search for: 8139c

I have a CentOS 5.8 box that is dropping packets (just from ping). The network is 8139 RTL-8139/8139C/8139C+ Rev 10 Adding the parameters "pci=noacpi acpi=off " has helped but it still happens. Is there something else that helps the network not drop packets? Thanks, jerry

...nte here that i want to run asterisk: - National Semicondudor Geode GX1 266MHz Geode 266MHz single chip - NS Cx5530a Southbridge National Semiconductors SC2200 - NS PC97317 in chipset - 32MB Compact Flash - 64MB Ram - 10/100Mbps, Autosense 10/100Mbps, Autosense Realtek 8139C National DP83815 / DP83816 Some tip? I have a ide>flash adaptor to make the install... I need recomendations in Linux distro... asterisk min. install ...etc..any info i can get. Thanks for any help Miklos Atenciosamente Cl?udio Miklos iPFONE Telefonia IP Rua Caio Graco 735 S?o Paul...

...d the kernel to the previous version and the network card works fine again. I've tried removing and re-installing the new kernel, but the network card won't work with it. The details of the card are as follows: lspci:- 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) /etc/modprobe.conf:- alias eth0 8139too Any suggestions welcomed.. Thanks Clive

...dge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) 0000:02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Athlon(tm) 64 Processor 32...

...I attempt to enable jumbo frames, I receive: SIOCSIFMTU: Invalid argument, I receive the same error from ifconfig eth1 mtu 9000 and making the change in the ifcfg-eth1 config file. This is the driver I have running from lspci -vv 00:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20) Subsystem: XenSource, Inc. Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Lin...

...Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:08.0 Serial controller: Integrated Technology Express, Inc. IT8874F PCI Dual Serial Port Controller (rev 01) 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 IDE...

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

...HCI USB 1.1 Controller (rev 1a) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) 0000:00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a)...

...n 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) 01:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) # cat /proc/interrupts CPU0 0: 4262013 XT-PIC timer 1: 8 XT-PIC i8042 2: 0 XT-PIC cascade 3: 4217220 XT-PIC qozap 5: 11979 XT-PIC eth0 8: 1 XT-PIC r...

...Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) 00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 00:0f.1 Communication controller: C-Media Electronics Inc CM8738 (rev 20) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) The CD is primary slave (and there is no way to put it as a...

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

...128 (1.1 Kb) Interrupt:17 Base address:0x4000 Further information regarding the network cards: eth0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) eth1: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth2: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth0 and eth2 are used for the bridging. Any help would be appreciated. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xen...

Hello list, I have network problems on dom0 I discovered this trying to copy user''s homes from another box onto dom0. I have tried this via mouting tcp nfs and also via ftp. Both methods give me the same problem. When I try to send lots of continuos traffic the tcp connection bottoms out. I get this on dom0 peth0 transmit timed out, tx_status 00 status e000 diagnostic: net 04cc media

...urious interrupts ERR: 0 MIS: 0 [root at oh1mrr /]# lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0c.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: V...

...13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge 00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge 01:00.0 VGA compatible controller: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] (rev 01) 04:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Might be a pointer to other motherboards with VIA SATA. -- Dominic Mason <dominic@opusvl.com> Opus VL _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...TYPE=Bridge DEVICE=br0 #BOOTPROTO=static BROADCAST=192.168.63.255 #HWADDR=00:1A:64:12:10:D9 IPADDR=192.168.62.199 NETMASK=255.255.254.0 NETWORK=192.168.62.0 ONBOOT=yes KVM image is as follows [root at www ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=none BROADCAST=192.168.63.255 HWADDR=54:52:00:04:00:1d IPADDR=192.168.62.14 NETMASK=255.255.254.0 NETWORK=192.168.62.0 ONBOOT=yes GATEWAY=192.168.62.40 TYPE=Ethernet i can access the kvm image from other hosts on the network , but the kvm image can not access anything...

...ro Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet (rev 03) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Maste...

...mmon 3.0.3-0-2 XEN administrative tools - common files lspci | grep -i eth 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) [1] 02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) [2] 02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) [3] [1] This is the adapter attached to the local network, shown in Dom0 as eth3 [2] This adapter handles a broadband connection [3] This one is hidden from Dom0 (reserved for DomU) cat...

When I have installed centOS, Kudzu says my network cards have been removed, and right after it finds them again and asks me to configure them? It looks like it is the same thing it finds that it just said was removed. There are 3 Relatek|RTL-8139/8139C/8139C+ cards in there and it is all of them it will remove and reconfigure. It doesn't matter if I select ignore or reconfigure them, they still work after the reboot. It is just a little strange and seems a little buggy ;) brgds Ulrik

Bernard Łabno wrote: > Hello, > What does this line mean : > > HTB: quantum of class 10200 is small. Consider r2q change. > > > And how should I fix it ? I have dsl 1mb connection and 2 cards > (realtek-8139C and realtek-8100B/8139D) > > Could the above line cause this ? : > NETDEV WATCHDOG: eth0: transmit timed out > eth0: Transmit timeout, status 0c 0005 c07f media 00. > eth0: Tx queue start entry 3518 dirty entry 3514. > eth0: Tx descriptor 0 is 0008a041. > eth0: Tx descriptor...