search for: bergeret

Wow ! No reply... May be I must talk about X100P instead of X101P ? Is someone has yet encountered this kind of "no sound" problem when bridging two FXO lines like this (first as input, second as output) ? Any idea ? TIA. Best Regards, Francois BERGERET, France. ----- Original Message ----- From: "Francois BERGERET" <f6hqz-m@hamwlan.net> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Saturday, July 16, 2005 7:41 PM Subject: Bridging two FXO cards (X101P) prob...

Hi, Have someone there tried the TDM 2400 with 24 FXO? Have had echo problems? or any other problem ? Recommendations? Optional echo cancellation modules are necessary? TIA, Fernando

Hello all, I'm using Wildcard TE410P card. Here is a zaptel.cfg loadzone=se defaultzone=se span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,0,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,0,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 # ztcfg -vvv Zaptel Configuration ====================== SPAN 1:

I thought I read somewhere that you no longer have to do a special make command for the 2.6 kernel. Is this true, or should I still make linux26? I'm having problems getting anything zaptel to load properly. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3115 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060323/c0928576/smime.bin

Hello All, I am trying to figure out which way to go for a quad port fxo solution with a good echo can on it. My options are the sangoma remora, a mediatrix fxo, or something similar. The issue is that I would need a good EC. This would be on about a 9000 foot loop, and the lines don't function well on a spa-3000 or zaptel tdm 4 port card. Anyone have experience that drives them in a

I get the following errors when starting Asterisk. == Parsing '/etc/asterisk/zapata.conf': Found Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No such device Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Feb 19 21:14:35

The maintenance (adding RAM) took a little longer than I planned: 1) Shutdown - 1 minute 2) Open Case - 30 seconds At this point, I emember that I can''t add RAM to this box without removing the Mother Board (hinge-mounted in case) - slap forehead. 3) Remove cables, PCI NIC & MB - 2 minutes 4) Add RAM - 1 Minute 5) Get the %$#@ MB back in the case and aligned -- 15 Minutes 6)

What encryption features are available to encrypt the IAX2 traffic between two asterisk servers. I have read that there is some encryption possible but has anyone been able to encrypt the entire payload of IAX traffic between two asterisk servers. regards, John

Hi all, iam a student trying to build an asterisk pbx as a simple configuration only two extention (using Xlite)without outsite telephone line. i already follow the instruction and seem the asterisk work fine because there is no error message. when i configure SIP.conf and extention.conf i hope the phone will ring each other as an extention. but it doesn't work. i follow the instruction at

Has anyone had any success with this card? Thank you. Sandy.

Hi folks, when I start asterisk directly, I get a colored CLI. When connect to a already running asterisk with asterisk -R, it's never colored, despite I'm running both from the same console (tty). Is there a way to force asterisk -R into color mode? Regards, Stefan -- (o_ Stefan Gofferje | Linux Systems Specialist //\ Reg'd Linux User #247167 | Network Security

Hellow everyone, here's an other newby question. I've got a * configured with the card in the subject line. At times Asterisk fails to notice a disconet from the incoming line going into one of the FXO ports. Consequently it just keeps the line off-hook for ever and that causes my provider to mark the line aut of order. Is there any way to "help" Asterisk notice the disconect?

Hi, I am looking for a budget IP phone that can use preferably iLBC or GSM codecs.. Suggestions?

Is there such a thing? Or is the Digium IAXy device the closest one can come? Additionally, any idea how to get the message waiting light to work through Digium IAXy device? Thanks, Joe

Hi, folks. I want to buy FXS-SIP terminal with 4 ports (up to 250$). Do you have any recomendations and Asterisk configurations samples for such devices. Any pitfalls? Actually i realy don't know what to buy? -- ========================================================================= = Best regards, Nikolay Pavlov. <<<------------------------------------ =

Hi do you know if they have "external Box" (not internal card) for connect Analog Line and Pri/Isdn to asterisk for incomming and outgoing calls ... Thanks

Hi list, I have this problem: when someone is making a call, with asterisk and a TDM2400P connected to 8 fxo lines, the sound is good, but if three, for people are calling at the same time the sound got worse and worse. Using other voip cards the sound is much better even with all user calling at the same time. What can be, the problem? Someone else has having the same

Hi All, Can anyone recommend any test kit that you can hook up your Pri/Bri cards to without having actual ISDN in your office. For example testing an * system before it goes to a clients office. Thanks, Gavin.

Hi, I am using asterisk 1.4 with Digium TDM22B card. My system is running well except CALLERID. I have tried all options for cidsignalling, cidstart but no luck. Btw, I am living in Malaysia. From google web site, I found some one having the same problem with new version of asterisk but not in old versions. I do not want to try the old versions of asterisk. I really appreciate if someone can