search for: _alert_info

...s in, and a normal ring when an extension is dialed directly. When a customer service call is transferred, I want to ring to revert back to normal. In the local extension macro, I have the following ; make sure ring is set to default exten => s,n,NoOp(${ALERT_INFO}) exten => s,n,NoOp(${_ALERT_INFO}) exten => s,n,SetVar(ALERT_INFO=) exten => s,n,SetVar(_ALERT_INFO=) exten => s,n,NoOp(${ALERT_INFO}) exten => s,n,NoOp(${_ALERT_INFO}) When a call is transferred, here's what I see on the console -- Executing NoOp("Zap/1-1", "Bellcore-r3") in new stack -...

...sk 1.2 to 1.4 and am having trouble with with one of my ATAs not ringing. Basically, when I execute the Dial command, an error occurs: "Got SIP response 400 "In alert-info header: Empty value expected" Now in 1.2, I just issued the following command to overcome this problem: Set(_ALERT_INFO=). Now in 1.4, _ALERT_INFO is deprecated, so I have to use SIPAddHeader, but I don't know how, or if there is a way to remove the alert-info header. Here is my dialplan snippet: exten => s,9,Playback(my-greeting) exten => s,10,Wait(1) exten => s,11,SIPAddHeader(Alert-Info: info=bel...

Hi All, I am running into a problem setting the ringtones via _ALERT_INFO on the Cisco 7960 phone. I am using * 1.2.1 and have tried setting the variable to several values. I have also tried setting the phone's software to both 7.5 and 8.2 thinking that it might be a version issue, but with no success. I have examined the packets and do see the ALERT_INFO head...

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans" voIpProt.SIP.alertInfo.1.class=&quot...

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

...gh of them. > > Is there a way to get Asterisk to tell the IP501 to use a different ring, put > something up on the display, *something* on a dynamic basis? The wiki > doesn't seem to have a lot of information about this kind of thing. In your dialplan, you'll need to set the _ALERT_INFO variable to whatever you'd like your ring to be. Your choices are in sip.cfg in two places: Right at the beginning, you'll see a line like this: <alertInfo voIpProt.SIP.alertInfo.1.value="" voIpProt.SIP.alertInfo.1.class=""/> And then later on, you'll see...

Hello, I have uploaded a custom ringtone to our SPA-922's for the purpose of sounding like a door bell chime when the doorbell is pressed. I am using __alert_info to set this ringtone. It appears that I can only set the ringtone via alert_info for the ringtones that come from Linksys. Has anyone else seen this issue? I am doing the following: exten => 100,1,SetVar(_ALERT_INFO=doorbell) exten => 100,2,Dial(SIP/123) If I change _ALERT_INFO to one of th...

...wants to reach a phone on another, we use DUNDi to discover the destination pbx and IAX to transfer the call to the other Asterisk box. This seems to be a fairly common practice amongst Asterisk users, yes? Well, what about setting variables before call placement? Say you want to set the variable _ALERT_INFO, to have Polycom phones auto answer? Essentially the problem is that channel variables (with the exception of caller id) are not passed from one Asterisk box to another with IAX. How have people gotten around this? Doug.

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

...tual channel (in my case a SIP phone) that an agent is logged in at. Please can someone give me a pointer in the right direction ;) Thanx! Probably best illustrated in an example: Below works great and tells SIP/123 to pick up the call from asterisk then it dials the desired extension: SetVar: _alert_info=auto_answer Channel: SIP/123 Context: autodial Exten: 123456789 Priority: 1 Below doesn't pass alert_info to the sip phone the agent is logged in at, so the agent has to answer the call before the destination extension is dialed: SetVar: _alert_info=auto_answer Channel: AGENT/1001 Context: a...

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

...again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But it doesn't give me the ring I want on the phone. I have firmware BS4.63 and BS4.77 on the phones and it doesn't seem to work on either. Any suggestions? Thanks, Lyle

...NING[29209]: ast_expr2.y:901 op_div: non-numeric argument -- Executing [s at macro-page:2] GotoIf("Local/7299 at page-9da0,2", "0?fail:autoanswer") in new stack -- Goto (macro-page,s,3) -- Executing [s at macro-page:3] Set("Local/7299 at page-9da0,2", "_ALERT_INFO="RA"") in new stack -- Executing [s at macro-page:4] SIPAddHeader("Local/7299 at page-9da0,2", "Call-Info: <sip:XXX.XXX.XXX.XXX>;answer-after=0") in new stack -- Executing [s at macro-page:5] NoOp("Local/7299 at page-9da0,2", "") i...

Hi, I'm having trouble setting the ringtone on my Polycom 501. The relevant entry in extensions.conf is: exten => 801,hint,SIP/creative1 exten => 801,1,SetVar(ALERT_INFO="Test") exten => 801,2,Dial(SIP/creative1,20,Ttr) In the sip.cfg: <alertInfo voIpProt.SIP.alertInfo.1.value="Test" voIpProt.SIP.alertInfo.1.class="13"/> and <TEST

Anyone having any problems with CVS-HEAD-12/24/04-15:59:15 and ALERT_INFO I have a system setup with polycom phones configured to auto answer on internal calls. When we upgraded to the latest CVS the auto answer stopped working. My dialplan has not changed. I did a sip debug and I dont see the alert-info tag in any of the sip traces. Any help would be appreciated. Thanks John Bittner Simlab.net

I've just started using AMP and found that I have a problem with escaped characters in config files. In particular, I have a custom config item that needs a semicolon in... SetVar(_ALERT_INFO=info=auto-answer;delay=1) To get the part of the line after the ; to be accepted by Asterisk as a non-comment it needs to be escaped with a backslash, but I have found that I need to put two backslashes in to get this through AMP. Subsequent to this, when AMP displays the page it has stripped o...

I recently posted a question RE the Sipura 941 and using different ring tones, Thanks to hads I managed to use SET(_ALERT_INFO=Classic-1) to achieve this but trying this on the GXP 2000's didn't seem to do the trick?? Has anyone one had any luck on this topic? Also haven't been able to find any info on an auto-answer for the GXP 2000, again, I have succeeded in doing so with the SPA 941's but no luck wi...

...in SIP mode. Per the phones documentation they honor SIP distinctive ring tones. I am able to send the correct ALERT_INFO message in an invite from Asterisk to the phone, but I don't know what ring tone to call. From the reading I've done the syntax is: [3155791234] exten => s,1,Set(_ALERT_INFO=Ring 8) exten => s,2,Answer() exten => s,3,Set(CALLERID(name)=FOOBAR ${CALLERIDNUM}) exten => s,4,Dial(SIP/3155791234,,r) When I place a call to 3155791234 I see the following from Asterisk: -- Executing Answer("SIP/69.67.248.00-b7b1eb08", "") in new stack --...

...etting up a custom context (see below), but the dial plan is only entered AFTER the originating call is answered, so the SIP header is added to the terminating call leg, not the originating call leg. [click-to-call-custom] exten => _X.,1,NoOp("Click to Call") exten => _X.,2,SetVar(_ALERT_INFO=info=alert-autoanswer) exten => _X.,3,Goto(from-internal,${EXTEN},1) ______________________________ Steve Langstaff Citel. The VoIP Migration Company.(tm)

Since 1.4 ALERT_INFO variable has been deprecated. I used to send this via AMI: Action: Originate Channel: Sip/1234 Application: AgentLogin Data: 1234 Variable: _ALERT_INFO=info=alert-autoanswer Callerid: AutoLogin[1234] In order to send an autologin and autoanswer call to the agent 1234 on an Aastra phone at extension 1234. (just for example). Now in * 1.4 with ALERT_INFO deprecated I don't have that option, rather than calling a Local/ channel to SetSIPheaders...