search for: 900m

To replace failing Windows Server, I configured the Linux one. The two services I need are DNS and WINS, so I installed Bind9 and Samba. But I see that Samba is far from compact, its installation requires Perl + Python. I do not need to share resources with shis server too. In result, I got 900M on HDD. Are there a way to install NMBD only? Without (or with as least as possible) extra packets.

...his is a kernel issue. > > You seem to be out of ZONE_DMA memory. I don't know whether > you should be reporting this to RH or Veritas or IBM but > when you do be sure to send them /proc/slabinfo from the > moment of error. > > One thing you might try is booting with mem=900M Running > with more than 900M < n < 1G memory on 2.4 kernels is > problematic. > > I am experiencing this same problem with rsync 2.5.6 and 2.5.7. The difference for me is I am running Solaris 8, not Linux. I am using the same procedure to rsync ten different servers to a...

...es R won't even create one of them.) More to the point, is there some simple remedy? (Rewriting all my code to use the "Matrix" library, for example, is not a simple remedy.) I tried launching R in a terminal with R --min-vsize=10M --max-vsize=5G --min-nsize=500k --max-nsize=900M and that didn't work either. Finally, let me remark that I had the same problem with an older version of R. -- Steve Ellis

...y unable to get xfs_quotas to report correctly on a freshly installed, fully patched CentOS 6 box. I have specified all the same options as on another machine which *is* reporting quota LABEL=TEST /exports/TEST xfs inode64,nobarrier,delaylog,usrquota,grpquota 0 0 xfs_quota -xc 'limit -u bsoft=900m bhard=1g user' /exports/TEST however xfs_quota -xc 'report -hu' /exports/ reports back nothing pertaining to the user but if a do a quota user I get information back Disk quotas for user user (uid 67876): Filesystem blocks quota limit grace files quota limit gr...

I have seen this error in many postings, but the solutions seem not to apply in this case. This error happens during a small file transfer (gif image) and after 75% of a 165G rsync job (the building file list portion is complete.) Most solutions I saw were related to not having enough RAM or running out of disk space. Check out the machine specs below the error. rsync: writefd_unbuffered

Hi all, I'm working to apply a function that will generate a matrix of results only when a specific criteria is met. I want my final results to be a matrix with both the values that meet the criteria (the results of the function), and those that to do in the same positions in the matrix (the original numbers). Here's a sample of what I would like to do: t.mean.1.c <- c(-15, -20,

...; gc()          used (Mb) gc trigger (Mb) max used (Mb) Ncells 170934  4.6     350000  9.4   350000  9.4 Vcells 195920  1.5     786432  6.0   781384  6.0 INCREASING THE R MEMORY FOLLOWING THE INSTRUCTION IN  ?Memory I started R with: R --min-vsize=10M --max-vsize=4G --min-nsize=500k --max-nsize=900M > gc()          used (Mb) gc trigger (Mb) limit (Mb) max used (Mb) Ncells 130433  3.5     500000 13.4      25200   500000 13.4 Vcells  81138  0.7    1310720 10.0         NA   499143  3.9 It increased but not so much!  Please, please let me know.  I have read all r-help about this matter, but...

...t; gc()          used (Mb) gc trigger (Mb) max used (Mb) Ncells 170934  4.6     350000  9.4   350000  9.4 Vcells 195920  1.5     786432  6.0   781384  6.0 INCREASING THE R MEMORY FOLLOWING THE INSTRUCTION IN  ?Memory I started R with: R --min-vsize=10M --max-vsize=4G --min-nsize=500k --max-nsize=900M > gc()          used (Mb) gc trigger (Mb) limit (Mb) max used (Mb) Ncells 130433  3.5     500000 13.4      25200   500000 13.4 Vcells  81138  0.7    1310720 10.0         NA   499143  3.9 It increased but not so much! Please, please let me know.  I have read all r-help about this matter, but n...

...t; gc()          used (Mb) gc trigger (Mb) max used (Mb) Ncells 170934  4.6     350000  9.4   350000  9.4 Vcells 195920  1.5     786432  6.0   781384  6.0 INCREASING THE R MEMORY FOLLOWING THE INSTRUCTION IN  ?Memory I started R with: R --min-vsize=10M --max-vsize=4G --min-nsize=500k --max-nsize=900M > gc()          used (Mb) gc trigger (Mb) limit (Mb) max used (Mb) Ncells 130433  3.5     500000 13.4      25200   500000 13.4 Vcells  81138  0.7    1310720 10.0         NA   499143  3.9 It increased but not so much! Please, please let me know.  I have read all r-help about this matter, but n...

The server has a 1G symmetrical fibre line. It has been speedtested to various local servers to be close to 800-900M. When there is only a single client, there isn't much problem and as soon as the connection is made, the ping time through to tunnel is a respectable 30ms. As soon as a few more clients are connected, ping time degrades to hundreds and sometimes seconds and with dropped packets. Dataflow would...

Hi, I have a 900,000,000*9,000 matrix where I need to calculate the correlation between all entries along the smaller dimension, thus creating a 9k*9k correlation matrix. This matrix is too big to be uploaded in R, and is saved as a binary file. To access the data in the file I use mmap and some api-functions (to get all values in one row, one column, or one particular value). I'm looking for

Hi all, I find that SPEC cpu2k benchmark will always fail (9 of 10 times) for ia32 smp hvm guest with 4 vcpus. I used 4 users parameter to run cpu2k and assign 1G memory for the guest, but it will always fail when running 164.zip case and report warnings as the attachments. However, cpu2k could be run successfully in native linux and xenU guest with the same configuration. Anyone has ideas about

...        used (Mb) gc trigger (Mb) max used (Mb) Ncells 170934  4.6     350000  9.4   350000  9.4 Vcells 195920  1.5     786432  6.0   781384  6.0 INCREASING THE R MEMORY FOLLOWING THE INSTRUCTION IN  ?Memory I started R with: R --min-vsize=10M --max-vsize=4G --min-nsize=500k --max-nsize=900M > gc()          used (Mb) gc trigger (Mb) limit (Mb) max used (Mb) Ncells 130433  3.5     500000 13.4      25200   500000 13.4 Vcells  81138  0.7    1310720 10.0         NA   499143  3.9 It increased but not so much! Please, please let me know.  I have read all r-help about this matte...

...t bootup pae SMP VMX domain. guest crashed with attached output. 5. Create 32 guest with balloon driver will hang xen0: If I do not set a fixed size memory using "dom0_mem=" option in grub.conf for dom0, dom0 will hang after a vmx guest is created. 6. 32 SMP Guest only see about 900M memory when assign 1.5G memory for the guest: If I assign 1.5G memory in vmx config file and boot up the guest, I still can only see 903256KB memory using "cat /proc/meminfo" in the guest, though I can see 1.5G memory allocated to the guest. IA32E HV/xen0 7. CPU2K on 64bit guest...

Hello, I'm having a challenge with increasing vmalloc memory beyond 512M using pxelinux.0 to boot. This config works fine: --- # Configuration file # linux-2.6.20-1.2962.fc6 DEFAULT linux LABEL linux kernel kernels/vmlinuz-2.6.20-1.2962.fc6 append initrd=initrds/bladeinitrd-2.6.20-1.2962.fc6.img enforcing=0 vmalloc=512M --- If I increase vmalloc to 513M, I get errors

Ok, what about placing a dummy file of 5GB or so on the partition, that you can remove when necessary? -----Original Message----- Subject: Re: dovecot disk space settings >> I don't want to restrict each mailbox size. It's just to prevent > running out space completely. > > Why? (If I may ask) > > To provide mailboxes with unlimited space. And to make it

I''ve been trying to find information, suggestions, etc. for how to combine scaling Puppet with the use of management tools like Dashboard/Foreman and MCollective. Our current thinking for an initial deployment is two VMs as Puppet Master worker nodes fronted by a pair of NetScalers. However, I''m not sure how to go about implementing Dashboard or Foreman and MCollective servers in

Hi, I have a Maildir store (about 500 GB) on a linux (redhat 8) server which I am trying to mirror to another identical server. I have 4 GB of ram on both machines. I am using rsync 2.5.5. At present the machines are on the same lan (100Mbit). Everytime I run the rsync, it runs for a short amount of time, (anywhere from 5-20 minutes) and then one of the machines (either the source or the

We run tinc in a linux environment in which it sits there waiting for connections from the clients. All clients are configured to only have one ConnectTo which points to this server. We're seeing in the server log that as soon as a client's connection is activated, a whole bunch of "Flushing x bytes to that host would block" is logged and the whole vpn is bogged down and has

Hi everyone since I''m currently migrating from xm to xl and now are also a victim of the said error, I started researching on it and found that many people had the issue but not many found solution and behind this BSOD (=Bluescreen of Death), there are actually multiple errors in hiding. What I would like to do is gather as much info as possible in this thread to form a kind of