search for: alarms

Hi everyone, I have a PRI conection on an * system running Asterisk 1.0.9, libpri 1.0.9 and zaptel 1.0.9.2 connected to an AXE 10 (APZ 21220 System 64) in the network side. I know the system and the wildcard I´m using are ok because I´ve used them before with other PRI connections (to a Siemens EWSD) without any problem. First the PRI didn´t work (I got the TE110P alarmed with red). After

Hello - I have a Premisys Slimline Channel Bank connected to a Digium TE110P. I am not able to call the FXS extensions or get dialtone on them. The channel bank is connected via a T1 crossover to the cable and lights show green. I really need to get this functioning by end of day. If anyone can help me out I would be greatly appreciative. Thanks, Dave zaptel.conf loadzone =

Asterisk is getting red alarms on my T1, sometimes once or twice a day, but today it happened 5 times. Even once is too many. Every call in progress is dropped. Please help! What do I need to do? What can I try? I've googled and searched this list and can't find anything. Here's an example from the logs: Feb...

Hi all, any body can tell me why i am receiving this message in my sever ? I have running * with 10 Digital Lines, but i am receiving a lot of times this message . Is a software issue or is a hardware issue ? Regards. Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event: Unicall/5 event Alarm Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event: Unicall/5 Alarm masks

Hi guys, I've been trying to get my ISDN-10 line up for the past few days, but its been going up and down. I am using OpenVox D110P card on asterisk version 1.4.21. It seems to me like a cable problem. I tried using Ethernet straight cable (12, 45, 36, 78) and also a "straight" cable where the twisted pairs are on 12, 34, 56 and 78. The problem remains the same.

Hi I have a Panasonic TDA600 conected with one E1 to the pstn and one PRI with my Asterisk using a Digium TE220B card. The Panasonic is master clock and Asterisk is slave, additionally the Panasonic takes the clock from the PSTN E1. This scheme works and I?m able to make and receive calls the problem is that some times the Asterisk lose the synchronism with the Panasonic and the log shows this

Hello All, I have got my TE110P working at the hardware level, turned out to be a dodgy cable causing the Yellow errors in zttool. However, now I am getting yellow errors in asterisk, but zttool shows nothing out of the ordinary. here is my current config, and some asterisk console errors, any suggestions most welcome. zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31

Hi, I have an IBM server running latest asterisk 1.4.x connected to a Siemens hi-path user a TE120P single-span. Approx every 8 hours (although not every 8 hours and sometimes 2 in a row) at exactly the same time I see the following errors Does anyone have any suggestions / ideas ? Thanks Ruairi Sep 24 11:56:30 asterisk01 -- MARK -- Sep 24 11:59:02 asterisk01 ntpd[3615]: synchronized to

...hink, is that your processor occasionally does not keep up with the frame transmitter on the PRI board - something that will happen from time to time, and asterisk should recover. (although, as previously discussed, asterisk's minimal error handling makes this worse than it should be) The red alarms indicate a loss of synchronisation, or a very high bit error rate. This is a basic problem and should not occur. Are you sure the switch is not shutting down the T1's as part of some housekeeping? Regards, Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, En...

My PRI is being reset at least once a day with the following errors in the logs. zaptel, zapata, libpri, and asterisk are from CVS this morning.. This has been happening for weeks on all versions (including -stable). the T100P card appears to NOT be sharing an IRQ. xenon# cat /proc/interupts CPU0 0: 1203977 XT-PIC timer 1: 3 XT-PIC keyboard 2:

Hi, we have a E1 pri from Citylink, (they are using Ericsson Engine exchange), that are restarting after 5 - 15 minutes, before and after that we can make calls in and out w/o problems. The cards have been tested in two computers (Atholon XP 2200+ and Celeron 2.6Ghz), are on there own IRQ, not showing any IRQ misses in zttool. It's all correctly configuered - zaptel and zapata (attached). We

Hello, About every 2 or 3 days I notice in the messages log file: Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 2: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 3: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 4: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 5: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk. Span 4 is not configured. Host sy...

Hi everyone, I have been having some problems lately with our PRI and Asterisk, or maybe it is just me. It happens once maybe twice a day, but when some of our customers are calling in, the phone just drops on them. I pulled the information below from the log from one that happened. I notice why it is happening, but I can't seem to figure out a way to stop it from happening. I also

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi. I'm getting the following error at random intervals on my TE410P with Asterisk CVS-03/30/04-11:49:01-CEST. I have two spans active, one connected to my Telco, the other to a Siemens PABX. Both spans display this behavior at random intervals. All calls are dropped when this happens. Spans are not necessarily in use when this happens.

...: warning: can't get client address: Bad file descriptor Feb 2 15:47:48 dunpbx vsftpd: warning: can't get client address: Bad file descriptor Setting to tcpwrapper=yes in the vsftpd.conf resolves this issue. I noticed that when I would see a slew of these messages, I would see random red alarms on my PBX: Feb 3 03:16:07 WARNING[1133718080]: Detected alarm on channel 2: Red Alarm Feb 3 03:16:09 NOTICE[1133718080]: Alarm cleared on channel 2 Feb 3 03:16:18 WARNING[1133718080]: Detected alarm on channel 2: Red Alarm Feb 3 03:16:30 NOTICE[1133718080]: Alarm cleared on channel 2 Feb 3 04...

Hello, I am missing any description of zaptel/DAHDI alarms. The TE200 series user manual contains only a description of LEDs states. These alarms states are visible in zttool/dahditool or in astersick CLI (zap show status) and I wonder what is the real meaning of these alarms for E1 channel. Possible alarm states (based on zaptel.h 1.2): 1. No alarms 2....

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

...-----------> Sip Phone<br> <br> When i make a call from Telco Phone to Sip Phone, the call complete, but when i disconnect the link and reconnect in few seconds, the Asterisk clear call:<br> <br> <b>[Apr&nbsp; 3 10:44:40] WARNING[13081]: chan_dahdi.c:4385 handle_alarms: Detected alarm on channel 1: Red Alarm<br> [Apr&nbsp; 3 10:44:40] NOTICE[21088]: chan_dahdi.c:9558 pri_dchannel: PRI got event: Alarm (4) on Primary D-channel of span 1</b><br> &nbsp; <b>== Spawn extension (disc-from-trunk-TR001, 9800, 2) exited non-zero on 'DAH...

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'