search for: atapi

...0 - class: IDE bus: PCI detached: 0 driver: sata_nv desc: "nVidia Corporation MCP61 IDE" vendorId: 10de deviceId: 03ec subVendorId: 1849 subDeviceId: 03ec pciType: 1 pcidom: 0 pcibus: 0 pcidev: 6 pcifn: 0 ------- dmesg -------- astFailedSense=0x03 } ide: failed opcode was: unknown ATAPI device hdb: Error: Medium error -- (Sense key=0x03) (reserved error code) -- (asc=0x02, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 00 34 e7 00 00 20 00 00 00 00 00 00 00 " end_request: I/O error, dev hdb, sector 54172 hdb: media error (bad sector): st...

...0 - class: IDE bus: PCI detached: 0 driver: sata_nv desc: "nVidia Corporation MCP61 IDE" vendorId: 10de deviceId: 03ec subVendorId: 1849 subDeviceId: 03ec pciType: 1 pcidom: 0 pcibus: 0 pcidev: 6 pcifn: 0 ------- dmesg -------- astFailedSense=0x03 } ide: failed opcode was: unknown ATAPI device hdb: Error: Medium error -- (Sense key=0x03) (reserved error code) -- (asc=0x02, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 00 34 e7 00 00 20 00 00 00 00 00 00 00 " end_request: I/O error, dev hdb, sector 54172 hdb: media error (bad sector): st...

Hi, I'm trying to write short ATAPI driver (boot loader) to avoid poor BIOS. It should get in single CD sector so it could even work with bad BIOSes. It could also provide correct root device to the kernel. Is someone interested in using such loader? Krzysztof

...s=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 * signifies the current active mode Any suggestions welcomed. Thanks! --Chris

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM BDC-202, 1.01, max UDMA/66 ata3.00: configured for UDMA/66 a...

I would like to develop a system where by I can boot any of the machines on my system - and select from a menu what I would like that particular client to do. For example, maybe load a bootdisk image from a network share, and boot that. Or boot the first partition on the local disk.

...ntelide. Proceed like that will all the missing keys & values[1], 'cd ..' when you're done with all the values of a key, to proceed for the others - - cd .. (you're now in Control) - - cd .. (you're now in ControlSet001) - - cd Services - - Check you have the following keys: atapi and intelide - - Add the missing ones[2]. REG_DWORD type is 4 when doing nv. (like nv 4 ErrorControl) - - You're done, so: q to quit chntpw (of course, reply 'y' to write hives) Back to your linux term: - - cd ../drivers/ - - Check you have atapi.sys and intelide.sys. In case you don...

...ils to boot. The boot freezes after probing for my hard drives during the probe of the CDROM. It just sits there, seemingly forever, though I have never waited longer then a few minutes. The system is a SuperMicro C25BX mother board. The DVD is PATA, reported on boot of 8-Stable as: acd0: DVDR <ATAPI DVD A DH20A4P/9P59> at ata2-master UDMA66 If I unplug the CDROM, it boots fine, but I really need the device on the system, so I really can't leave it unplugged. Also, after the 9 kernel is installed, my Mk file have been updated so that I can't build some ports if I boot the 8.2 kernel...

Guys, I have one of my Windows domU getting slow and sometimes locking, every day. I need to destroy it and create it again and again... Can someone help me? My Xen is 3.3.1 with Linux 2.6.18.8-xen compiled from sources on Ubuntu 8.04. I have others Windows 2003 on the same hypervisor without any problems... See pictures attached, please... Thanks, Thiago

Hi... I have a Dell Latitute with an ATA/ATAPI-5 T13 1321D and it would seem that my disk access is extremely slow. I have the latest updated kernel from RedHat 8.0 kernel 2.4.18-27.8.0. Somehow I think it is related to the UDMA stuff (shows my level of understanding). I have run hdparm and although I think I should at least udma level 5, I...

...ng it... isolinux: extremly broken bios detected, last ditch attempt with drive=9F isolinux: disk error 80, ax=432E, drive 9F --8<-- My configuration is: VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 CMD649: IDE controller on PCI bus 00 dev 48 hda: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive hdc: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive hde: ST380021A, ATA DISK drive CMD649 is an external IDE controller, that has hard drive connected to it (it says something about installing drive ST38... at 80h.) The problem does not exist when I remove CMD649 fr...

Hi! Is anybody able to boot FreeBSD 5.x-STABLE from a ATAPI ZIP 750 .? I tried to, but it didn't work. I mounted the ZIP from a running 5.X-STABLE and made the normal release procedure (installworld / installkernel .). I also gave bootcfg a try. But nothing helped. Or is there no way of booting a FreeBSD 5.X-STABLE from ZIP? Yours Stefan

...llo, I'm building a new system for a friend and I bought a Pioneer DVD-120s drive for him because it was a newer version of the drive I use (DVD-116) and my friend uses (DVD-106s) with FreeBSD. The problem is that FreeBSD cannot probe the drive for some reason. I've tried twiddling the ATAPI_DMA bit, rescanned the drive, and toyed with the cable, but nothing seems to work. The BIOS can see the drive, in fact I can boot FreeBSD using the El-Torrito boot sector on the drive, but I cannot use the CD as the distribution in the installer. FreeBSD 4.8-RELEASE boots all the way up to the...

...rnel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C DE02> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed cd1 at ata1 bus 0 scbus3 target 1 lun 0 cd1: <PHILIPS DVD+-RW DVD8701 5D24> Removable CD-ROM SCSI-0 device cd1: Serial Number MY0P92257015956T02SA cd1: 33.300MB/s transfers (UDMA2, A...

Hi, The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, 0x00000000, 0x00000000) Nothing more! (Of course there are some inrelevant text line about chkdsk, etc.) > Basically, what's required is the "STOP:" line + the image where it > fails (so, the line below). Image being likely to be NTOSKRNL.EXE > Nothing about NTOSKRNL.EXE on the blue screen! > >

My apologies in advance for asking such an elementary question. I called myself searching the Installation Guide and Deployment Guide, with no success. The situation is that I bought a Lite-On ATAPI iHAP122 that will not burn DVDs unless I use hdparm to turn dma off. I bought that drive because it was a rare beige drive. Until I can find a decent DVD burner and/or get a Windows machine put together strictly for doing BIOS updates, running with dma disabled seems to be the best solution....

..._KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci #device agp # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numberi...

...de_status: error=0x40 { LastFailedSense=0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 } ide: failed opcode was: unknown hdc: ide_intr: huh? expected NULL handler on exit hdc: ATAPI reset complete end_request: I/O error, dev hdc, sector 5118720 Buffer I/O error on device hdc, logical block 639840 hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 } ide: failed opcode was: unknown hdc: cdrom_decode...

Hello everybody I would like to build a bootable CD from my running SuSE 7.3 Kernel 2.4.10. The goal is to have a prebuilt system on CD which would install everything from a compressed image on the same CD, some kind of an emergency or initial setup CD. So I startet with an directory called root_tree, placed the isolinux directory and the binaries there. I copied the initrd from the /boot

...device that plugs into the IDE connector on the motherboard, and i'm trying to get syslinux to work with it, so I can load a Linux kernel and an initrd. I'm not having any luck with it. Then it dawned on me that the boot loader in syslinux might be expecting a floppy drive rather than an atapi hard disk. Any thoughts? Thanks, Jim McQuillan jam at Ltsp.org