Displaying 20 results from an estimated 180 matches for "bcdusb".
2007 Mar 12
0
[PATCH] fix usb hid and mass-storage protocol revision
...ing a Solaris x86 kernel with verbose kernel messages enabled
inside qemu, with an usb hid or usb mass-storage device, then the Solaris
kernel reports these usb devices as implementing "USB 0.10" protocol.
The comment in the code tells me these device implement v1.0 protocol.
The 16-bit bcdUSB word word in the device descriptor has the protocol
revision swapped and uses a slightly wrong value. Probably a typo after
copying the descriptor data from the hw/usb-hub.c file, which uses
v1.1 USB protocol.
The attached patch fixes the usb hid and mass-storage protocol revision
to report &quo...
2008 Dec 01
1
Unitek Self Protek Mistral 1000ipF
...000] usb 1-2: new low speed USB device using uhci_hcd and
address 10
[42953294.320000] usb 1-2: no configurations
[42953294.320000] usb 1-2: can't read configurations, error -22
lsusb:
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.17-12-serv...
2013 Jan 13
0
Evolution 850 not recognized by NUT 2.6.5?
...83570Device does not match - skipping
? ?0.283618No appropriate HID device found
? ?0.283671No matching HID UPS found
root at ubuntu:/etc/nut# lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
? bLength ? ? ? ? ? ? ? ?18
? bDescriptorType ? ? ? ? 1
? bcdUSB ? ? ? ? ? ? ? 2.00
? bDeviceClass ? ? ? ? ? ?9 Hub
? bDeviceSubClass ? ? ? ? 0 Unused
? bDeviceProtocol ? ? ? ? 0 Full speed (or root) hub
? bMaxPacketSize0 ? ? ? ?64
? idVendor ? ? ? ? ? 0x1d6b Linux Foundation
? idProduct ? ? ? ? ?0x0002 2.0 root hub
? bcdDevice ? ? ? ? ? ?3.02
? iManufacturer ?...
2007 Aug 19
4
OMRON BX35F
Hi nut-upsdev,
I have just got OMRON BX35F. Only object
files and usage information is included.
Where should I start to help you to get it
supported? Any interest in supporting it at all?
2016 Oct 12
2
Unable to find driver for a supported device
# usbconfig -d ugen0.2 dump_device_desc
ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x09ae
idProduct = 0x0001
bcdDevice = 0x0001
iManufacturer = 0x0001 <TRIPP LITE>
iProduct = 0x0002 <TRIPP LITE SMART15...
2007 May 05
1
powermust usb
...o
/etc/udev/rules.d/70-nut-usbups.rules:
# OMRON - usbhid-ups
SYSFS{idVendor}=="06da", SYSFS{idProduct}=="0003",
MODE="664", GROUP="nut"
# lsusb -v
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-gentoo-r5
ehci_hcd
i...
2016 Oct 11
2
Unable to find driver for a supported device
Hello everyone,
I have a Tripp-Lite UPS (smart1500rmxl2ua) I'm trying to get working with nut.
This is a FreeBSD 10.3 box. I've tried using the usbhid-ups<http://networkupstools.org/docs/man/usbhid-ups.html> driver but everytime I try to start up nut, I get this:
# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
2016 Sep 08
0
blazer_usb MEC0002 problem Fry's Electronics (Turbo-X)
On Sep 8, 2016, at 4:26 AM, Vassilis Virvilis <vasvir at iit.demokritos.gr> wrote:
>
> The 1000 (bcdUSB 1.00) works with blazer_usb while the 1500 (bcdUSB 1.10)
> doesn't.
>
From the lsusb descriptor output, the 1500 seems to implement the HID Power Device Class (PDC) spec - so it might be possible to adapt usbhid-ups to work with it.
What happens if you run the driver in "explore&q...
2023 Jun 19
1
had to reinstall on new drive, lost all nut related .conf's
Greetings Jim & friends;
Just installed nut 2.7.4 on a debian bullseye system. ups is:
Bus 001 Device 006: ID 051d:0003 American Power Conversion UPS
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x051d American Power Conversion
idProduct 0x0003 UPS
bcdDevice 0.01
iManufacturer 1 American Power Con...
2016 Jul 26
0
Two UPS with same vendor ID
...r USB to Serial
Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
my lsusb -vd 0665: says:
pi at elektra:~ $ lsusb -vd 0665:
Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665 Cypress Semiconductor
idProduct 0x5161 USB to Serial
bcdDevice 0.02
iManufact...
2015 Apr 03
2
mge-shut driver fails almost after every reboot
...get_descriptor(n 21, 9)
0.111394 shut_wait_ack(): ACK received
0.185328 entering shut_get_descriptor(n 01, 18)
0.273455 shut_wait_ack(): ACK received
0.423238 Device Descriptor:
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0110
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08
idVendor: 0x0463
idProduct: 0xffff
bcdDevice:...
2008 Feb 01
2
Four UPS's via usb.
> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one
> computer using megatec_usb driver. But megatec_usb completly ignores port
> directive in ups.conf, I even try port = /dev/null and megatec_usb founds
> ups and it works.
The 'port' is not used for USB connected devices, it's only needed for
compatibility reasons.
> Problem is that
2020 Jun 10
1
greecell ups with blazer_usb
...quot; and this UPS have no problem on a raspberry pi3.
With the same configuration!!
What I can do??
Thanks in advance
DL
usbconfig dump_devices_des
ugen0.4: <MEC MEC0003> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
(100mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x0001
idProduct = 0x0000
bcdDevice = 0x0100
iManufacturer = 0x0001 <MEC>
iProduct = 0x0002 <MEC0003>
i...
2023 Jun 20
1
had to reinstall on new drive, lost all nut related .conf's
...57, gene heskett wrote:
> Greetings Jim & friends;
>
> Just installed nut 2.7.4 on a debian bullseye system.? ups is:
> Bus 001 Device 006: ID 051d:0003 American Power Conversion UPS
> Device Descriptor:
> ? bLength??????????????? 18
> ? bDescriptorType???????? 1
> ? bcdUSB?????????????? 2.00
> ? bDeviceClass??????????? 0
> ? bDeviceSubClass???????? 0
> ? bDeviceProtocol???????? 0
> ? bMaxPacketSize0??????? 64
> ? idVendor?????????? 0x051d American Power Conversion
> ? idProduct????????? 0x0003 UPS
> ? bcdDevice??????????? 0.01
> ? iMan...
2006 Jul 24
1
Fw: INFOSEC 500 XP en USB et drivers newhidups avec '-x generic'
...-debian:/usr/local/ups/bin# uname -a
Linux danez-debian 2.6.15 #1 Tue Jul 4 22:55:24 CEST 2006 i686 GNU/Linux
lsusb donne....
danez-debian:/lib/nut# lsusb -v
Bus 001 Device 004: ID 0665:5161
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665
idProduct 0x5161
bcdDevice 0.02
iManufacturer 1 Cypress...
2010 Apr 01
1
amacrox ap1000 problems
...I?ve also tried to set a specific usb port and change driver.
My ups is a AMACROX 1000
http://www.amacrox.com//english/01_product/02_01detail.aspx?pdid=46
and it should be the following usb device
lsusb -D /dev/bus/usb/008/003
Device: ID 0665:5161
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0?0665
idProduct 0?5161
bcdDevice 0.02
iManufacturer 1 Cypress Semiconductor
iProduct 2 USB to Serial
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2...
2012 Feb 21
1
eaton evolution not shutting down
...> Communication with UPS established
> entering shut_get_descriptor(n 21, 9)
> shut_wait_ack(): ACK received
> entering shut_get_descriptor(n 01, 18)
> shut_wait_ack(): ACK received
> Device Descriptor:
> bLength: 0x12
> bDescriptorType: 0x01
> bcdUSB: 0x0110
> bDeviceClass: 0x00
> bDeviceSubClass: 0x00
> bDeviceProtocol: 0x00
> bMaxPacketSize0: 0x08
> idVendor: 0x0463
> idProduct: 0xffff
> bcdDevice: 0x0100
> iManufacturer:...
2014 Aug 13
0
multiple identical UPS on same server
[please keep the list CC'd. Thanks!]
On Wed, Aug 13, 2014 at 9:33 AM, Marcello Vezzelli <mv at 3cx.com> wrote:
> I noticed that 2 of Sweex UPS have an identical serial number 20100813,
> which looks like a date.
> The other one has an empty serial number.
>
> The blew one had the serial number, so I'm left with two different UPSes
> from the serial number point of
2016 Jan 22
1
Not getting nut to work with Eaton 5115
...y-install-monitor-eaton-ups
Hope that you can find out what is wrong by the provided info in the email
Best Regards,
Magnus Karlsson
# lsusb -s 001:005 -v
Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x06da Phoenixtec Power Co., Ltd
idProduct 0x0002 UPS
bcdDevice 1.00
iManufacturer...
2010 Sep 16
1
Soyntec Sekury A600 VA
...er
of the list give me a little help on this. Can I use any specific
sub-driver. Any advice about best settings? The output of 'lsusb
-vvv' is:
Bus 001 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665 Cypress Semiconductor
idProduct 0x5161 USB to Serial
bcdDevice 0.02
iManufacturer...