search for: a500

...ers (I googled around already) are welcome... My system to fit this card into, is FreePBX Distro with Asterisk 11, already running with incoming SIP trunk(s); I wish to extend it to accept incoming 'landline' ISDN BRI (6 channels / 3 ports). So far the interesting option(s) were Sangoma A500 and Digium B410P... (the appliance is adopted from an old desktop that still only ever has PCI2.0 slots, no PCIE) (there are also OpenVOX's cards, although their installation guide is somewhat, well... in the old kernel era...) Anyone who use(d) any of the above, not necessarily on a FreePBX...

I'm trying to get my Sangoma B600 working with Asterisk 1.6.1 and DAHDI 2.2. I've tried running ./Setup dahdi (and with --64-bit_4GB flag, running amd64) and the compile fails with this for many versions of the driver (incl. 3.3.16, 3.3.16.22, and 3.4.1): Building modules, stage 2. MODPOST 1 modules CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M]

Hello, there has been a post to this list somewhere arount april which said that it is possible to use a Sangoma BRI A500 card with zaptel and asterisk bristuff. That is, without sangoma_brid and sangoma_mgd daemons and without woomera channels. Could anybody give me a short hint how to configure this? I tried wanpipe-driver + zaptel + asterisk-bristuffed, but I couldn't get zaptel to recognize the sangoma chann...

Hi all Hi,I'm facing a strange issue where by SANGOMA not detected by goautodial system , Thats the problem : Configuring ISDN BRI cards [A500/B700] ------------------------------------ No Sangoma ISDN BRI cards detected Press any key to continue: ------------------------------------ Configuring GSM cards [W400] ------------------------------------ No Sangoma GSM cards detected regards -------------- next part -------------- An HTML...

...> My system to fit this card into, is FreePBX Distro with Asterisk 11, >> already running with incoming SIP trunk(s); >> I wish to extend it to accept incoming 'landline' ISDN BRI (6 channels / >> 3 ports). >> >> So far the interesting option(s) were Sangoma A500 and Digium B410P... >> (the appliance is adopted from an old desktop that still only ever has >> PCI2.0 slots, >> no PCIE) >> > > I would suggest to also consider Digium Hx8 boards which exist in PCI > format. > > > [1] http://www.digium.com/en/products/te...

http://bugzilla.mindrot.org/show_bug.cgi?id=1080 Summary: 4.1p1 to 4.2p1 broke UsePrivilegeSeparation on HPUX Product: Portable OpenSSH Version: 4.2p1 Platform: HPPA OS/Version: HP-UX Status: NEW Severity: security Priority: P2 Component: sshd AssignedTo: bitbucket at mindrot.org

Hi, I'm in the process of setting up Asterisk in a SOHO environment using ISDN for trunking. More specifically a BRI 2B+D circuit where one SPID is used for the business and the other is used for personal. The circuit already exists, but is presently being interfaced to POTS phones via a TA. This configuration is not very common in the US, but we are fortunate that our LEC offers it price

...are welcome... > > My system to fit this card into, is FreePBX Distro with Asterisk 11, > already running with incoming SIP trunk(s); > I wish to extend it to accept incoming 'landline' ISDN BRI (6 channels / 3 > ports). > > So far the interesting option(s) were Sangoma A500 and Digium B410P... > (the appliance is adopted from an old desktop that still only ever has > PCI2.0 slots, > no PCIE) > I would suggest to also consider Digium Hx8 boards which exist in PCI format. [1] http://www.digium.com/en/products/telephony-cards/hybrid/h8 (there are also Op...

...are welcome... > > My system to fit this card into, is FreePBX Distro with Asterisk 11, > already running with incoming SIP trunk(s); > I wish to extend it to accept incoming 'landline' ISDN BRI (6 channels / 3 ports). > > So far the interesting option(s) were Sangoma A500 and Digium B410P... > (the appliance is adopted from an old desktop that still only ever has PCI2.0 slots, > no PCIE) > (there are also OpenVOX's cards, although their installation guide is somewhat, well... > in the old kernel era...) > > Anyone who use(d) any of the above,...

Hi, folks! Sangoma has an informal user survey up on their home page (at http://www.sangoma.com) asking if people would use their A500 card for North American BRI, if it were supported. I encourage anyone with an interest in voice BRI in North America to vote; this information will be used for deciding whether to make the investment in developing a National ISDN driver layer for it. Benefits to users of BRI include the vastly bet...

Hello, Junghanns and BeroNet offer 8 BRI ports cards. Do you know if Digium's B410P has an inner TDM bus so that an 8 BRI ports subsystem (2 PCI slots used, but 1 one set of interrupts) could be made out of 2 B410P ? I know you could (theorically) do this with Junghanns and BeroNet cards. Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, when I receive a call from ISDN BRI (with a Sangoma A500) and I try to playback something I get the following error: **[WOOMERA]** HW DTMF supported s1c1- -- Executing [number at from-pstn:1] Answer("WOOMERA/g1/1-7b29", "") in new stack **[WOOMERA]** +++ANSWER WOOMERA/g1/1-7b29 -- Executing [number at from-pstn:2] Playback(&qu...

I hacked out a rough first implementation of parisc64 for klibc last month, and only just got around to testing it now. The good news, it compiled fine on the first shot. The bad news, it failed to link usr/klibc/libc.so, and I'm not clueful enough to know why. hppa64-linux-gnu-ld -Ttext 0x40001000 -o usr/klibc/libc.so --start-group [...] usr/klibc/socketcalls/recvmsg.o

Hello all What I'm looking for is some plain speaking advice on ISDN. Currently using 4 analog lines connecting via a four port TDM400P FXO card. We need to physically move our installations, and on requesting the analog lines be moved - our telco (BT) is suggesting we replace our analog lines with ISDN2. We would have 3 x ISDN2 connections, giving us six voice channels. They've

...: pam args: * userdb: driver: passwd Here is an excerpt from mail.log: postfix/smtpd[4117]: connect from localhost[127.0.0.1] postfix/smtpd[4117]: 163E1CA2675: client=localhost[127.0.0.1] postfix/cleanup[4120]: 163E1CA2675: message-id=<27002A3F-AF44-410D-A500-368D04F5FA9A at almbp.local > postfix/qmgr[3232]: 163E1CA2675: from=<testuser at almbp.local>, size=2650, nrcpt=1 (queue active) dovecot[4129]: deliver(www): mail_location: mbox: mkdir(/Library/ WebServer/_mailboxes) failed: Permission denied (euid=70(_www) egid=70(_www) m...

Hi, folks: I remain intrigued by the gap in BRI implementation between North America and Europe, and I wanted to get feedback from the list members on the matter. I'm seriously considering making the leap in our office. In Europe, the idea that an office that does not have enough lines to justify PRI would use analog lines is perceived as technologically backwards, and yet that's what

...ev=0x7441, revid=0x04 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x1022, dev=0x7443, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1044, dev=0xa500, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=2 secondarybus=2 found-> vendor=0x1044, dev=0xa501, revid=0x01 class=0e-00-01, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base c0000000, size 28 found-> vendor=0x102...

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it would