search for: bge2

Hi, Can you tell why my vnic built on top of an aggregation of 2 NICs of 1 Gbit/s doesn''t report a speed of 2 GBit/s ? [root at nazgul /]# dladm show-dev bge0 link: up speed: 1000Mb duplex: full bge1 link: down speed: 0Mb duplex: unknown bge2 link: down speed: 0Mb duplex: unknown bge3 link: down speed: 0Mb duplex: unknown --- Aggregation creation: bge1 & bge2 aggregated, BW = 2 Gbps --- [root at nazgul /]# dladm create-aggr -d bge1 -d bge2 1 [root at nazgul /]# dladm show-link bge0...

...00-0xf6baffff irq 36 at device 0.1 on pci3 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: <MII bus> on bge1 bge1: Ethernet address: 2c:76:8a:54:08:15 bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6b90000-0xf6b9ffff, 0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 at device 0.2 on pci3 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: <MII bus> on bge2...

I'm experiencing similar problems with a 3C996-T under 4.8-REL. In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The

...on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it appears as bge2, how can this be corrected? thanks, danny

...,IPv4> mtu 1500 index 2 inet 10.1.1.16 netmask ffffff00 broadcast 10.1.1.255 ether 0:14:5e:23:4f:fd bge1: flags=1000943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,IPv4> mtu 1500 index 3 inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255 ether 0:14:5e:23:4f:fc bge2: flags=1000943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,IPv4> mtu 1500 index 4 inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255 ether 0:10:18:19:27:ea lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 tim at ghos...

...tch range (0xd51e0000-0xd51effff) for rid 18 of pci0:1:0:1 map[20]: type Prefetchable Memory, range 64, base 0xd51f0000, size 16, enabled pcib2: allocated prefetch range (0xd51f0000-0xd51fffff) for rid 20 of pci0:1:0:1 pcib2: matched entry for 1.0.INTB pcib2: slot 0 INTB hardwired to IRQ 38 bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd51a0000-0xd51affff,0xd51b0000-0xd51bffff,0xd51c0000-0xd51cffff irq 35 at device 0.0 on pci1 bge2: APE FW version: NCSI v1.0.80.0 bge2: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 266 to local APIC 0...

Hi, how can ip instances be used with vlans ? Is that possible ? I don''t know how to configure this, if I only have one interface (e.g. bge0), and want to assign e.g. bge1000 to a zone. Any cookbooks available ? Thanks Detlef

I opened a bug report earlier today but it doesn''t seem to have been added to the bugs database. I''m posting here in case one of the Crossbow developers might see it and confirm this behavior. Description Duplicate packets are generated whenever an aggregate is introduced into the network configuration. We''ve ruled out switch ports and physical bge interfaces as

...BA VERSION: 3.5.3 - - # define SAMBA_VERSION_STRING SAMBA_VERSION_OFFICIAL_STRING LIBREPLACE_LOCATION_CHECKS: START LIBREPLACE_LOCATION_CHECKS: END LIBREPLACE_CC_CHECKS: START LIBREPLACE_CC_CHECKS: END LIBREPLACE_BROKEN_CHECKS: START LIBREPLACE_BROKEN_CHECKS: END LIBREPLACE_NETWORK_CHECKS: START bge2 IP=xxx.xx.xx.xx NETMASK=255.255.255.0 bge1 IP= xxx.xx.xx.xx NETMASK=255.255.255.0 bge0 IP= xxx.xx.xx.xx NETMASK=255.255.255.0 lo0 IP=127.0.0.1 NETMASK=255.0.0.0 LIBREPLACE_NETWORK_CHECKS: END checking for Isilon OneFS... no Package talloc was not found in the pkg-config se...

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0