search for: ata100

...e of 500 should mean 50 seconds, as it counts in 1/10th of a second, right?) SYSLINUX (isolinux) 2.00 ----8<------8<---- SERIAL 0 38400 TIMEOUT 500 DISPLAY about.txt F1 help.txt DEFAULT t LABEL t KERNEL /isolinux/kernel.lnx APPEND console=ttyS0,38400n8 console=tty0 hda=dma,ata100 hdb=dma,ata100 hdc=nodma init=/installer root=/dev/hdc ro devfs=nomount LABEL s KERNEL /isolinux/kernel.lnx APPEND console=tty0 console=ttyS0,38400n8 hda=dma,ata100 hdb=dma,ata100 hdc=nodma init=/installer root=/dev/hdc ro devfs=nomount LABEL setup KERNEL /isolinux/kernel...

...with 1.67). Anyway, I can't get it to work this time. All I see is - -----8<------ Cannot load disk image (invalid file)? - -----8<------ My isolinux/isolinux.cfg file: - -----8<------ DEFAULT t #TIMEOUT 500 DISPLAY about.txt F1 help.txt LABEL t KERNEL kernel.img APPEND ide0=dma,ata100 ide1=dma,ata100 ramdisk_size=65536 root=/dev/cdroms/cdrom0 init=/linux_installer ro LABEL s KERNEL kernel.img APPEND console=tty0 console=ttyS0,9600n8 ide0=dma,ata100 ide1=dma,ata100 ramdisk_size=65536 root=/dev/cdroms/cdrom0 init=/linux_installer ro SERIAL 0 9600 - -----8<------ My ISO buil...

...I'm having a problem with my home server (ASUS A7V133 motherboard) which has a horrible performance with ATA disks connected to an integrated promise controller. Below you can see iozone results of the same disk connected to the primary/ secondary controller versus the promise one. Promise ATA100 controller: ========================= Version 1.02a ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP damocles 1G...

.../ATX 350 A7V266-E VIA KT266A/Socket A/FSB 266/AGP 4X/DMA 100/ATX 410 CUV4X-D VIA 694XDP/Socket 370/DMA 100/AGP Pro/ATX 590 P4S533 SIS645DX/Socket 478/FSB 533/DMA133/CMI8738/Lan 470 P4S133 SIS645/Socket 478/FSB 533/DMA133/CMI8738 340 ÅÍÓ¢£¨Epox£© EP-4BDA2+ Intel 845D/Socket 478/ATA100/AGP 4X/ATX/Raid/AC 97 480 EP-3PTA Intel 815EP-B/ATX/Socket 370/×î¸ß100MHzÍâƵ/AGP 4X/UDMA 100 290 EP-8KHA+ VIA KT266A/Socket A/ATA100/AGP 4X 370 EP-8KHAL+ VIA KT266A/Socket A/AGP 4X/DMA 100/AC97/ATX 340 EP-8KTA3+Pro VIA KT266A/Socket A/ATA100/AGP 4X/RAID 295 EP-3VSA VIA 694T...

.../TV-OUT/Ö§³ÖÀ¶ÑÀ/3K£¤7200 ¶þ.µçÄÔÅä¼þ(RMB.Ôª): A:Ö÷°å: ΢ÐÇ 845Pro2-LE(Socket,i845,SDRAM,AC97Éù¿¨)---530 845Pro (Socket,i845,SDRAM,AC97Éù¿¨)--580 850Pro5 (Socket,i850,8738Éù¿¨)----740 645UITRA (Socket478,SiS645оƬ 3DDR AC97)--480 K7T266Pro (SocketA,KT266,3DDR,AC97)--460 K7T266Pro2-LE(SocketA,AC97,ATA100)---410 K7t266Pro2(SocketA,Ö§³ÖXP,3DDR,AC97)---460 815EPT Pro-NL(Socket370,i815EP,Ö§³ÖÐÂPIII,AC97,ATA100)--410 815EP Pro-R (Socket370,i850EP,IDE RAID) --420 815EP-NL (Socket370,i815EP,AC97) --380 815ET Pro (Socket370,i815E,ÐÂPIII,i752,AC97)- --490 694D Pro2-IR (Socket370,VIA694X/686B,RAID)-----470...

...ç ------0138-50738839 Ò».µçÄÔÅä¼þ(RMB.Ôª): A:Ö÷°å: ΢ÐÇ 845Pro2-LE(Socket,i845,SDRAM,AC97Éù¿¨)---530 845Pro (Socket,i845,SDRAM,AC97Éù¿¨)--580 850Pro5 (Socket,i850,8738Éù¿¨)----740 645UITRA (Socket478,SiS645оƬ 3DDR AC97)--480 K7T266Pro (SocketA,KT266,3DDR,AC97)--460 K7T266Pro2-LE(SocketA,AC97,ATA100)---410 K7t266Pro2(SocketA,Ö§³ÖXP,3DDR,AC97)---460 815EPT Pro-NL(Socket370,i815EP,Ö§³ÖÐÂPIII,AC97,ATA100)--410 815EP Pro-R (Socket370,i850EP,IDE RAID) --420 815EP-NL (Socket370,i815EP,AC97) --380 815ET Pro (Socket370,i815E,ÐÂPIII,i752,AC97)- --490 694D Pro2-IR (Socket370,VIA694X/686B,RAID)-----470...

I've found a problem with CentOS 3 latest kernel (2.4.21-27.0.1.ELsmp) and megaraid2 driver. Hardware: Dell PE1600SC with CERC ATA100 RAID controller The problem is somewhat similar, but not identical as: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123289 After updating new glibc and kernel packages the new kernel don't boot. Boot fails to mount root fs with "Cannot open root device" message. I doublech...

...ns the following error on boot: ata1-master: timeout waiting for interrupt ata1-master: ATAPI identify failed Using the following hardware: atapci0: <VIA 8233A UDMA133 controller> port 0xd000-0xd00f at device 17.1 on pci0 The same problem occured with this hardware: atapci0: <VIA 8233 ATA100 controller> port 0xe000-0xe00f at device 17.1 on pci0 Windows XP has no trouble detecting or using this drive. I have tried setting the region on the drive and that did not seem to help. Does anybody know what the problem is here? -- \ |_ _|__ __|_ \ __| Jason Andresen jandrese...

An EXT3 filesystem technically isn't supposed to require an fsck, correct? Well, as per my last email re: EXT3 Crash?! I ran an fsck on a couple of my LVMs. It said they were clean, but then I decided to be 100% sure and force an fsck. Error after Error after Error after Error. I wound up losing almost half the data on my LVM due to all the errors. What's the real deal? Am I doing

Hi there, System is FreeBSD 4.9 Stable Had a problem during a portupgrade that when portupgrade did some cleaning a directory could not be deleted because it were not empty. However, it was empty. rm -rf didn't help either. Because I didn't know what to do I decided to boot. At system startup fsck was started which produced the message: unexpected softupdate inconsistency and also that

...uttle systems. You didn't provide any detail of what hardware you have hooked up to the motherboard. Do you actually have any SATA devices hooked up to the SATA ports? What devices? This is why I ask: I see a Western Digital hard disk which shows up as ad0 on that system. It's claiming ATA100 mode, but there are features of the ICH7 (often called "Compatibility Mode" in BIOSes) which allow a SATA device to appear as a PATA device to work with older operating systems such as MS-DOS. I've looked at the SD30G2 user manual, and they do not appear to let you enable that mode....

I am attempting to install 7.1-BETA2 (from CD) onto a PC with a Promise SX4060 RAID controller and two Seagate 120GB ATA disk drives. The boot from CD keeps repeating the following (error) messages: (I'm retyping here) ============================================================================ ================== ad4: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing

Howdy. I apologize for vagueness of this report but I am not immediately sure how to proceed with this or what details will be relevant. I look after a community server which has been running just fine for the last 6 months or so with no disk issues at all. The box has an all in one Shuttle motherboard which uses the VIA 8233 ATA133 disk controller according to what I see from dmesg. The

...i2 chip1: <PCI to CardBus bridge (vendor=1180 device=0476)> irq 11 at device 7.1 on pci2 pci2: <unknown card> (vendor=0x1180, dev=0x0552) at 7.2 irq 9 isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x8400-0x840f,0x8800-0x8803,0x9000-0x9007,0x9400-0x9403,0x9800-0x9807 mem 0xd5800000-0xd58003ff irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel 82801CA (ICH3)> port 0xe100-0xe13f,0xe000-0xe0ff irq 11 at device 31....

...port 0x9000-0x90ff mem 0xd9000000-0xd90000ff irq 11 at device 3.0 on pci2 rl0: Ethernet address: 00:50:ba:60:7b:83 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: <HighPoint HPT370 ATA100 controller> port 0xa400-0xa4ff,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 10 at device 6.0 on pci2 ata2: at 0x9400 on atapci0 ata3: at 0x9c00 on atapci0 isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: &lt...

...disk is under heavy activity. I have attached my kernel config. If you want lspci -v or other info out of /proc just ask. It only seems to happen when logging into X or just after so I don't see any error messages and nothing in the logs. AMD Athlon 1.33ghz - 10*133 512mb PC133 KT7A-RAID IBM ATA100 7200rpm 45GB - on HPT370 controller Hercules Prophet II MX 32mb - Geforce2 MX - using Nvidia 1251 drivers 3Com 3cSOHO100-TX Hurricane - standard kernel drivers SBLive 5.1 - using recent CVS drivers Happauge WinTV- bttv -0.7.79

...use but have dtime set and that some files are illegal sockets. Now this just doesn't sound healty to me ... Should I be worried? Something fishy is going on here ... memtest says it's not ram, harddrive is IBM IC35 (i thought that only GXF75 were unreliable and even those only on certain ata100 controllers) on pio mode, i have s.m.a.r.t running and nothing from it in the logs ... Well, i'm lucky this is just my personal workstation. Is there some chance that what I'm expiriencing is only a software error? If so, I might compile my next kernel with jbd debugging on. (currently 2.4...

Hi, I finally set up samba 3 with ads, and acl support and everything works just great. The server is an AMD Duron 1200Mhz, 256Mb 266Mhz Ram, 2 ATA100 disks 10 Gb RAID1, 2 ATA133 200Gb RAID1 disks each one master on a separate ide port. Forgive my english, it's my 17th consecutive hour at work and I'm pretty tired. This server, that it's going to replace a win2k box, it's a fileserver, member of the active directory and has many s...

Dear R-devel, Has anyone played with this? http://www.amd.com/us-en/Processors/DevelopWithAMD/0,,30_2252_2282,00.html <http://www.amd.com/us-en/Processors/DevelopWithAMD/0,,30_2252_2282,00.html> . I'll probably give it a shot... Best, Andy Andy Liaw, PhD Biometrics Research PO Box 2000, RY33-300 Merck Research Labs Rahway, NJ 07065 mailto:andy_liaw@merck.com

...<PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xe000-0xe00f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 fxp0: <Intel Pro 10/100B/100+ Ethernet> po...