search for: beronets

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

Hi, I'm looking for an interface card for termination of Euro-ISDN2 (BRI) lines. That is ISDN lines from the telco into my Asterisk box. Any recommendations, good/bad expiriences ? At present I'm looking at cards from BeroNet and Junghanns. Cheers, John Faroese Telecom

Hi list! Do anybody has success histories about using the Beronet app_saynumber application? For those that are hearing about for the first time, it?s a piece of software that enables the use of another language in say_number commands in asterisk dialplan or AGI scripts. Link to download: http://www.beronet.com/download/app_saynumber-beta-rc1.tar.gz I?m trying to compile it in

Hi. I'm trying to get a Beronet QuadBRI card work with bristuff drivers. Though qozap module loads right, all card spans are in deactivated status. I'm quite sure my configuration is correct and using a single BRI card instead of the quadBRI the status is active and I can place and receive calls. On Beronet installation manual I read that Beronet and Junghanns cards are identical in

Hi all, i have read in the * whitepaper the following: "s: The "start" extension. A call which does not have digits associated with it (for example, a loopstart analog line) begins at the "s" extension." I think this means the s extension will be execute when the phone is picked up. But when i pick up the phone the s extension will be never executed. Whats wrong

Hi, we've purchased new Beronet Octobri card and have problems loading modules for stock Asterisk for Debian Sarge (it has bristuff patches in it). when loading qozap it says that no multibri card was found although lspci shows it... There were quite some rumours about bristuff not liking other than junghanns cards, but don't know if something happened.... Anyone recently used this

Hi, I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything seems ok, asterisk gives no error (nothing inside logs) but the 4 led on the back of the card (which is NOT connected to an ISDN line) are red and flashing....what does it mean? Is it not properly working or it means the card is not connected to any ISDN line? The card handbook says the card has red led but not their

I'm having trouble installing Beronet BN4S0 card. I have downloaded instructions from here http://www.beronet.com/download/card_installation_guide.pdf And when I download install-misdn-mqueue[1].tar.gz I untar it and execute "make" and "make install". This is the output that I get. [root@nbirma1 install-misdn-mqueue]# make install make -C app_bundle make[1]: Entering

Hi, I'm currently using a beronet quadBRI and a Digium tdm400P card on a Poweredge SC420 DELL with mandriva 2005 LE (standard installation) but this particular configuration gives me a problem: sometime the 2 cards work well toghether, sometimes it is impossible to make/receive calls. Is there anybody out there who is currently using this configuration without problems? TIA Giorgio

Hi all, I just arrived in Italy from Cebit, qhere I spoke with digium and Beronet people. They told me to try to use the mISDN stack to drive beronet and the new upcoming digium ISDN Cards. SO I searched, find http://www.beronet.com/download/card_installation_guide.pdf, and I immediately got the error: asterisk01:~ # cd /usr/src/install-misdn/ asterisk01:/usr/src/install-misdn # make install

Ciao, I have an Asterisk 1.2.9.1 box with a beronet dualBRI (install-misdn-queue) on a Debian distro. I'm experiencing problem with some Telecom Italia lines: some people cannot choose menu selections or extensions after hearing intro message. Is there anybody who knows if there is a particular parameter to set inside misdn.conf (or maybe some other configuration files) ? TIA Giorgio

Hello. Just installed the Beronet BN4S0 card. But i can't connect to my ISDN Line. misdnportinfo gives (what does ":Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib" mean?): best regards and thanks t. asterix asterisk # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001

Hi all, I have a problem with my beronet card with 2 isdn. I think drivers and Asterisk are ok but the red led on the card always blinking. The card is connected with PBX. I post some conf: [root@gateway ~]# misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. ->

Hello, I'm in the process of building an Asterisk machine and need 5 or 6 BRI-Channels. I was looking for the beroNet and Junghans cards and stumbled upon the Xorcom Astribank xBRI products. Has anybody tried out the Astribank xBRI-Channel Banks? Are they production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET octoBRI ISDN? Thanks in advance, Lars -- We don't like their

Hi all, have anybody an idea where to get adsi phones in europe ? Thanks, Thomas. ******************************************* beroNet technologies GmbH Dipl.- Ing. Thomas H?ger Potsdamer Str. 18 A 14513 Teltow FON: +49 (0) 3328 3077731 FAX: +49 (0) 3328 334779 Email: thomas.haeger@beronet.com *******************************************

Hello. I have problems to integrate an isdn phone. I don't know why but the isdn phone rings only once and than it looses its connection to his base station. I can make a call from the isdn phone to an VoIP Phone inside my network but when i pick up the phone the isdn phone also crashes. misdn.conf: [ntport1] ports=5 context=isdn-telefon msns=* extensions.conf: exten =>

Hi, I'm currently trying to get a BN4S0e (which is basically a BN4S0 with a PCIe connector) working with dahdi. The module is loading properly but the card is not detected by the module. Is support on dahdi planned for this card ? In the meantime i'm gonna use mISDN with this card. Thanks Laurent

Hi all, i made a test scenario with two windoze machines: On the first one callgen323 is running in listening mode On the second one, callgen323 strarting 25 calls to the asterisk pbx, and the asterisk calls the first windoze machine. But after the second one make a few calls (mostly after 11 - 14) asterisk crashes with the only message : Segmentation fault. Are this to many calls for oh323

Hello list, After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently detected as 2 ports instead of 4. I still load the driver as "modprobe qozap ports=12" as I've always done. But now it only sees 2 ports. Output of "lspci -vvv" ------ cut -------- 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem:

Hi all, i use the PGSQL App, and i have found out, if you use a "(" or a ")" in your query the query crashes... My sample query was : SELECT count(*) from tbltest where fldtest='xxx' can somebody fix this ...?? Regards, Thomas. ******************************************* beroNet technologies GmbH Dipl.- Ing. Thomas H?ger Potsdamer Str. 18 A 14513 Teltow FON: