Displaying 5 results from an estimated 5 matches for "achmatowicz".
2019 Dec 03
1
Re: What's the best way to make use of VLAN interfaces with VMs?
...onfirm
what I had seen and found that it works in one direction but not the
other: i.e. from 192.168.0.110 to 192.168.0.120, but not the other way
around.
Must be something with my configuration....which I can follow up on.
So, thanks again for your help.
Richard
On 12/3/19 11:36 AM, Richard Achmatowicz wrote:
> Laine
>
> I made the change and I can now ping across both bridges: br1
> (192.168.0.0/24) and br1600 (192.168.1.0/24):
>
> br1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 192.168.0.110 netmask 255.255.255.0 broadcast
> 192.168.0.2...
2019 Nov 29
2
Re: What's the best way to make use of VLAN interfaces with VMs?
Hi Laine
What you have suggested sounds eminently reasonable. Thanks for your
advice. I'm going to give it a shot and report back.
Richard
On 11/27/19 1:38 PM, Laine Stump wrote:
> On 11/26/19 11:07 PM, Richard Achmatowicz wrote:
>> Hello
>>
>> I have a problem with attaching VMs to a VLAN interface.
>>
>> Here is my setup: I have several physical hosts connected by a
>> physical switch. Each host has two NICs leading to the switch, which
>> have been combined into a team,...
2019 Dec 03
0
Re: What's the best way to make use of VLAN interfaces with VMs?
...68.0.120
// NO PACKET APPEARS HERE :-(
It's puzzling that the packet is seen to arrive on clusterdev02 but is
not received by the test app. It's also odd to see IGMPv3 messages on
the receiver and IGMPv2 messages on the sender.
Investigating ....
Richard
On 11/29/19 12:15 PM, Richard Achmatowicz wrote:
> Hi Laine
>
> What you have suggested sounds eminently reasonable. Thanks for your
> advice. I'm going to give it a shot and report back.
>
> Richard
>
> On 11/27/19 1:38 PM, Laine Stump wrote:
>> On 11/26/19 11:07 PM, Richard Achmatowicz wrote:
>>&g...
2019 Nov 27
2
What's the best way to make use of VLAN interfaces with VMs?
Hello
I have a problem with attaching VMs to a VLAN interface.
Here is my setup: I have several physical hosts connected by a physical
switch. Each host has two NICs leading to the switch, which have been
combined into a team, team0. Each host a has a bridge br1, which has
team0 as a slave. So communication between hosts is based on the IP
address of bridge br1 on each host.
Up until
2019 Nov 27
0
Re: What's the best way to make use of VLAN interfaces with VMs?
On 11/26/19 11:07 PM, Richard Achmatowicz wrote:
> Hello
>
> I have a problem with attaching VMs to a VLAN interface.
>
> Here is my setup: I have several physical hosts connected by a physical
> switch. Each host has two NICs leading to the switch, which have been
> combined into a team, team0. Each host a has a...