search for: as5300

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone don...

Hi Now, my Cisco AS5300 sent call to my asterisk, but two problems: When i call the phone number, i have: [Oct 28 06:01:16] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension '0426000000' rejected because extension not found. [Oct 28 06:01:18] NOTICE[12813]: chan_sip.c:1816...

Is it possible to terminate calls via SIP on a Cisco AS5300? Did anyone do it? How? Do i need an special IOS version? Ive been trying to compile the OpenH323 channel for the last month, but errors still happens. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-user...

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that digium's g.729 is not...

Greetings, I am attempting to configure an AS5300 to provide a SIP based gateway to the PSTN from Asterisk. I have been unable to identify through the docs how specifically this should be configured in Asterisk and have not been able to get things working through trial and error. I am sure I am missing something fairly obvious here but any guidan...

Hello, I have a Cisco AS5300 connected to Asterisk (1.6.2.9) Between 15-16 minutes, the call is disconnected without reason. Here is what is displayed in the debug: Received an SDES from 10.4.0.10:17399 -- Got SIP response 420 "Bad Extension" back from 10.4.0.10 -- Stopped music on hold on SIP/as5300-1-000...

Hello, We are working on implementing a solution for a medium service provider. They were previously using a Cisco AS5300 gateway with some PRI trunks to receive modem calls, then route them out the Internet. The Telco they were buying the trunks to discovered this configuration and restricted them due to legal conventions, and stated that in order to continue doing this, they would have to talk SS7 directly. We are...

Guys. I need some advice on some h323 issues. I need to test connectivity from Asterisk to a Cisco AS5300 that has PSTN lines and to cisco 3600 voip routers. H323 needs to be used here but I was wondering if anybody has linked Asterisk to these Cisco routers before? Thank you for any pointers.

hi All Any body already setup asteriks call routing to Cisco AS5300 with SIP Server ? i need informations sample config for that, or can show how to route docs . thanks Dirgan --------------------------------- Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather -------------- next part -------------- An HTML attachment was...

All, I've found problems in my setup with the latest couple of revisions (1.135/1.136) of asterisk/channels/chan_sip.c In my setup I have a RH9 asterisk server, AS5300 (single E1 to PSTN) and a dozen 7940's, everything is in the same VLAN and only running SIP. Outbound calls work fine: 7940 -SIP-> Asterisk -SIP-> AS5300 But inbound calls fail, I see the initial INVITE from the AS5300 which is received by asterisk but not responded to and then the AS53...

Hi all, I realize this is OT. I just got a Cisco AS5300, and I need to configure it like such: Asterisk -----(H323/SIP)------> Cisco ----- (E1/PRI)------->Telco So calls originate from the Asterisk side (registered users on SIP or just ZAP phones), and they go out H323 or SIP to Cisco, where they go out PRI. I have the Asterisk side sorted :)...

I've previously been using G711alaw on both the AS5300 and the phones but feel the need for a less bandwidth hungry codec for those users that are connected behind ADSL and so was investigating G.729 but .. Firstly I found that on my AS5300 I have either G.729r8 or G.729br8 and on the 7940 phones I have G.729a, I'm not sure which interoperate the...

Hello all, I have a cisco AS5300 which is register with a gatekeeper and a Asterisk server also register with the gatekeeper. PSTN ---->AS5300 ---->Gatekeeper ---->Asterisk I set up a conference room on the Asterisk sever (Room No 1234). I try to call from PSTN to AS5300, The AS5300 will call the Asterisk server through...

Hello all, When I generate an out-going call from *, the DTMF detection is not working ? ASTERISK --> GW AS5300 --> PSTN But the DTMF is working correctly when it's an incoming call. PSTN - -> GW AS5300 - -> ASTERISK Well, I tried with the 3 dtmfmode of asterisk inband, rfc2833 and info, no way !!! Is it normal that asterisk try to setup the outgoing-call using ULAW ? if I disable ulaw the...

...to sell * to my boss as a replacement for some expensive/inflexible/closed-source software he's been using to provide residential dialtone with for a couple years now. Presently, we have: 1) a cluster of sun boxes running propriatary IP-PBX software 2) a cisco 3640 h323 gatekeeper 3) a cisco as5300 pstn gateway I'd like to use sip between an asterisk box and that as5300 (which right now is only speaking h323), and I'd like to be able to use sip, h323, mgcp, or skinny for residential customers. This ought to be no problem, right? I'm coming up with pretty much nil on documentati...

Hi to all! I have this config, PSTN <--> AS5300 <--> ASTERISK I am using the Cisco as5300 to receive incoming calls and routing them to Asterisk for IVR. When I ran asterisk this is what I get when calling the voicemail demo. *CLI> -- Executing Playback("SIP/-081058b8", "transfer|skip") in new stack -- E...

I have my server configured to send to send all PSTN traffic to my Cisco AS5300 gateway via SIP. I use the following line in the extensions.conf file to accomplish this: exten => _NXXNXXXXXX,1,Dial(SIP/1${EXTEN}@10.1.1.1,240,T) Unfortunately, when I removed the T from the end of the statement, the calls still complete, but they drop as soon as the called party answers the...

Hi I have finished the installation of my VoIP basic configuration ... Actually: - All calls from my E1 are received by a Cisco AS5300 and sent to my Asterisk (in G711 by SIP). - All user are connected by SIP to the Asterisk - All calls from User are sent by asterisk to the Cisco AS5300 Now, i want see if i can supply T38 Fax Gateway .... I am search to: - Cisco Receive all Fax, two poss: he detect automatiqueley a...

...used PRI, and also currently use asterisk with POTS service on an audiocodes gateway. We have a notion that we want to take on a new revenue stream, with our model being as such: 1) Convert one of our PRIs into a two way voice/data bundle. 2) Plug this PRI into a piece of equipment (AS5300?) which can terminate both PPP, *AND* feed our Asterisk system. We'd transfer our POTS service over to the PRI and pick up the SIP signaling there. 3) In the extended model, use this setup to resell VoIP to our business ISP clients. Has anyone out there done this? If so, is the AS5300...

Hi i'm trying to connect to the PSTN in the following way sip ATA -> * -> gnugk -> Cisco AS5300 -> PSTN I'm using asterisk CVS-HEAD-06/01/05-14:33:15 running over RH EL3 Asterisk-Oh323 0.7.2 pre1 Open H323 v1.13.5 pwlib v1.6.6 and I'm having a lot of trouble, gnugk and * both have public ips and are not behind any type of firewall, the sip ATA is behind a firewall and has a pri...