Displaying 20 results from an estimated 22 matches for "boxb".
Did you mean:
box
2005 Aug 31
0
canreinvite=no being ignored?
...dec Order : (ulaw)
Status : OK (16 ms)
Useragent : Sipura/SPA841-0.9.1
Reg. Contact : sip:2608@192.168.10.32:5060
Sip config for Box B on box A:
pbx3*CLI> sip show peer pbx1
* Name : boxb
Secret : <Not set>
MD5Secret : <Not set>
Context : inter-system-inbound-main
Language :
AMA flags : Unknown
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox :
VM Extension : asterisk
LastMsgsSent : -1...
2003 May 14
2
rsync + ssh or what?
...see other posts that r asking a simliar question but I'm not understanding.
Currently I have working boxA and BoxC. SSH is the only thing accepted. So
currenty I'm backing up files on boxC with "rsync -e ssh
user@publicIPforB:/home/backup/back_me_up /home/backup". Now I have added
boxB in front of boxC.
boxA(publicIPforA)
<------>Internet<------>(publicIPforB)boxB(privateB)<--->(privateC)boxC
Now obviously as u guys have been discussing I think, I need to back up the
files from boxC still to A. I RTFM and am still confused. I want to be able
to SSH to port 22...
2007 Oct 27
7
load balancers and mongrel
...boxes and one of
N mongrel processes on that box.
Since each mongrel processes is multi-threaded but it has a mutex
around the section that calls rails, we end up with several requests
queued up waiting when they could have gone to another box with a
free process.
For example, boxA, and boxB.
boxA has mongrels 1 through 10
boxB has mongrels 11 through 20
Load balancer sends a request to boxA mongrel 5.
Load balancer sends a request to boxB mongrel 12.
Load balancer sends a request to boxA mongrel 5 again.
It has to wait for the 1st request still running on boxA mongrel 5.
How can we...
2016 May 30
0
centos7 tmpfiles.d deleted outdate files
...est_10d
??? test_20d
0 directories, 2 files
[root at chenqiang]# ll
total 8
-rw-r--r-- 1 root root 4 5? 20 19:14 test_10d
-rw-r--r-- 1 root root 4 5? 10 19:15 test_20d
So, I want to delete file test_20d, keep test_10d, how to do that? thx.
On 2016?05?27? 02:12, Gordon Messmer wrote:
> Boxbe <https://www.boxbe.com/overview> This message is eligible for
> Automatic Cleanup! (gordon.messmer at gmail.com) Add cleanup rule
> <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3Dcj6TIIH2JCApBZSDfyWJ8iQEI%252BX4EXjdlT1Hn%252Bg1S2k%253D%26token%3D9az...
2016 May 30
0
centos7 tmpfiles.d deleted outdate files
...to lines starting with |d|, |D|, |v|, |q|,
|Q|, |C|, |x| and |X|. If omitted or set to "|-|", no automatic clean-up
is done."
so, there have good idea if I only want to delete the specific files not
all files in that dir? thx.
On 2016?05?26? 20:54, Jonathan Billings wrote:
> Boxbe <https://www.boxbe.com/overview> This message is eligible for
> Automatic Cleanup! (billings at negate.org) Add cleanup rule
> <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3DIHIC9p2jvtlLIfUym1h5cJ2bV47JU5xUSAS8hXJ6s5Y%253D%26token%3DQxrt0MFjvrbNQUv1...
2005 May 15
3
rsync via tunnel - 3 boxes separated by internet
...e archived, and see this question has come up with
some frequency, but the solution by the original poster is never posted
or the question is not answered completely. I have also RTFM (rsync and
ssh), and I've been trying examples that I have googled.
So here it is again.
BoxA --internet-- BoxB (accessable only by ssh) -- BoxC
I want to backup BoxC to BoxA. I want the process to originate on BoxA,
That is I want BoxA to be the backup server, the files are stored on
BoxA, and the process of backing up is lauched on BoxA.
I have successfully done it like:
BoxA#: ssh -N -L 873:IP_BoxC:873...
2016 May 25
4
centos7 tmpfiles.d deleted outdate files
Hi all,
I use centos7 and don't want to use tmpwatch as well as crond.
I have a question to use `systemd-tmpfiles-clean.service` with my custom
configured file in `tmpfiles.d` to delete outdated files periodically in
some log dir.
I have a `tmpfiles.d` configured file in `/etc/tmpfiles.d` named
`my_log.conf` in following contents.
```
#Type Path Mode UID GID Age Arg
r
2005 Sep 13
1
2 box single Asterisk
hello list,
i need to setup an asterisk system with 5 ISDN trunks. i found C4 cards but
they are very expensive. i found that if i use 5 AVM Fritz! cards it would
be very cheap. i want to use 2 boxes. 3 in boxA +2 in boxB =5 isdn.
and i want, this two boxs to work as a single box so that one box can share
ISDN hardware from other box. this system will be serving a call center.
currenly we are using a panasonic PBX system but it is driving us crazy.
we want to keep the existing pbx setup and add asterisk with it t...
2011 May 19
1
v1.8.4: Extension Not found in Context?
...ith an extension 2222 which acc. to the peer
config in sip.conf is set to use context 'Test'
In extensions.conf,context 'Test' is as follows:
[Test]
exten => 2222,1,Answer()
same => n,Wait(2)
same => n,Hangup
on the CLI, I can verify that by 'dialplan show Test'
boxb*CLI> dialplan show Test
[ Context 'Test' created by 'pbx_config' ]
'2222' => 1. Answer()
[pbx_config]
2. Wait(2)
[pbx_config]
3. Hangup()
[pbx_config]
-= 1 extension (3 priorities) in 1 context. =-
But when the call...
2010 Mar 07
1
mkstemp error (only a problem with newer rsync versions)
The setup...
Transport is via SSH.
BoxA : Ubuntu 8.10
BoxB : Mac OS X 10.4.11
If I use rsync v2 to transfer data from BoxA to BoxB everything works fine. However, if I use rsync v3 to transfer the data, the following error is reported :
rsync: mkstemp "/path/to/somefile/file.pm.JKQczN" failed: No such file or directory (2)
If at all possible,...
2012 Dec 04
1
iptables port forwarding
.../ip_forward
1
boxA#
boxA can get to the target system:
boxA# telnet 172.26.10.120 22
Trying 172.26.10.120...
Connected to 172.26.10.120.
Escape character is '^]'.
SSH-2.0-OpenSSH_4.6
Protocol mismatch.
Connection closed by foreign host.
boxA#
When I try to connect from my other system, boxB, 192.101.77.76, it never connects to the target port:
boxB# telnet 192.101.77.62 12321
Trying 192.101.77.62...
^C
boxB#
However, I can connect to boxA from boxB on it's tcp/22 port, so I know I have connectivity:
boxB# telnet 192.101.77.62 22
Trying 192.101.77.62...
Connected to 192.101.77...
2004 Aug 19
6
How to run different codecs between the same endpoints on an IAX trunk?
Or perhaps how to configure and refer to two parallel IAX trunks with
different codecs?
I have a situation where I'm using G.729A as my IAX trunking codec. Now I
need to push some short duration, low bitrate modem traffic over the link (a
credit card terminal). Obviously the modem audio isn't going to survive the
G.729 codec process intact, so for the times the device is used I'd like
2006 Jun 04
1
Campusing two Asterisk boxes?
I have been looking around some and I can't seem to find anything which will
answer my question. If I have two Asterisk boxes in different locations which
are linked to each other over the internet, can I configure the boxes to use
each other's lines as local?
In other words, let's say Site A has Phone1
for a 1FB line going into it on an FXO port. Site B has Phone2 for a 1FB
line
2007 Dec 21
0
Incoming CID change
Quick and dirty too hungover to think/search... ;) Sorry list
AsteriskBoxA -> SBC/PSTN voodoo -> world wide Interweb -> AsteriskBoxB
Account on BoxA UsernameJohn<12125551212>
Account on BoxB UsernameJohn<102>
They're both the same users, had to do some funky trunking (managed
firewall provider is playing not in my backyard games)...
So anyway, I need to take specific calls from BoxA with the CID of
UsernameJoh...
2005 May 07
3
passwordless ssh
...ppened where the master couldn't
do it anymore, then the slave becomes master.
I have tried and tried the following
#ssh-keygen -t dsa (and rsa using authorized_keys(2) or both
depending...)
when it asks for passphrase...just enter and enter
# scp /root/.ssh/id_dsa.pub boxA:/root/.ssh/
# ssh boxB
#<password>
boxbshell # cat /root/.ssh/id_dsa.pub >>/root/.ssh/authorized_key or
key2 or both.
# exit
boxashell # ssh boxb
<password> will NOT let me do passwordless
now then I have gotten it to work by using the
following /root/.ssh/.config :
Host remotehost
User remoteuser
Co...
2011 Dec 07
3
sync prob with big files
Hi list.
We have 2 NAS-Devices, each mounted on the same (virtual) box. For our
backup we use bacula. Bacula ist writing its files to the first NAS
(192.168.1.9). These are big files, up to 160 GB.
For implementing a good backup strategy we decided to mirror (sync)
another NAS-Device (192.168.1.8) to have redundant bacula backups. If
sync is done the Device will be kept at another location too.
2019 Jan 09
0
openVswitch
... trunks: [55]
Interface nm-team
Port "vnet12"
trunks: [55]
Interface "vnet12"
Port "ovsbr0"
Interface "ovsbr0"
type: internal
ovs_version: "2.0.0"
boxB:
$ ovs-vsctl show
05ffa96c-a961-41e7-9f8a-74dbe214153a
Bridge "ovsbr0"
Port "vnet41"
trunks: [55]
Interface "vnet41"
Port nm-team
trunks: [55]
Interface nm-team
Port "ovsbr0"...
2006 Nov 11
1
sip forward behind a nat
Hi
i have to forward a call from my asterisk server on another server but
my server is behind nat.
How can i setup my extension.conf?
Actually i have set up it as follows:
exten => 0465666666,1,Dial(SIP/user@dormain)
my server has a private ip 192.168.100.249 and doesn't have a public ip
If i try to call SIP/user@dormain from an adsl connection (with a
modem, without nat) the call is
2010 Nov 05
1
res_ais Error
Hi,
I'm trying distributed events with Openais but don't work.
I made the test with two asterisk box in the same LAN
box A: 192.168.142.246 asterisk 1.6.2.13
BoxB: 192.168.142.248 asterisk 1.8.0
openais.conf:
# Please read the openais.conf.5 manual page
totem {
version: 2
secauth: off
threads: 0
consensus: 4800
interface {
ringnumber: 0
bindnetaddr: 192.168.142.0
mcastaddr: 226.94.1.1
mcastport: 5405
}
}
logging {
to_stderr: yes
debug: on
timestamp: on
t...
2006 Nov 06
1
rsync'd files&dirs saved as user:group = "unknown":"unknown", NOT original ownership
hello,
i've rsync installed:
rsync version 2.6.9pre3 protocol version 29
Capabilities: 64-bit files, socketpairs, hard links, symlinks, batchfiles,
inplace, no IPv6, 32-bit system inums, 64-bit internal inums
i'm PULLing via rsync+ssh from BoxA to BoxB, eg:
root@localhost /tmp > /usr/local/rsync/bin/rsync \
--rsh=/usr/local/openssh/bin/ssh \
--rsync-path=/usr/local/rsync/bin/rsync \
--verbose --stats \
--archive \
--super --owner --group --numeric-ids \
--recursive \
--no-implied-dirs \
--compress-level=0 \
root...