search for: asuscom

I finally got my ASUSCOM (Cologne chip) ISDNLink card working here in the US. When a call arrives, I get "Unknown IE 42 (Unknown Information Element)" and "Unknown IE 21 (Unknown Information Element)". IE 21 (0x15) is defined as Q931_CALL_STATE_SUSPEND_REQUEST. IE 42 (0x2a) is not defined in the c...

Hi guys, I am trying to connect through an asuscom (56000) serial modem in CentOS5, but when tried Kppp tool it sais no device found. I can't see /dev/modem :( What could you suggest in this cases ? Thanks you in advance.

.... I'm thinking that, because it's not a smoothed signal, the analog-to-digital process injects hum and buz. Does _anyone_ have more information on this? In the meantime I've had an ISDN circuit installed so as to have digital all the way to the * box. However, I can't get the ASUSCOM ISDNLink card to work with ISDN4Linux :-( Cheers, Mike P.S. The woodpeckers are still eating my house. There is a nest is an exterior wall which is driving my cats nuts! -- Michael Welter Introspect Telephony Corp. Denver, Colorado +1 303 674 2575 mike@introspect.com www.introspect.com

...and to have VoIP telephony between the phones in the company, and if it's not "within the company" - to use ISDN lines to connect to "outsiders". I read something about a possibility to use ISDN modems for these things, but so far I had zero luck configuring this (I have ASUScom's PCI ISDN modem)... Any advices/links? Cheers, Vedran. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050814/f447be0a/attachment.htm

...ARCH=xen". The driver installs correctly, finds the cards, but when I issue the ztcfg command, the domain crashes immidiatly: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:0d.0 (0006 -> 0007) PCI: Obtained IRQ 11 for device 0000:00:0d.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08b2000 fifo 0xcf048000(0x3b292000) IRQ 11 HZ 100 zaphfc: Card 0 configured for TE mode PCI: Enabling device 0000:00:0e.0 (0006 -> 0007) PCI: Obtained IRQ 3 for device 0000:00:0e.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08be000 fifo 0xcf068000(0x3b272000)...

...nterface Registered on major 196 Dec 18 07:27:17 intechdial kernel: zaphfc: no version for "zt_receive" found: kernel tainted. Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5 Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xa168400 fifo 0x4fe8000(0x2fe8000) IRQ 5 HZ 1000 Dec 18 07:27:17 intechdial kernel: zaphfc: Card 0 configured for TE mode Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 10 (level, low) -> IRQ 10 Dec 18 07:27:17 intechdial kernel: zaphfc:...

The card is an ASUSCOM ISDNLink PCI (passive) and the circuit is from Qwest (in the US). I will be using this circuit only for voice (I'm doing this because of the poor quality of my POTS lines). I've compiled Hisax (as a module) into my 2.4.25 kernel, and with 'modprobe hisax type=35 protocol=4 id=hisax...

...g gives me the following: Zapata Telephony Interface Registered on major 196 zaphfc: no version for "zt_receive" found: kernel tainted. PCI: Enabling device 0000:00:0e.0 (0004 -> 0007) ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xe08c4000 fifo 0xd1da8000(0x11da8000) IRQ 11 HZ 1000 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci card(s) in this box. Registered tone zone 3 (Netherlands) stoibi*CLI> zap show channels Chan Extension Context Language MusicOnHold...

...versions i'm running: kernel-2.4.27 Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e zaptel modules 1.0.7 zaphfc is from bristuff-0.2.0-RC8e When I'm doing the insmod on zaptel, zaphfc, zaprtc: Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 12 for device 00:12.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc3840000 fifo 0xc2d58000(0x2d58000) IRQ 12 HZ 100 zaphfc: Card 0 configured for TE mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. Registered Span 2 ('ZTRTC/1') with 0 channels Re...

...ciop kernel: Zapata Telephony Interface Registered on major 196 Mar 8 17:56:06 ciop kernel: PCI: Enabling device 0000:00:06.0 (0000 -> 0003) Mar 8 17:56:06 ciop kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 169 Mar 8 17:56:06 ciop kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd081ff00 fifo 0xc6628000(0x6628000) IRQ 169 HZ 1000 Mar 8 17:56:06 ciop kernel: zaphfc: Card 0 configured for TE mode Mar 8 17:56:06 ciop kernel: zaphfc: 1 hfc-pci card(s) in this box. Mar 8 17:56:27 ciop kernel: zaphfc: stop Mar 8 17:56:27 ciop kernel: zaphfc: shutting...

...server kernel: zaphfc: freed one card. Aug 17 02:33:27 server kernel: PCI: Enabling device 00:12.0 (0000 -> 0003) Aug 17 02:33:27 server kernel: PCI: Found IRQ 10 for device 00:12.0 Aug 17 02:33:27 server kernel: PCI: Sharing IRQ 10 with 00:0e.0 Aug 17 02:33:27 server kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd898ff00 fifo 0xcd088000(0xd088000) IRQ 10 HZ 100 Aug 17 02:33:27 server kernel: zaphfc: Card 0 configured for NT mode Aug 17 02:33:27 server kernel: zaphfc: 1 hfc-pci card(s) in this box. Aug 17 02:33:27 server kernel: Registered tone zone 3 (Netherlands) Aug 17 02:33:27...

...t;>exten => 6,1,Dial(Zap/g1/4758645,60,r) >>--------- >> >> >>----- >>load modules >>----- >>zaptel: no version for "struct_module" found: kernel tainted. >>Zapata Telephony Interface Registered on major 196 >>zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc49b9e00 fifo >>0xc2678000(0x2678000) IRQ 9 HZ 1000 >>zaphfc: Card 0 configured for NT mode >>zaphfc: 1 hfc-pci card(s) in this box. >>Registered tone zone 3 (Netherlands) >>zaphfc: card 0 layer 1 state = G2 >>zaphfc: card 0 layer 1 stat...

...them too seriosly, it's just a test config with no actual usage. BIG TNX in advance for at least some help: zaptel.conf ----------- defaultzone=nl loadzone=nl span=1,1,3,ccs,ami bchan=1,2 dchan=3 syslog ------ PCI: Enabling device 00:0f.0 (0000 -> 0003) zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xca8fd000 fifo 0xc6348000(0x6348000) IRQ 11 HZ 100 zaphfc: Card 0 configured for NT mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. ztcfg -vv --------- SPAN 1: CCS/ AMI Build-out: 399-533...

...s: ----------------------------------------- /sbin/modprobe --ignore-install hfcpci protocol=0x2 layermask=0xf HFC card c0abe800 dch c0abe87c bch1 c0abea18 bch2 c0abebb4 mISDN: HFC-PCI driver Rev. 1.49 PCI: Enabling device 0000:00:01.0 (0000 -> 0003) mISDN: HFC-PCI card manufacturer: CCD/Billion/Asuscom card name: 2BD0 HFC-PCI: defined at mem 0xcd324000 fifo 0xc0650000(0x1a650000) IRQ 18 HZ 250 reset_hfcpci: entered HFC_PCI: resetting HFC ChipId(30) HFC-PCI status(2) before reset HFC-PCI status(2) after reset HFC-PCI status(2) after 50000us init_card: entered inithfcpci: entered HFC PCI: IRQ 18 co...

...zaphfc syslog says:<br> <br> <b>Dec&nbsp; 3 20:26:12 asterisk kernel: PCI: Enabling device 00:0a.0 (0000 -> 0003)<br> Dec&nbsp; 3 20:26:12 asterisk kernel: PCI: Found IRQ 9 for device 00:0a.0<br> Dec&nbsp; 3 20:26:12 asterisk kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc48dc000 fifo 0xc1aa8000(0x1aa8000) IRQ 9 HZ 100<br> Dec&nbsp; 3 20:26:12 asterisk kernel: zaphfc: Card 0 configured for NT mode<br> Dec&nbsp; 3 20:26:12 asterisk kernel: zaphfc: 1 hfc-pci card(s) in this box.<br> </b><br> looks good I...

...apata.conf http://marcopar.altervista.org/zaptel.conf in the system messages i'm getting this: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 185 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08eaf00 fifo 0xcf338000(0xf338000) IRQ 185 HZ 1000 zaphfc: Card 0 configured for TE mode zaphfc: 1 hfc-pci card(s) in this box. Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear chann...

...l loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3 dmesg snippet: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:0d.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd0864f00 fifo 0xca778000(0xa778000) IRQ 10 HZ 1000 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci card(s) in this box. Registered tone zone 3 (Netherlands) Any Ideas? TIA /ralph

Hello, I am trying to use a HFC-PCI (CCD/Billion/Asuscom 2BD0) card in TE mode to dial-in and out with ISDN. The problem is I can not get the card to dial out with a Zap channel. Dial-in is working. I am using bri-stuff 0.1.0-RC4 (but tried also RC3 and RC2k). I tried all combination of "immediate", "overlapdial", "pridialpla...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! After LOTS of research on this list and internet in general I managed to get an old Teles PCI card working with Asterisk throught ISDN4Linux. No echos, no delays, simply perfect -- electronic poetry ! :) eheheheheh I just didn't get it to work with CAPI and "chan_capi" but, since isdn4linux is doing such a good job, I'll

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,