search for: begumisa

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

Does anyone know how to do this with the OH323 channel driver? I want the local (7 digit dialing) to go out an h323 that I have registered to a gatekeeper... can I do something like exten => _7.,2,Dial(OH323/ipofgatekeeper) -----Original Message----- From: Begumisa Gerald M [mailto:beg_g@eahd.or.ug] Sent: Thursday, September 09, 2004 2:37 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Dialing Out through Provider with Authentication On Thu, 9 Sep 2004, Johannes Hollerer wrote: > I try to dial out th...

Hi, I've read through the Asterisk handbook and I'd just like clarification from someone that's implemented the above before. Lets imagine I want to use the CallingCard application and don't want to tell a client to buy a channelbank (the analog extensions are too many to connect to FXS cards), I figure I could set them up as below: Original Existing Setup

Hi, I try to dial out through a Provider, but for that i need to be authenticated - it actually does not work !. What kind of dial command do i have to use when i: - Want to authenticate the user - And dial with that authenticated user an extension What i tried so far exten => _7.,2,Dial(SIP/USERNAME:PASSWORD@PROVIDER.COM/${EXTEN:1}) what have i done wrong ? i always get back a Service

Hello, I've released an Asterisk application under the terms of the GNU GPL. You may find it here: http://psg.com/~begg/projects/ A short exerpt from the README: -- Broadcast is an Asterisk (http://www.asterisk.org) application which you may use to send a generic message over TCP/IP to any number of computers running software configured to listen for these types of messages. Being written

Hi I just got an AA50 from Digium and the paging command reboots asterisk when you use it. Digium says it is a requested feature and is of low priority. Is there any other way to page 10 Grandstream gxp2000 phones with meetme or some other command than the page command. Thanks in advance. Kelly -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I would like to realize a voip testbed that should simulate the scenario in which two companies have an asterisk PBX connected through a PRI-ISDN to the Telco operator. I have no experience of T1/E1 connection but I think that the above could be relized with 3 asterisk boxes equipped with Digium TE405P cards. One of the box will represent the Telco, the other two, the two companies PBX. I

Hello, Could anyone please give some information on configuring asterisk as a gateway. What contents have to add in h.323 .conf and extensions.conf files ? Thanks & Regards Bincy K Philip -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071102/53be51ce/attachment.htm

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the

Hi, I have a polycom 601 with 3 expansion modules attached and about 40 extensions. When someone does a "page all" from that phone, sometimes the expansion modules reboot and sometimes the phone itself reboots. This happens randomly. I suspected it to be a problem with the presence / buddy watch feature in the directory on the phone so I turned that off for all the extensions