Displaying 6 results from an estimated 6 matches for "bri_t".
Did you mean:
britt
2008 Dec 30
5
Xorcom BRI state NOTOPEN
...never seen during my previous
installations.
I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux
and asterisk 1.4.22. Everything works fine but after some time zap
channels disappear in asterisk.
root at pbx1:~# cat /proc/zaptel/*
Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN
1 XPP_BRI_TE/00/00/0 Clear NOTOPEN
2 XPP_BRI_TE/00/00/1 Clear NOTOPEN
3 XPP_BRI_TE/00/00/2 HDLCFCS (In use) NOTOPEN
Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: BRI_TE" AMI/CCS NOTOPEN
4 XPP_BRI_TE/00/01/0 Clear NOTOPEN
5 XPP_BRI_TE/00/01/1 Clear...
2007 Jun 25
1
Xorcom Bri 4 Port USB
...ny pointers you can give would be greatly appreciated.
We are running Fedora 7.
Kernel "Linux 2.6.21-1.3194.fc7 #1 SMP i686 i686 i386 GNU/Linux" (Standard Kernel with install)
Device has jumpers all set to TE mode.
/etc/init.d/zaptel.conf
# Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE"
span=1,1,1,ccs,ami
# termtype: te
bchan=1-2
dchan=3
# Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE"
span=2,2,1,ccs,ami
# termtype: te
bchan=4-5
dchan=6
# Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE"
span=3,3,1,ccs,ami
# termtype: te
bchan=7-8
dchan=9
# Span 4:...
2007 Jun 27
1
Zap dialling issues
...or internal users to transfer callers to
exten => _5XX,1,MeetMe(${EXTEN},cMd)
exten => _5XX,n,Hangup
exten => 6000,1,Dial(zap/0418608609)
/etc/asterisk/zapata.conf
[channels]
;echocancel = yes
;transfer = yes
callgroup=1
pickupgroup=1
; Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE"
group=0,11
context=zapin
switchtype = euroisdn
signalling = bri_cpe
channel => 1-2
; Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE"
group=0,12
context=zapin
switchtype = euroisdn
signalling = bri_cpe
channel => 4-5
; Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI...
2007 Jul 12
0
No subject
...init_card_3_30'
Dec 30 21:42:09 wedekindpbx1 init_card_3_30: XBUS-01/UNIT-0: init_xhfc(0)
Dec 30 21:42:15 wedekindpbx1 init_card_3_30: XBUS-01/UNIT-0: Ending '/usr/s=
hare/zaptel/init_card_3_30'
Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955210] INFO-xpp: XBUS-01/XPD-0=
0: Initialized: BRI_TE
Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955220] INFO-xpp: XBUS-01/XPD-0=
1: Initialized: BRI_TE
Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955227] INFO-xpp: XBUS-01/XPD-0=
2: Initialized: BRI_TE
Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955233] INFO-xpp: XBUS-01/XPD-0=
3: Initialized: BRI_T...
2011 Jun 01
10
busy hangup HDLC Bad FCS (8) on Primary D-channel
...4) seems the only one that seem to work
anybody has a clue?
much appreciated
some gory details below,
HARDWARE:
D201GLY2 motherboard
usb:001/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware
DAHDI CONFIG:
dahdi-channels.conf
; Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
; Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: BRI_TE"
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5...
2009 Nov 30
1
DAHDI - BRI - Astribank
...d by /usr/sbin/dahdi_genconf on Mon Nov 30 18:37:14 2009
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" (MASTER) AMI/CCS
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: BRI_TE" AMI/CCS
span=2,2,0,ccs,ami
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5
# Global data
loadzone = it
defaultzone = it
**...