search for: bmc

I have installed BMC Remedy User Version 7.0.01 Patch 002 on ubuntu 8.10 but i have two errors: "ARERR 1900" and on the on the left "rendering is current disable". The wine version is 1.1.13 but with other version is the same. Settings wine or other? Can you help me? Thanks

...d, Jun 27, 2018 at 05:14:06PM -0400, mark wrote: > >> I do see one option of "defgw macaddr" - is that supposed to be a MAC >> external to the server, or can I use the MAC of eth1 (or whatever the >> stupid, unrememberable name is)? > > As mentioned earlier, the BMC is a different MAC from any interface > you might see from the OS side. Think of it as a separate computer that > shares a physical network port (assuming it doesnt have a dedicated port). > Imagine what would happen if you put two devices on the network with > the same MAC. You don&...

Hello all, Just wondering if I can breathe some life back into this thread? I am attempting to run BMC remedy with WINE on Ubuntu as described in the subject. After using winetricks I got a little further.... After adding msxml3 && msxml4 to the libraries (native, builtin) for WINE I got much further........ I can now run BMC remedy client on Ubuntu from WINE and connect to the server. I...

...eudo MAC address is from: ################################################################################ Planar Ether 1 MAC Address: E4:1F:13:77:16:5F ============> This is shown in ifconfig eth0 Planar Ether 2 MAC Address: E4:1F:13:77:16:60 ============> This is shown in ifconfig eth1 BMC MAC Address: E4:1F:13:77:16:61 ======> This is the MAC address my SW is showing on the SW port connected to my eth0 Slot 1 MAC Address: 00:15:17:EB:AE:A4 ===========> This is shown in ifconfig eth2 ######################################################## I got some pointers over web on how...

Hi all, I am implementing two node cluster , but the hardware they given me contains only the Base Board Management controller (BMC) . Also I HEARD SOME BMC wont support power fencing, how can i check my There is no management port like HP ILO or Dell DRAC for cluster fencing . This hardware belongs to the vendor HCL. For BMC Configuration they are providing the exe setup file for windows to configure IPMI ip,usernmae and pas...

...> > get isn't a recognized subcommand under lan in the ipmitool I have > installed. > >> Do I set the MAC address for the lan to NIC 2? Anyone have a clue - I >> do *not* want martians on the real network. > > This will be very dependent on your motherboard and its BMC capabilities. > Some can do IPMI on specific ports and not others. On the Intel S2600 > series that I use they can use port 1, 2, and a dedicated RMM port, but > not ports 3 and 4. You'll need to check your mobo suppport docs to see if > it can even handle IPMI on the second port....

...extremely limited access.? For the most part, their admins haverefused to use any maintenance connectivity to servers other thanthe primary serial ports. There is a concern about system security primarily driven by recent information searches performed by end user admins and included below. IPMI/BMC Security Issues ------------------------ https://en.wikipedia.org/wiki/Intelligent_Platform_Management_Interface http://www.google.com?? Search:? IPMI "Security Holes" -- Hits: 14,500 http://www.google.com?? Search:? IPMI BMC "Security Holes" -- Hits: 4950 BIOS Security Issues...

...skanalytics.com> > > On Tue, Jun 26, 2018 at 4:10 PM, mark <m.roth at 5-cent.us> wrote: >> So you're saying I should set the MAC address for the lan channel 1 to >> the MAC address of the second NIC? > > No, you don't do anything to the MAC addresses on the BMC/IPMI. They > already have their own preset values. You decide which port you want to > use for IPMI from the ones it supports and set it up with various commands > (or use the BIOS/UEFI). The gist of what you are doing is just > setting up an > IP address on an embedded computer. It...

The man page isn't helping, nor have I been able to find examples that work. For example, the man page claims I can do ipmitool lan get active, and I try, and it says, "invaling lan command, get". Do I set the MAC address for the lan to NIC 2? Anyone have a clue - I do *not* want martians on the real network. mark

...of the > IPMI to be the host OS side of the NIC. You can't do that... in a lot > of systems I've seen, the IPMI side of the NIC can't even talk to the > host OS on the network. >From previous emails, I gather that mark can't find the way to set which interface the IPMI BMC uses, so he's setting the BMC's IP settings to use one of the NICs as a gateway. This is not how you make that setting (it won't work) but I can see where he's coming from. In my experience, it's either hard-wired to a particular interface. This should be documented, otherwise...

...a concern about system security primarily driven by recent > information searches performed by end user admins and included > below. [...snip...] > > My initial recommendation was to use a totally separate network for > any service processors within the servers that implement IPMI/BMC > capabilities. This has been standard practice in most systems I have > worked on in the past, and has allowed certification with > essentially no problems. The BIOS concern seems to be another issue > to be addressed separately. +1 to network separation for OOB management. I assu...

...lan command, get". > get isn't a recognized subcommand under lan in the ipmitool I have installed. > Do I set the MAC address for the lan to NIC 2? Anyone have a clue - I do > *not* want martians on the real network. > This will be very dependent on your motherboard and its BMC capabilities. Some can do IPMI on specific ports and not others. On the Intel S2600 series that I use they can use port 1, 2, and a dedicated RMM port, but not ports 3 and 4. You'll need to check your mobo suppport docs to see if it can even handle IPMI on the second port. If so, you just conf...

------- =_aaaaaaaaaa0 Content-Type: text/plain; charset="us-ascii" Content-ID: <14008.870179829.1@erehwon.bmc.com> See attached. Red Hat Linux package mh-6.8.3-13.i386.rpm installs the inc and msgchk programs as follows: -rwsr-sr-x- root mail 72628 Oct 17 16:57 /usr/bin/mh/inc -rwsr-xr-x- root root 52536 Oct 17 16:57 /usr/bin/mh/msgchk Hal ------- =_aaaaaaaaaa0 Content-Ty...

Are there any easy to use snmp(mainly temperature monitoring) tools around for Centos -4? This is on a Dell sc420 server. -- Computer House Calls, Networks, Security, Web Design: http://www.emmanuelcomputerconsulting.com What businesses are in Brunswick, Maryland? Check Brunswick First! http://www.checkbrunswickfirst.com My "Foundation" verse: Isa 54:17 No weapon that is formed

..._si.ko': -1 No such device and in the log Mar 10 11:24:36 south kernel: IPMI System Interface driver. Mar 10 11:24:36 south kernel: ipmi_si: Trying hardcoded-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 Mar 10 11:26:28 south kernel: ipmi_si: There appears to be no BMC at this location Mar 10 11:26:28 south kernel: ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 Mar 10 11:28:20 south kernel: ipmi_si: There appears to be no BMC at this location Mar 10 11:30:12 south kernel: ipmi_si: Unable to find any System Inter...

Hi, I got the following comment from the reviewer of a paper (describing an algorithm implemented in R) that I submitted to BMC Bioinformatics: "Finally, which useful for exploratory work and some prototyping, neither R nor S-Plus are appropriate environments for deploying user applications that would receive much use." I can certainly respond by pointing out that CRAN contains more than 2000 packages and Bio...

On Thu, Jul 02, 2015 at 12:30:47PM -0400, Paul Heinlein wrote: > If your admins are comfortable with serial consoles, a concentrator > like those available from Digi or WTI can offer fairly robust access > controls; they can also be set to honor SSH keys rather than > passwords, which may help increase security. I've used those for devices that were fairly dumb, but for servers

Michael C. Tiernan wrote: > ipmitool -I open lan get *NUMBER* > Description: CentOS Linux release 7.5.1804 (Core) Release: 7.5.1804 ipmitool -I open lan get 1 Invalid LAN command: get I'm saying that the get command with lan DOES NOT WORK. ipmitool doesn't understand it.... <SNIP> mark

Hi Everyone, I have a dell 1750 server with ERA/O card running on FreeBSD 7.0-STABLE According to Dell, the ERA card supports ipmi 1.0: http://linux.dell.com/ipmi.shtml But so far no luck with freebsd :/ [root@home /usr/src/sys/i386/conf]# ipmitool -I open channel info 1 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

Greetings all, I am looking for a solution to use IPMI (BMC) in with LibVirt (Virt-Manager). Actually there is a Customer behind this request as well. Trying to be short: We are looking for a Solution in OpenStack Environment. Customer wants to have the entire environment running in Virt-Manager (probably for a P.O.C or tests purposes). So here is what he...