to do what you want.. if Channel > A calls Channel B, and you want Channel A to "get" the channelID of &g...

Hi How to set a threeway conference in asterisk only for VOIP (I am using only SIP channel). Thanks Nikhil

...EST}@nway-conf-dest,,g) exten =>0,n,Set(DYNAMIC_FEATURES=) exten =>0,n,Goto(nway-conf,${CONFNO},1) exten =>i,1,Goto(nway-conf,${CONFNO},1) [nway-conf-dest] exten =>_XXX,1,Dial(SIP/${EXTEN}) [macro-nway-conf-start] exten =>s,1,Set(CONFNO=300) exten =>s,n,ChannelRedirect(${BRIDGEPEER},nway-conf,${CONFNO},1) exten =>s,n,Read(DEST,dial,,i) exten =>s,n,Set(DYNAMIC_FEATURES=nway-conf-inv#nway-conf-noinv) exten =>s,n,Dial(local/${DEST}@nway-conf-dest,,g) exten =>s,n,Set(DYNAMIC_FEATURES=) exten =>s,n,Goto(nway-conf,${CONFNO},1) [macro-nway-conf-ok] exten =...

.... No I put asterisk in the middle. Asterisk receives the call and dial to a SIP/peer. How the pbx installed support 2 extensions to one fxs... How can I figure out in asterisk which extension was dialed before the call came to asterisk? Does asterisk receive this information in some variable? ${BRIDGEPEER} ${CALLERID(dndi)} ${BLINDTRANSFER} ${BLINDTRANSFER} I tried the above variables without success. Thanks in advance. Fernando Lujan

I am trying to use ImportVar to get some information out of a SIP/ZAP channel. I cannot seem to find an example of the syntax, or what variables I can access. Basically, I would like to output which person is being called. i.e: SIP/25 calls SIP/21. 25 executes a macro, and the result is SIP/21. The info that I want is stored in the channel's "Direct Bridge" variable. I have

...on. so the '*userfield' *field will remained Blank. is there any way to suspend CDR write INTO DB untill the end of the whole dialplan priorities? *exten => research,1,Answer()* *exten => research,n,Wait(3)* *exten => research,n,Queue(research,tkc)* *exten => research,n,Noop(${BRIDGEPEER:4:4})* *exten => research,n,SayNumber(${BRIDGEPEER:4:4})* *exten => research,n,read(dtmf,,1,,,10)* *exten => research,n,Set(CDR(userfield)=${**dtmf}**)* *exten => research,n,Hangup* -- Regards, Ali R. Taleghani 0936 322 4069 -------------- next part -------------- An HTML attachme...

...EATURES=cob-join#cob-nojoin) exten => *,n,Dial(Local/${DEST}@callout,,g) exten => *,n,Set(DYNAMIC_FEATURES=) exten => *,n,Goto(cob-meetme,${COB_CONFNO},1) [macro-cob-join] exten => s,1,Set(CDR(accountcode)=${MY_ACCOUNTCODE}) exten => s,n,ChannelRedirect(${BRIDGEPEER},cob-meetme,${COB_CONFNO},2) [macro-cob-nojoin] exten => s,1,Set(CDR(accountcode)=${MY_ACCOUNTCODE}) exten => s,n,SoftHangup(${BRIDGEPEER}) I have these in features.conf and enabled in the dialplan: cob-join => *33,self/both,Macro,cob-join cob-nojoin => *...

Hi: I want to make parking calls easier for my hard-working users. Is there a way to make the Polycom call park feature work with Asterisk? In case it just works out of the box, I haven't tried it yet; but the "call park" feature isn't enabled on the Polycom phones by default. -Stephen-

...me: 0h3m24s Bridge ID: 0cbdb7d7-81ed-4c5f-896f-cea37599b148 -- PBX -- Context: outgoing-kamailio Extension:pjsi Priority: 1 Call Group: 0 Pickup Group: 0 Application: AppDial Data: (Outgoing Line) Call Identifer: [C-00000000] Variables: BRIDGEPEER=PJSIP/7001-00000000 DIALEDPEERNUMBER=7000 CDR Variables: level 1: calledsubaddr= level 1: callingsubaddr= level 1: dnid= level 1: clid="" <700 level 1: src=7000 level 1: dcontext=outgoin level 1: channel=PJSIP/7 level 1: lastapp=AppDial level 1: lastdata=(Outgoi level 1: start=139...

...@nway-conf-dest,,g) exten => 0,n,Set(DYNAMIC_FEATURES=) exten => 0,n,Goto(nway-conf,${CONFNO},1) exten => i,1,Goto(nway-conf,${CONFNO},1) [nway-conf-dest] exten => _.,1,Dial(SIP/${EXTEN}) [macro-nway-conf-start] exten => s,1,Set(CONFNO=300) exten => s,n,ChannelRedirect(${BRIDGEPEER},nway-conf,${CONFNO},1) exten => s,n,Read(DEST,dial,,i) exten => s,n,Set(DYNAMIC_FEATURES=nway-conf-inv#nway-conf-noinv) exten => s,n,Dial(Local/${DEST}@nway-conf-dest,,g) exten => s,n,Set(DYNAMIC_FEATURES=) exten => s,n,Goto(nway-conf,${CONFNO},1) [macro-nway-conf-ok] ext...

Hi, my question is how can i get channel-id of a user or peer. I tried using ChanIsAvail(username). this works correctly when user and asterisk are on Local LAN. But my asterisk server is on public ip and users are behind nat, and so this method says unknow host when used on public asterisk server. I also tried built-in variable ${CHANNEL}, but this returns the channel-id of the calling channel.

Hi, I have a question... With the variable ${CHANNEL} I can get the channel whose made the call, or the caller. How can I get the channel of the called side? Veja quais s?o os assuntos do momento no Yahoo! +Buscados http://br.maisbuscados.yahoo.com

...mic context=from-sip ****************************extensions.conf************************** [from-sip] include => testkey1 include => keycommand exten => 1,1,Dial(sip/1) exten => 1,2,Hangup() exten => 2,1,Dial(sip/2) exten => 2,2,Hangup() [keycommand] exten => s,1,SoftHangup(${BRIDGEPEER}) *********************************************************************** when I use sip extensions 1 call to sip extensions 2, In the process they calling, i press *3 keys. But there is nothing happened, the call still through, and the system does not play the voice file. I don't know whe...

Hello everyone Is there a possibility to catch an outbound callleg ID for the follovong scenario: some carrier -----> ------(asterisk1) --->-----asterisk2 ? I can get inbound callid for asterisk1 with a ${SIPCALLID} in extensions.conf or to look it up in cdrs field (are the same). But how about outbound? I have all calls just forwarded through asterisk1, not answered and for every call I

Is there a general recipe to avoid fraudulent calls under the following conditions? A receptionist transfers calls as a callee (customers are calling) and as a caller (boss asks to call and then transfer to him), i.e. the Dial cmd for the internal context contains "Tt". Then an outside call would operate as a Local channel in an internal context after the first transfer. If the