search for: atapci0

...of web traffic per month for the main site and then some 40 domains with mail and small web pages. (hence - it's NOT that busy yet) I started with 7.1-RELEASE-pX since I didn't have problems straight off - but it didn't last long. After a few days of running, the interrupt storm on atapci0 starts to show. It slowly builds up and continues. When it reaches 150-200k/sec. I reboot just to be on the safe side. I have also upgraded to 7.1-STABLE to get all the ATA driver changes S.O.S. have been including. Still no visible change. To give you an impression of its impact, I will let th...

...Thoughts are welcome. I don't have physical access to the machine for quite a few more hours, but when I do should be able to net-boot into the earlier freebsd stable/9 that I originally installed onto this host, and can try a few more things. - Chris atapci0: <AcerLabs M5229 UDMA66 controller> port 0x10200-0x10207,0x10218-0x1021b,0x10210-0x10217,0x10208-0x1020b,0x10220-0x1022f at device 13.0 on pci0 atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance ata2: <ATA channel> at channel 0 on...

...e any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0- 0x7 irq 0 at device 31.2 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 76319MB <ST380013AS> [155061/16/63] at ata0-master UDMA...

...the point where it lists the ATA devices, then gets in an infinate loop with ATAPI Timeouts. FreeBSD 5-CURRENT does not get in an infinate loop, but returns the following error on boot: ata1-master: timeout waiting for interrupt ata1-master: ATAPI identify failed Using the following hardware: atapci0: <VIA 8233A UDMA133 controller> port 0xd000-0xd00f at device 17.1 on pci0 The same problem occured with this hardware: atapci0: <VIA 8233 ATA100 controller> port 0xe000-0xe00f at device 17.1 on pci0 Windows XP has no trouble detecting or using this drive. I have tried setting the...

Hi there, System is FreeBSD 4.9 Stable Had a problem during a portupgrade that when portupgrade did some cleaning a directory could not be deleted because it were not empty. However, it was empty. rm -rf didn't help either. Because I didn't know what to do I decided to boot. At system startup fsck was started which produced the message: unexpected softupdate inconsistency and also that

...ller driver v1.1 (Feb 24 2008 19:59:27) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf200...

...rq 5 at device 7.0 on pci2 chip1: <PCI to CardBus bridge (vendor=1180 device=0476)> irq 11 at device 7.1 on pci2 pci2: <unknown card> (vendor=0x1180, dev=0x0552) at 7.2 irq 9 isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x8400-0x840f,0x8800-0x8803,0x9000-0x9007,0x9400-0x9403,0x9800-0x9807 mem 0xd5800000-0xd58003ff irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel 82801CA (ICH3)> port 0xe100-0xe13f,0xe000-0xe0...

...bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xe000-0xe00f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 fxp0: <Intel Pro 10/10...

..., and the problem occurs in the same way. I realized that it generates a huge number of interruptions em2 over 200 thousand. #vmstat -i interrupt total rate irq16: em1 12891 40 irq17: em2 546630 1713 irq19: atapci0 5181 16 irq23: ehci0 ehci1 1049 3 cpu0: timer 637069 1997 irq256: em0 1557 4 cpu3: timer 636939 1996 cpu2: timer 636939 1996 cp...

I can't install freebsd 6.0 STABLE amd64 on my notebook: HP Pavilion 2420la AMD Turion ML 32 , 1024 RAM, 80 GB HD, ATI Radeon XPRESS 200M. I try all modes , default, whitout acpi, safe mode. In all the cases after the next message the installation doesn't work: timecounters tick every 1000 msec Linux ELF exec handler install lo0.bpf attached I installed linux with parameter noapic

...:0d:9d:71:9e:43:0c:6a @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x12bc000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode atapci0: <AcerLabs M5229 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f at device 16.0 on pci0 atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA c...

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

...r> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 16.3 irq 10 isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <VIA VT8235> port 0xdc00-0xdcff irq 11 at device 17.5 on pci0 pcm0: <unknown ac97 codec> (id=0x56494161) vr0: <VIA VT6102 Rhine II 10/...

I've tested both 6.3 and 7.0-RC2, amd64 architecture, and have found the occurrence of an interrupt storm using an ASUS A8N-SLI Premium (nForce 4) motherboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977...

I just noticed the 4.9-20030914-PRERELEASE and made a set of installation boot floppies from it to see which of the devices in my new PC the PRERELEASE would support. It wedged hard during the boot autoconfiguration monologue, just after typing these lines on the console: atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 atapci1: <Generic PCI ATA controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq...

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...board > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard > pci0: <PCI bus> on pcib0 > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX3 WDMA2 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > vgapci0: <VGA-com...

...md0: Malloc disk Using $PIR table, 6 entries at 0xc00fdf00 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586 ATA33 controller> port 0x7800-0x780f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x1106, dev=0x3040) at 7.3 pci0: <unknown card> (vendor=0x7401, dev=0x8139) at 8.0 irq 26 rl0: <RealTek 8139 1...

Hi, I am having trouble using my dvd drive in KDE, as it wont mount, using dvd, cd, cdrw. all I get is the error message saying: Could not mount device. The reported error was: cd9660: /dev/acd0: Invalid argument Has anyone got a solution for this? Thanks, Brian

If you start to experience problems with ata devices, please direct your report this way. Thanks -lq