search for: aftermarket

Apologies for the empty subject: attempting to fix that

The battery was replaced in December and the output from upsc was: $ upsc desktop_ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1020 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS CP850AVRLCD device.type: ups driver.name: usbhid-ups

Centos continues to fall behind in with the state of bluetooth development. Nothing new from 5.1 to 5.2. Has anyone got a more recent version working and have compile and rpm build instructions? Here are the rpms that I have: bluez-gnome-0.5-5.fc6.i386.rpm bluez-hcidump-1.32-1.i386.rpm bluez-libs-3.7-1.i386.rpm bluez-utils-3.7-2.el5.centos.i386.rpm bluez-utils-cups-3.7-2.el5.centos.i386.rpm

...tery.runtime: >> ups.load: >> >> Is the battery dead again? >> Do I need a new UPS? > > Compare the upsc output with the screen/led display on the UPS.  If they > are in agreement, then there is no problem with NUT.  Your issue is > with the UPS or the battery.  Aftermarket batteries can be .. > substandard.  We bought one in 2018 that turned out to be manufactured > in 2012. > Now it says: battery.runtime: 1170 The display on the UPS fluctuates between 16-19 minutes. ups.load says 30 constantly and The display on the UPS says 30% so I think that is correc...

...wrote: > These changed: > battery.runtime: > ups.load: > > Is the battery dead again? > Do I need a new UPS? Compare the upsc output with the screen/led display on the UPS. If they are in agreement, then there is no problem with NUT. Your issue is with the UPS or the battery. Aftermarket batteries can be .. substandard. We bought one in 2018 that turned out to be manufactured in 2012. -- Stuart D. Gathman <stuart at gathman.org> "Confutatis maledictis, flamis acribus addictis" - background song for a Microsoft sponsored "Where do you want to go from...

...ils. I've tried one suggestion, adding a nopat to the kernel invocation, but that hasn't helpd although I'm sure the full suggestion, which I can no longer find, also mentioned an "mtrr" addition as well. I'm also sure believe I even saw someone get pointed to some "aftermarket" xorg-x11 RPMs that claimed to work better with the Xen4CentOS environment than the standard ones. My ability to search the interweb thing and find this info has clearly fallen to an all time low, so, does anyone on here have a better memory than I do, as regards that stuff ? (Assuming i didn...

...s the ones I would recommend - so far I didn't see HP printers broken, or out of supplies which are not manufactured anymore (stay away from Xerox in any event: I had to throw away several color laser Xerox printers because Xerox stopped making toners for them, and Xerox did all to thwart "aftermarket" compatible supplies). The only disadvantage of laser printer compared to ink is if you need to print high quality photographs: ink of different colors blends, whereas powder in laser printer doesn't. But all on all if you are not picky, photographs printed on laser printers look great to...

I've got a remote system where I think I need to replace the CPU fan. in the output of dmidecode, I get... Processor Information Socket Designation: CPU 1 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: Intel ID: 47 0F 00 00 FF FB EB BF Version: Intel(R) Pentium(R) D CPU 2.66GHz

...cables are also useful, though low-speed USB 1.1 is pretty resilient to noise. > > Also, if you can fix it without rebooting the PC, the issue is probably external to the PC. > I will try it with a USB hub. Unfortunately I don't have a shorter cable currently. The one I am using is an aftermarket generic 1m USB 2.0 cable purchased from a local office supply store (Office Works) since the UPS did not come with a cable :-( This cable appears to be good quality as it is rather thick. > > Did you have a chance to check the NUT archives? I vaguely remember some motherboard-specific thread...

...t 1. First we need to know what type of graphics card you have. Please do the following at the command window. To get to the command window do the following [root at nVidia ~]#lspci -v "note the difference in board manufactures." These drivers will work on all Aftermarket cards as long as it has an nVidia Chipset. 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA]) Subsystem: Chaintech Computer Co. Ltd Unknown device 1420 Flags: bus master, 66MHz, medium devsel, laten...

...rdware and PSTN hookup will probably do for the echo problems. I'm not sure if you mentioned (lost in the past history of your post now) what sort of hardware you're using for PSTN connection now- TDMs, X100s, ATA's, etc- but that could also be a potential cause. I've heard tell of aftermarket X100s and certain ATA's being very finicky with echo- and age of hardware can sometimes make a difference. I personally use and recommend the Cisco handsets- it's hard (IMHO) to get echo generated there. Adjusting the gains, as you've already done, is generally step two, and should be...

Does anyone have information on support for Intel D965-based motherboards for CentOS 4 (i386)? I've got a DG965RYCK that fails a CentOS 4.4 install early on (problems scanning the PCI bus). Fedora Core 6 installs just fine. If anyone has any information, or magic boot parameters to try, please let me know. ("Works for me" is OK too). Thanks much. Dave Thompson UW-Madison

On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > I have tried to plug it into every USB port (including the USB 3.0 > ones) and I still get these errors. I discovered that power cycling > the UPS will fix it for a while, and also unplugging and replugging > the USB cable will also fix it sometimes. Error -32 is EPIPE, which means that the PC

...te memory bandwidth. In my testing a T4-1 can compete with a 12-core E-5 box on I/O and memory bandwidth, and this thing is about 5 times bigger than the T4-1. It should have at least 10 PCIe''s and will take 32 DIMMs minimum, maybe 64. And is likely to cost you less than $50K with aftermarket RAM. -- Trey On Mar 15, 2013, at 10:35 PM, Marion Hakanson <hakansom@ohsu.edu> wrote: >>> Ray said: >>>> Using a Dell R720 head unit, plus a bunch of Dell MD1200 JBODs dual pathed >>>> to a couple of LSI SAS switches. >> Marion said: >>> How...

Hello, nut recently told me that the batteries need replacing in my Eaton 5PX2200RT (ups) and 5PXEBM48RT (external battery pack). According to my notes, it has been just over 4 years since I installed them. Looking at on-line sales, these seem to use batteries in a pre-packaged plastic shell. I don't recall if that's what's in my units or not. Do you have any experience with

...er that's been online continuous for 6 months with no reboot. It stays at less than 7% useage no matter what it is doing and always gives back every ounce of the Ram after a task. It's running on a crappy 400 AMD Processor, has only 512meg of Ram and handles over 2000 Email Accounts on an aftermarket Email Server. (only an idiot uses Microsludges SMTP/POP Server). It's not broke and I don't fix it. Anytime you fiddle with any machine, it's going to need to be rebooted. And this includes Windows and Linux both. Anyone not being able to setup a decent Windows Server needs to run...

Hi, I recently purchased a new Easton 5E UPS. I plugged the USB cable into my computer so I could use the NUT UPS tools. However every so often NUT fails to connect to the device after a boot. Looking at dmesg I see errors like this: [ 3.277075] usb 1-9: new low-speed USB device number 6 using xhci_hcd [ 3.302091] usb 1-9: device descriptor read/8, error -32 [ 3.430241] usb 1-9: device

Hi, Short version: Is it possible to enable *all* builtins architectures? How? Longer explanation: I don't quite understand how compiler-rt targets are decided to be built while invoking cmake from the LLVM tree. I tend to believe that builtins and sanitizers (the two big parts in compiler-rt) are quite different monsters, but however they share the same build decisions and (if I'm not

I have a hp photosmart C3180 all-in-one and am well and truly sick of it. It seems like every time I go on another printing binge, I need yet another print cartridge. hp-clean doesn't help. IIRC this use it or lose it "feature" is common to inkjets. What should I replace it with? If I want a non-cloggging printer, is laser jet the way I need to go? I'd like to do color

This is off-topic, mostly, but I figure you guys will have some knowledge in this sound-quality-related area. I'm sitting here looking at the most recent "Musician's Friend" at headphones and thinking about getting a pair. They've got products from AKG, Fostex, Audio Technica, Nady, Sennheiser, and Sony, at price points ranging from $16 to $130 (list prices $20 to