search for: afther

On 2018-11-16 07:24, Adrian Minta wrote: > Yes, multiple imap servers using one shared nfs storage. With the same > config on 2.2.13 the public interface traffic was similar to the > storage interface, around 100 mbps. > > After we switch to 2.2.27 the storage interface traffic jumped 10 > times while the public interface stayed the same. This make us > thinking that

Yes, multiple imap servers using one shared nfs storage. With the same config on 2.2.13 the public interface traffic was similar to the storage interface, around 100 mbps. After we switch to 2.2.27 the storage interface traffic jumped 10 times while the public interface stayed the same. This make us thinking that something is wrong and each time a user logs in the whole Inbox content is read

It should eventually wind down once all the problems are fixed. Of course if it does not happen, you can always run force-resync for the problem users. Aki On 14.11.2018 10.08, Adrian M wrote: > Hi, > we upgraded our servers from version 2.2.13 to 2.2.27. After the > upgrade we notice a 10x increase in traffic with the nfs storage an > errors like this in the logfile: > > Nov

You should review https://wiki2.dovecot.org/NFS to see that the settings make sense. Aki On 14.11.2018 12.00, Adrian M wrote: > Thank you ! > I was little concerned that the following settings are not in line > with the new version: > > mail_nfs_index = yes > mail_nfs_storage = yes > mail_fsync = always > mailbox_list_index = yes > maildir_stat_dirs = yes >

Are you connecting to the same mailbox over NFS from multiple IMAP servers? If not and, at any given time, any mailbox will be accessed from a single NFS client, try to "dupe" Dovecot into thinking it's not using NFS. We're running quite successfully such setup with NFSv3 over TCP, which turned out to be the fastest and most reliable throughout the years. Here are the mount

Hi, I'm just trying to install the DPMA on my Asterisk. I already made the upgrade from Asterisk 1.8.5 to Asterisk 1.8.11-cert2. This is what i did: *mv /usr/lib/asterisk/modules /usr/lib/asterisk/modules-185 * *compiling Asterisk-Cert2 1.8.11* *./configure make make install make config * Afther that i register the DPMA license, and finally copied the * res_digium_phone.so* to */usr/lib/asterisk/modules * When i try to load the module on asterisk console this is what i get> **CLI> module load res_digium_phone.so Unable to load module res_digium_phone.so Command 'module load res...

Thanks, they are as in example, except for "mailbox_list_index = yes" witch is from https://wiki.dovecot.org/PerformanceTuning On Wed, Nov 14, 2018 at 12:18 PM Aki Tuomi <aki.tuomi at open-xchange.com> wrote: > You should review https://wiki2.dovecot.org/NFS to see that the settings > make sense. > > Aki > On 14.11.2018 12.00, Adrian M wrote: > > Thank you !

Hi, we upgraded our servers from version 2.2.13 to 2.2.27. After the upgrade we notice a 10x increase in traffic with the nfs storage an errors like this in the logfile: Nov 12 09:48:16 mail dovecot: imap(...): Error: Corrupted index cache file /.../dovecot.index.cache: invalid record size Nov 12 09:48:16 mail dovecot: imap(...): Error: unlink(/.../dovecot.index.cache) failed: No such file or

...laptop. I upgraded from centos 5.2 to 5.3. I have something strange, my auto update is not running any more, if I start the update process manually and it is working. If i do a clean install of centos 5.3 on a pc or laptop it is working. My question is why is the auto update not running any more afther the update process. Met vriendelijke groet/With kind regards, Rob Morrien EDS, an HP company ABN AMRO account IE NL Gondel 1 1186 MJ Amstelveen The Netherlands Tel: +31 887 503052 Mobile: +31 6 51300616 E-mail: rob.morrien at eds.com -->>> ( On Friday i am not in the office ) &l...

Thank you ! I was little concerned that the following settings are not in line with the new version: mail_nfs_index = yes mail_nfs_storage = yes mail_fsync = always mailbox_list_index = yes maildir_stat_dirs = yes mmap_disable = yes On Wed, Nov 14, 2018 at 10:19 AM Aki Tuomi <aki.tuomi at open-xchange.com> wrote: > It should eventually wind down once all the problems are fixed. Of

...a softphone with a Grandstream I can pich up the call with the softphone but the Grandstream keeps ringing like on the other site you didn't pick up the phone.(even if you do so) It's the same when I call between two Grandstream phone's. Call from phone1 to phone 2, I pick up phone2 and afther 3 seconds I get congestion tone from both phone's. Info from command *CLI> -- Executing Dial("SIP/phone2-a030a", "sip/phone1") in new stack -- Called phone1 -- SIP/phone1-663a is ringing -- SIP/phone1-663a answered SIP/phone2-a030a -- Attempting native bridge of SIP/phon...

Question 1: Is there a way to keep an authentication to a Samba share from lasting indefinitely? I am implementing a Linux file server for a network of machines all running Windows 98 SE. (Redhat 9, Samba 2.2.7a, share-level security.) Once a user provides a valid password and connects to a Samba share, Samba allows that client machine to access that share indefinitely. In our office each

Hi all, I am attempting to build samba3 beta2 for AD support, and I've run into a brick wall. I am using Solaris 2.7 and 2.9, with gcc 2.95.2, with krb5-1.2.8 and (now) libiconv-1.9.1 Firstly, I am getting errors of the like: Error loading module '/usr/local/samba/lib/charset/CP850.so': ld.so.1: ./smbclient: fatal: /usr/local/samba/lib/charset/CP850.so: open failed: No such file or

This is not WINE, but more xinit question, so I am sorry if anyone is offended. I searched for two days for an answer that works for me , and did not get any answer in Ubuntu forums.I ask this question here, because it seems a lot of people run their win games in separate windows, so I hope on who knows might be willing to help. My problem Every game I run starts and works OK in a separate

I have successfully, by now, installed a samba server. I can log on from win98 and 95 computers. I can see the shares and use some of it. There are a couple of shares [Home] [Document] I can browse the share and a user, "Mats", can read and write copy and so on in /home/Mats, so obviously the server recognizes the user as the Linux user with the same name. (in smbusers there is a

Hello, I'm trying to get Samba installed on my PowerPC G3. I have downloaded Samba2.2.8a and 3.0.0beta2 but the same problem persists. Once I uncompress the tar file, then try to run the ./configure command, It wont configure and fail. The error message goes something like this: ===================================================== ./configure Checking for gcc... no Checking for cc ...

Hi, Am I correct in this.. I want to setup IPTABLES to protect my * box.. The default rtp.conf defines that * will use ports 10000 to 20000.. IAX listens on 5036.. SIP listens on 5060.. I am assuming all ports used by * are UDP.. So I am planning on setting my server to block all inbound traffic except UDP ports 5060, 5036 and 10000-20000.. Am I leaving anything out?? Thanks.. --

...gt; i read your problem and i suggest you to verify user , owner and group chmod > on directory with docs and on user that modified this word file. > When you create new file word saves ~.tmp on your local harddisk temp > directory and saves it to share with save command and new name. > Afther when you edit then ~... file is created on share but samba can > vetoing ~ char in name by settings veto or bad codepage. > Check your vetofiles settings on samba. > Bye. > > ----- Original Message ----- > From: "John H Terpstra" <jht@samba.org> > To: "Ed...

...ed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for provider''s network. Afther the mark i send the packets to the followind classes: script for eth0 (eth0 is my local network) #!/bin/bash tc qdisc del dev eth0 root >/dev/null tc qdisc add dev eth0 root handle 1: htb default 3 tc class add dev eth0 parent 1: classid 1:1 htb rate 64kbit ceil 256kbit burst 15k quantum...

...irewall rc: Starting squid: succeeded gen 2 14:12:32 firewall xfs: Avvio xfs succeeded gen 2 14:12:33 firewall smb: Avvio smbd succeeded gen 2 14:12:33 firewall smb: Avvio nmbd succeeded gen 2 14:12:33 firewall anacron: Avvio anacron succeeded gen 2 14:12:34 firewall atd: Avvio atd succeeded afther the boot .... [root@firewall log]# lsmod Module Size Used by Not tainted autofs 13348 0 (autoclean) (unused) ipt_TOS 1688 12 (autoclean) ipt_MASQUERADE 2232 1 (autoclean) ipt_REDIRECT 1400 1 (autoclean) ipt_unclean...