search for: boxbe

Am I reading the data below incorrectly, or does it appear that even though I have the directive canreinvite=no set for the two asterisk boxes, they are trying to do a reinvite (which fails) anyway? Is this expected behaviour in this situation? If so, how can I prevent this? ---- Lots of output ---- Using CVS Head from 2005-08-28, I have two asterisk boxen, one (box A) has a sip ua (2608)

Hey guys sorry for this newbie type post but I'm not getting it really. I see other posts that r asking a simliar question but I'm not understanding. Currently I have working boxA and BoxC. SSH is the only thing accepted. So currenty I'm backing up files on boxC with "rsync -e ssh user@publicIPforB:/home/backup/back_me_up /home/backup". Now I have added boxB in front of

We have a load balancer sending requests to one of X boxes and one of N mongrel processes on that box. Since each mongrel processes is multi-threaded but it has a mutex around the section that calls rails, we end up with several requests queued up waiting when they could have gone to another box with a free process. For example, boxA, and boxB. boxA has mongrels 1 through 10 boxB has

...est_10d ??? test_20d 0 directories, 2 files [root at chenqiang]# ll total 8 -rw-r--r-- 1 root root 4 5? 20 19:14 test_10d -rw-r--r-- 1 root root 4 5? 10 19:15 test_20d So, I want to delete file test_20d, keep test_10d, how to do that? thx. On 2016?05?27? 02:12, Gordon Messmer wrote: > Boxbe <https://www.boxbe.com/overview> This message is eligible for > Automatic Cleanup! (gordon.messmer at gmail.com) Add cleanup rule > <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3Dcj6TIIH2JCApBZSDfyWJ8iQEI%252BX4EXjdlT1Hn%252Bg1S2k%253D%26token%3D9azx...

...to lines starting with |d|, |D|, |v|, |q|, |Q|, |C|, |x| and |X|. If omitted or set to "|-|", no automatic clean-up is done." so, there have good idea if I only want to delete the specific files not all files in that dir? thx. On 2016?05?26? 20:54, Jonathan Billings wrote: > Boxbe <https://www.boxbe.com/overview> This message is eligible for > Automatic Cleanup! (billings at negate.org) Add cleanup rule > <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3DIHIC9p2jvtlLIfUym1h5cJ2bV47JU5xUSAS8hXJ6s5Y%253D%26token%3DQxrt0MFjvrbNQUv1X...

Hi, I have searched the archived, and see this question has come up with some frequency, but the solution by the original poster is never posted or the question is not answered completely. I have also RTFM (rsync and ssh), and I've been trying examples that I have googled. So here it is again. BoxA --internet-- BoxB (accessable only by ssh) -- BoxC I want to backup BoxC to BoxA. I want

Hi all, I use centos7 and don't want to use tmpwatch as well as crond. I have a question to use `systemd-tmpfiles-clean.service` with my custom configured file in `tmpfiles.d` to delete outdated files periodically in some log dir. I have a `tmpfiles.d` configured file in `/etc/tmpfiles.d` named `my_log.conf` in following contents. ``` #Type Path Mode UID GID Age Arg r

hello list, i need to setup an asterisk system with 5 ISDN trunks. i found C4 cards but they are very expensive. i found that if i use 5 AVM Fritz! cards it would be very cheap. i want to use 2 boxes. 3 in boxA +2 in boxB =5 isdn. and i want, this two boxs to work as a single box so that one box can share ISDN hardware from other box. this system will be serving a call center. currenly we are

Hello All, This is probably another one of those completely silly questions that I'm going to hit myself later on, but I have the simplest issue right now but I can't figure out why it's happening: I have a trunk from one * box (box a) to another * box (box b) the call comes in from box a with an extension 2222 which acc. to the peer config in sip.conf is set to use context

The setup... Transport is via SSH. BoxA : Ubuntu 8.10 BoxB : Mac OS X 10.4.11 If I use rsync v2 to transfer data from BoxA to BoxB everything works fine. However, if I use rsync v3 to transfer the data, the following error is reported : rsync: mkstemp "/path/to/somefile/file.pm.JKQczN" failed: No such file or directory (2) If at all possible,

I have a simple requirement/test I'm trying to perform, but having difficulty. I have a system with 2 interfaces, BoxA: eth0? 172.26.50.102 eth1? 192.101.77.62 My goal is to have a tcp port built on BoxA such that hosts on the 192.101.77.0/24 network can reach a port on a different box on the 172.26.0.0/16 network. The target system is 172.26.10.120?? tcp/22 The port I wish to build is

Or perhaps how to configure and refer to two parallel IAX trunks with different codecs? I have a situation where I'm using G.729A as my IAX trunking codec. Now I need to push some short duration, low bitrate modem traffic over the link (a credit card terminal). Obviously the modem audio isn't going to survive the G.729 codec process intact, so for the times the device is used I'd like

I have been looking around some and I can't seem to find anything which will answer my question. If I have two Asterisk boxes in different locations which are linked to each other over the internet, can I configure the boxes to use each other's lines as local? In other words, let's say Site A has Phone1 for a 1FB line going into it on an FXO port. Site B has Phone2 for a 1FB line

Quick and dirty too hungover to think/search... ;) Sorry list AsteriskBoxA -> SBC/PSTN voodoo -> world wide Interweb -> AsteriskBoxB Account on BoxA UsernameJohn<12125551212> Account on BoxB UsernameJohn<102> They're both the same users, had to do some funky trunking (managed firewall provider is playing not in my backyard games)... So anyway, I need to take specific

Hi, I am just migrating to Centos from fedora core 3. I have 3 boxes involved here: Box A --Fedora 3 (doing the dns, http, sendmail serving duties) Box B --CentOS Box C --CentOS I used to run root passwordless ssh both ways from boxes A and B mainly set up to keep the 2 boxes in sync w/rsync ... these 2 boxes normally ran one being the slave and the other being the master...the master did all

Hi list. We have 2 NAS-Devices, each mounted on the same (virtual) box. For our backup we use bacula. Bacula ist writing its files to the first NAS (192.168.1.9). These are big files, up to 160 GB. For implementing a good backup strategy we decided to mirror (sync) another NAS-Device (192.168.1.8) to have redundant bacula backups. If sync is done the Device will be kept at another location too.

hi guys I'm trying a typical, I'd presume, setup: two libvirt hosts with one lxc guest each. boxA: $  ovs-vsctl show 1a6a2e4f-11f3-48df-becd-03b59d00a1fb     Bridge "ovsbr0"         Port nm-team             trunks: [55]             Interface nm-team         Port "vnet12"             trunks: [55]             Interface "vnet12"         Port

Hi i have to forward a call from my asterisk server on another server but my server is behind nat. How can i setup my extension.conf? Actually i have set up it as follows: exten => 0465666666,1,Dial(SIP/user@dormain) my server has a private ip 192.168.100.249 and doesn't have a public ip If i try to call SIP/user@dormain from an adsl connection (with a modem, without nat) the call is

Hi, I'm trying distributed events with Openais but don't work. I made the test with two asterisk box in the same LAN box A: 192.168.142.246 asterisk 1.6.2.13 BoxB: 192.168.142.248 asterisk 1.8.0 openais.conf: # Please read the openais.conf.5 manual page totem { version: 2 secauth: off threads: 0 consensus: 4800 interface { ringnumber: 0 bindnetaddr: 192.168.142.0 mcastaddr:

hello, i've rsync installed: rsync version 2.6.9pre3 protocol version 29 Capabilities: 64-bit files, socketpairs, hard links, symlinks, batchfiles, inplace, no IPv6, 32-bit system inums, 64-bit internal inums i'm PULLing via rsync+ssh from BoxA to BoxB, eg: root@localhost /tmp > /usr/local/rsync/bin/rsync \ --rsh=/usr/local/openssh/bin/ssh \