search for: anis

Hi, ? I run the program testcall with one E1, it works fine; I receive DNIS and ANI for making calls and answering calls. ? When I start the Asterisk I receive call from outside correctly including DNIS and ANI, and receive the following messages: ? Sep? 7 10:29:59 WARNING[12167]: Answer Call Sep? 7 10:29:59 WARNING[12167]: MFC/R2 UniCall/2 Call control(5) Sep? 7 10:29:59 WARNING[12167]: MFC/R2

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

Hi, I've finally got running Asterisk 1.2.14 with UniCall & MFC/R2 patches, I can generate calls and all seems OK but I cannot receive any call, this is what I get: MFC/R2 UniCall/3 <- 0001 [1/IDLE /Idle /Idle ] MFC/R2 UniCall/3 Detected MFC/R2 UniCall/3 Creating a new call with CRN 32769 MFC/R2 UniCall/3 1101 -> [2/DETECTED/Seize ack/Seize ack ]

Hi All, as good? I am trying to make a call for the Unicall channels and after the exchange of signalling and sending of the digits asterisk locks up with the sending of the signalling "E" and the TELCO says that asterisk would have to send signalling "F", as to make for asterisk to send signalling "F"? The TELCO says that the signalling "E" is

Hello All, I'm having problems with international calling via Global Crossing. I'm told I need to send a true ani versus a sudo ani. What is the difference and how can I configure asterisk to do this. Global Crossing is denying calls with sudo anis. Thanks, Keith

Has anyone in the UK got ANI to work on an inbound call ? Using asterisk 1.4 trunk and zaptel 1.4 trunk, with a Euro-ISDN 30 Julian ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email

Hello All. I'm using sangoma card A-101. tested successful with E10 (ACATEL) Exchange, connection with E1, CAS, (using unicall-0.0.3pre4). my system run success, incoming call and call out are good. when i switch to EWSD (SIEMENS) R-15 . my asterisk faill, cannot connect with EWSD. (E10 and EWSD exchange store in two provinces difference. in Vietnam) this is my logfile of E10

Hello All. I'm using sangoma card A-101. tested successful with E10 (ACATEL) Exchange, connection with E1, CAS, (using unicall-0.0.3pre4). my system run success, incoming call and call out are good. when i switch to EWSD (SIEMENS) R-15 . my asterisk faill, cannot connect with EWSD. (E10 and EWSD exchange store in two provinces difference. in Vietnam) this is my logfile of E10

Hello, We're having some issues with CallerID and I thought someone here might be able to shed some light as none of our carriers seem to know what I'm talking about. The issues is this: A client of ours uses an after-hours voicemail service as mandated by their corporate office. We have a Day/Night setting that lets them turn this on and off. A call comes in from one of their

Hi, The animation package 2.0-0 is on CRAN now. This version is a milestone of the animation package. It includes a new function saveHTML() which uses a much more elegant interface and is consistent in syntax with other save*() functions such as saveMovie(), saveSWF() and saveLatex(). Lots of demos have been added to demonstrate the flexibility of this package, e.g. now we can get the snapshots

Hi, The animation package 2.0-0 is on CRAN now. This version is a milestone of the animation package. It includes a new function saveHTML() which uses a much more elegant interface and is consistent in syntax with other save*() functions such as saveMovie(), saveSWF() and saveLatex(). Lots of demos have been added to demonstrate the flexibility of this package, e.g. now we can get the snapshots

Hi All, My research indicates ANI is not really supported with SIP Channels or passed between SIP servers, even with setting function CALLERID(ANI). So the only place this applies is on PRI interfaces, when sending calls out a ZAP PRI you can set the ANI to whatever and CID Number to a different whatever so on the other end of the PRI you will receive the two different values? Is this correct or

...rID on the PSTN. What's happening now is that this is working for Zap/ devices, but not for SIP/ devices because of the problem noted above. A workaround I could use would be to make a Macro that is something like this: [macro-ChangeCIDnum] exten => s,1,GotoIf(${ISNULL(${CALLERID(ANI)})}?:aniset) ; If ANI isn't set, then set it to the current CALLERID(num) before ; we change the CALLERID(num) exten => s,n,Set(CALLERID(ANI)=${CALLERID(num)}) ; Now change the CALLERID(num) exten => s,n(aniset),Set(CALLERID(num)=${ARG1}) exten => s,n,MacroExit and use this every time I would n...

I've got an interesting problem. I just recently upgraded an asterisk server from a may 9th cvs to a 9/29 cvs. When I did the upgrade I was unable to place calls through the PRI. The calls would process fine, but the provider would reject the call and send me a cause 69 or 77 failure code "Unallocated (unassigned) number". Upon contacting the provider, they told me I was

does anyone know how to route a call coming in with ANI*DNIS* Oct 31 12:47:41 VERBOSE[30056] logger.c: -- Executing Set("Zap/49-1", "DID=1231234*4812*") in new stack I tried making a route for _.*4812* but that matched everything rather then just the dnis i wanted.. any ideas? I would preferably like pass the callerid along to my extensions, but for now the important

I'm trying to get Jade Dynasty to work properly with Wine. Most of the bugs I've fixed or are to minor to worry about. There is one problem I can't seem to fix. Glows on weapons are bright white from most camera angles. It appears the glows are reflecting something, but I don't know what. Certain monsters glow white as well. The bug does not happen on the character select screen

Good Day list, Need assistance determining the best place to read up on whether Asterisk can help me out. I have a situation where I need to do the following <PRI from Telco> ------- <Analog Channel Bank>------------<Proprietary Box> | | | | | | <PRI Port 1 of Digium Quad T1> <PRI Port 2 of Digium Quad T1> | | | | | |

Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do

when i run: wine ./Civilization4.exe (in the correct dir) i get this output: ###################### fixme:system:SystemParametersInfoW Unimplemented action: 55 (SPI_SETMOUSEKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 59 (SPI_SETSTICKYKEYS) fixme:cursor:CURSORICON_CreateIconFromANI Loading all frames for .ani cursors not implemented. err:ole:CoGetClassObject class

Hello everybody, i'm from Mexico, at the time i?m working on a production server with asterisk 1.2.25 + spandsp-0.0.4 + libmfcr2-0.0.3+libsupertone-0.0.2+libunicall-0.0.3 and zaptel-1.2.22. I installed this version of astunicall that i downloaded from http://www.moythreads.com/astunicall/ Everything works fine, i'm able to make outgoing calls and recive incoming calls with all ANI and