search for: beaglebon

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greeting- I have tinc on the following: 2 - x86 FreeBSD boxes 1 - ARM FreeBSD box 1 - x86 Macintosh All the x86 boxes can speak with each other, but none of the x86 boxes can speak with the ARM box. The ARM box says: [root at beaglebone /usr/local/etc/tinc/wdl]# tincd -D -n wdl tincd 1.0.24 (Mar 8 2015 14:55:57) starting, debug level 0 /dev/tun0 is a Generic BSD tun device add net 192.168.254.0: gateway 192.168.254.113 fib 0: route already in table Script tinc-up exited with non-zero status 1 Ready Bogus data received from net01...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 10 Mar 2015 02:10:51 +0100 Guus Sliepen <guus at tinc-vpn.org> wrote: > If that was not the problem, then another issue might be the version > of OpenSSL on your Beaglebone not supporting the Cipher or Digest > algorithms that you are using. > This seems the most probable from the various tests and key changes and so forth that I have done. Yes I went through everything else you mention in the FAQ and your last email. I am calling tincd on the beaglebone as...

...sudo apt-get install samba" it seems like there are a lot of destination directories (bin, lib, etc). Is there a known set of .configure options that will essentially do what "apt-get install samba" does? >> Regarding the module... >> This is for a small embedded system (beaglebone) so that multiple PCs can access various networked files and trigger some switches (gpio pins). >> Probably not very generically useful; but if I get it working I'll gladly submit it. >> Ed > > having never used/seen a beaglebone, isn't it something like an raspberry pi,...

I am having problems with system crashes in a dahdi/asterisk compile.? The is on a Beaglebone Black running Debian 3.8.13 kernel. Dahdi is patched and asterisk is also custom so this must be compiled from source. I believe I have the proper header and source files for the running kernel. Both dahdi and asterisk compile and install. When run asterisk runs for anywhere from 10 minutes to a...

...uivalent of "sudo apt-get install samba" it seems like there are a lot of destination directories (bin, lib, etc). Is there a known set of .configure options that will essentially do what "apt-get install samba" does? Regarding the module... This is for a small embedded system (beaglebone) so that multiple PCs can access various networked files and trigger some switches (gpio pins). Probably not very generically useful; but if I get it working I'll gladly submit it. Ed

...seems like there are a lot of destination >>> directories (bin, lib, etc). Is there a known set of .configure >>> options that will essentially do what "apt-get install samba" does? >>> Regarding the module... >>> This is for a small embedded system (beaglebone) so that multiple >>> PCs can access various networked files and trigger some switches >>> (gpio pins). >>> Probably not very generically useful; but if I get it working I'll >>> gladly submit it. >>> Ed >> >> having never used/seen a...

...gt; 1 - x86 Macintosh > > All the x86 boxes can speak with each other, but none of the x86 boxes > can speak with the ARM box. First of all, tinc should not have any problem handling mixed endianness. Also, most ARM systems nowadays are running in little-endian mode anyway. Debian on a Beaglebone Black sure is, I don't know about FreeBSD though. > The ARM box says: > > [root at beaglebone /usr/local/etc/tinc/wdl]# tincd -D -n wdl > tincd 1.0.24 (Mar 8 2015 14:55:57) starting, debug level 0 > /dev/tun0 is a Generic BSD tun device > add net 192.168.254.0: gateway 192...

...2015 at 09:52:51PM -0400, Brett Wynkoop wrote: > This seems the most probable from the various tests and key changes and > so forth that I have done. Yes I went through everything else you > mention in the FAQ and your last email. Ok. Can you try copying the tinc configuration from the Beaglebone to an x86 machine, including the public and private keys, and run tinc on the latter? If it then runs fine, then there is indeed a problem with tinc on ARM FreeBSD, if not then the problem is with the private and/or public key. > Here is my tinc.conf > > [wynkoop at beaglebone /usr/loca...

Hello, has anyone running a linphone-application on am335x (like beaglebone) with opus codec. My CPU has extreme high load, wenn ist start with opus codec. Is there a possibikity tu optimize f?r this single core ARM? Thanks Helmut Sholz ______________________________ BAYERISCHER RUNDFUNK Rundfunkplatz 1 80335 M?nchen HA IT und Medientechnik Abteilung Systemservice Funk...

This is with Linux on BeagleBone Black (Cortex-A8), regressed recently: FAIL: LLVM :: MC/ARM/basic-arm-instructions.s (5404 of 8944) ******************** TEST 'LLVM :: MC/ARM/basic-arm-instructions.s' FAILED ******************** Script: -- /havana/work/llvm/build/Release+Asserts/bin/llvm-mc -triple=armv7-apple-darwin -m...

Hi All, Thanks for all of the help I've been given in the past and info I've picked up from this list over the years. I have an "official" Asterisk appliance (the AA50) running my PBX at home (we previously also had an AA50 in a satellite office-that one was recently retired and replaced with Asterisk running on commodity server hardware). Anyway - the AA50

On 7 October 2013 18:33, İsmail Dönmez <ismail at donmez.ws> wrote: > This is with Linux on BeagleBone Black (Cortex-A8), regressed recently: > Hi Ismail, Are you running this regularly? Do you know which commit regressed? Or at least a window? Unfortunately, we don't have Cortex-A8 buildbots, but this is something I want to do, if there is enough interest in the community. cheers, --ren...

Hi , we use a barix <http://www.barix.com/products/instreamer-family/barix/Product/show/instreamer-100/?tx_wvbrxproducts_barixproductslist%5Bbutton%5D=&cHash=e3487444dea24a6b24aa0701dc1fa924>as our icecast client right now ( >400$ ) and I though I would try to replace it with a Raspberri Pi. Did anyone found a cheap and supported usb audio card that would have basic good input (

...ported usb audio card that would have > basic good input ( only with 3,5 mm jack) > Why trying to shoe-horn that thing into unsuitable hardware? I'd just go with one of the other embedded boards that are not much more expensive and will actually get you sensible results. BeagleBoardXM BeagleBone with Audio cape Olinuxino A13 ... I hear there is a new BeagleBone coming that might actually have all on board for a price in the ballpark of the oA13 board. USB audio combined with embedded hardware (and especially the RPi with its known problematic USB) is a recipe for sub par results. Che...

...et > install samba" it seems like there are a lot of destination > directories (bin, lib, etc). Is there a known set of .configure > options that will essentially do what "apt-get install samba" does? > Regarding the module... > This is for a small embedded system (beaglebone) so that multiple PCs > can access various networked files and trigger some switches (gpio pins). > Probably not very generically useful; but if I get it working I'll > gladly submit it. > Ed having never used/seen a beaglebone, isn't it something like an raspberry pi, in w...

...observed lesser improvement in performance (3.42%) for overall encode use case for "voip 48000 2 24000". This is somewhat expected as cel_pitch_xcorr_c was not the main contributor for performance in this SILK encoder use case. For detailed information on how I measured performance on my Beaglebone Black (Cortex-A8), please see "celt_pitch_xcorr (float) Neon Optimization" section of [1] [1]: https://docs.google.com/document/d/1L6csATjSsXtzg_sa1iHZta8hOsoVWA4UjHXEakpTrNk/edit?usp=sharing > > Even though this primarily affects the encoder, as a sanity check, it's always...

...will automatically allow the subsystem to use the functions and features of the UPS.” > > Is there a known way to *send* APC smart signaling to an external device from NUT? While it would theoretically be possible to emulate an APC UPS over USB, you would need an embedded system such as a BeagleBone Black which implements the peripheral side of USB, versus the host side that PCs have. There is also the possibility that the NAS software is sending different USB requests than what NUT uses, so that could be interesting to debug. You could also check with the apcupsd.org <http://apcupsd.org/...

Hello!, i've just compared the 1.0.3 release with the master branch on a BeagleBone Black (AM335x 1GHz ARM Cortex-A8 with NEON floating-point accelerator) and Arch Linux ARM. At the moment I dont no why, but I see that 1.1 is much slower in encoding. Are there any default changes, that I missed and could explain this? Normaly I suggested a better performance with 1.1 and the ARM...

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS

...T on OS X over the years, so I haven't put a lot of effort into documenting the process end-to-end. I don't mind answering questions, though. > > IMHO, the quickest way around the macOS USB mess is probably to run the driver on an embedded Linux or FreeBSD system (e.g. Raspberry Pi, Beaglebone), and have the iMac connect to the embedded system as a slave. This has the disadvantage of adding another potential point of failure (or two, if you count the network) into the system, and there is a potential issue if the Mac is asleep when the power goes out, but if we had more frequent power f...