search for: ata1.00

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:00:00/40 Emask 0x409 (media error) <F> [

Hello, I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely. I noticed a problem with Fedora 16 Xen HVM guests though. The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive.. Full HVM guest kernel dmesg attached to this email. See the end of this email for Xen cfgfile for the

Hello, A message was already posted here regarding this issue- I experience the same problem with 6 machines, all with Hitachi harddrive, VIA Motherboard which uses the sata_via driver: Once every few days each machine freezes or just stops reading from the HD and throws i/o error messages as pasted below. Note that the first "ata exception Emask" errors apear right after booting,

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Could someone please tell me what these error are and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Despite the error messages, the disks seem to be working with no problems. Could someone please tell me what these error are and if there is some known way to prevent them? I searched the Net for these errors and they seem

Hi All, I am fairly certain that this disk is failing in my server, and I am replacing it straight away anyway. However, I'd appreciate the views of the list just to be sure as I value your opinion(s). I got these errors, once only so far, in /var/log/messages. This disk has / on it. Oct 5 08:34:47 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 Oct 5 08:34:47

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

Hi All, I know Centos 5 is almost EOL and all this is old but.... I'm helping a colleague who has moved a Centos 5 install on an IDE disk to system with a Foxconn M'board. His idea is to use the SATA interface that's on the Foxconn. The thing boots OK and then gets into a loop trying to start the interfaces to the SATA disks. Oceans of stuff like this in /var/log/messages Aug 7

https://bugs.freedesktop.org/show_bug.cgi?id=95520 Bug ID: 95520 Summary: Error when recovering from suspend mode: fifo: ce0 engine fault on channel 0 Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi folks, I inherited a very old computer (I guess about 8 years old) which I'd like to use for some training on CentOS. I downloaded images for CentOS 6.4 i386 (DVD 1 and 2) and burned them onto discs. After inserting DVD 1 into drive and booting, on the "Welcome to CentOS 6.4!" screen I select "Install or upgrade an existing system". I then skip the media test and

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

Everyone, I am at a loss on this problem would appreciate some guidance as to where to start to fix it. I noticed that my home gateway server was not being updated with the new kernel and other software, and when I ran yum it aborted with the following notices. I tried a yum clean all, but this did not fix the problem. I thought the problem may be related to one of the repos, but I have other

Hi All, Newbie here! I was wondering if anyone has succeeded in getting NCQ enabled with the ServerWorks chipset in the 2.6.18 kernel. I am running a Dell 1435/CentOS 5.0-x86_64 with dual 250GB Western Digital NCQ supported drives, when I load up the OS I get these messages: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48

Andrew, thank you for your help! Could a "Bus error" be related to a hardware problem? Never seen it before. Anyways, here is the output of my debugging session (I hope I did everything correctly): [root at server bin]# gdb --args python /usr/local/samba/bin/samba-tool dbcheck GNU gdb (GDB) Red Hat Enterprise Linux (7.2-75.el6) Copyright (C) 2010 Free Software Foundation, Inc.

I am trying to get a pv_ops dom0 working for testing, but I am running into an elf_init error: (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_init: not an ELF binary Full output attached. >From what I have read on the mailing lists, it seems that it is usually a problem with either grub or a corrupt dom0 kernel. Attached is my kernel config (2.6.28-rc6-tip). I followed the instructions on:

Hellow all, i need help to fix this bug: ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219) Because of this first errors i get this after, and it causes don''t work USB ports and some PCI cards on the system: can''t find IRQ for PCI INT A; please try using pci=biosirq Kernel: 3.6.1-xen self compiled (work perfect without xen multiboot) Xen Version: 4.2

Sorry for alI these individual emails, but I think is more readable this way, by having each independent information in a separate email. I also have these additional cards that I can try: Gefoce GT 1030 and Geforce GTX 1050 Ti. I have tried Geforce GT 1030 and it is working nicely but without hardware acceleration. Without the hardware acceleration I am able to get into X (Ubuntu Mate 17.10)

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD