search for: 8110sc

...n 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) More detailed: 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 I/O ports...

...er with the 6.4 CR packages, and I've experienced 3 or 4 hard lockups since. The server is a fanless VIA C7 "CentaurHauls" system with a 1GHz CPU underclocked to 800MHz and 1GB of RAM. It has a dual-port Intel 82546GB NIC in its single PCI slot. (It also has an on-board Realtek RTL-8110SC/8169SC NIC that is plugged in, but doesn't currently have an IP address configured.) This server provides a number of services -- DNS, DHCP, routing between VLANs, DLNA media server, CUPS, etc. Most importantly, it runs Asterisk and manages all of the phones in the house. There's absolut...

Hi all, Our intranet's WAN interface just stopped working yesterday, and I can't figure it out. The machine has a Gigabyte motherboard, with on-board RTL-8110SC/8169SC Gigabit Ethernet and D-Link PCI NIC for the LAN side. I can get into the LAN side without an issue, but can't see the WAN side at all. [root at intranet ~]# ifconfig eth0 up eth0: unknown interface: No such device lspci -v 01:01.0 Ethernet controller: D-Link System Inc DGE-528T Gig...

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

Remote box SNV93 (xVM kernel) 192.168.1.54 (NIC RTL8169) Attempts of ssh connection from CentOS 5.1 DomU 192.168.1.37 at SNV93 Dom0 (NIC RTL8110SC) # ssh user1@192.168.1.54 hangs .. TCPDUMP running on remote box (192.168.1.54) # tcdump -s 1600 -vv One entry generates for each ssh connection attempt. First:- 17:12:43.058821 IP (tos 0x0, ttl 64, id 19771, offset 0, flags [DF], proto TCP (6), length 72) 192.168.1.37.52189 > 192.168.1.54.ss...

...reach any other computer or router on the LAN (whereas other boxes work fine). Where the network cable is plugged, an orange light stays on and does not blink. Booting with 2.6.18-194.17.1.el5 instead solves the issue. The network card is: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) I just wanted to share this, and see if anybody else experienced such issues. It makes me feel uncomfortable with updating some remote servers, because it would really be a pain to fix if their network cards stopped working after rebooting (they are not the same as...

Hi all, Having a 4 NIC server, I want to bridge eth2 and eth3, with a bridge named br0. Searching the web I only found about creating a file /etc/sysconfig/network-scripts/ifcfg-br0, but did not find where to explicitely list what ports will be bridged. Where is it configured? Thank you. -- RMA.

...orporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 7100 GS (rev a1) 03:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) I think this is an irq stuff, because in /proc/interrupts is no device eth0: cat /proc/interrupts CPU0 CPU1 1: 8 0 Phys-irq i8042 6: 2 0 Phys-irq floppy 8: 0 0...

...green May 20 12:17:09 wolfpac flash_the_led.pl: Both ping sites failed flash red-green May 20 12:17:21 wolfpac flash_the_led.pl: Both ping sites failed flash red-green May 20 12:17:33 wolfpac kernel: r8169 0000:05:00.0: eth0: link up 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. Device 0123 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- &l...

Now that x86-64 has directly accessible percpu variables, it can also implement the direct versions of these operations, which operate on a vcpu_info structure directly embedded in the percpu area. In fact, the 64-bit versions are more or less identical, and so can be shared. The only two differences are: 1. xen_restore_fl_direct takes its argument in eax on 32-bit, and rdi on 64-bit.

...64, IRQ 18 Memory at f7fff000 (32-bit, non-prefetchable) [size=2K] I/O ports at ec00 [size=128] Capabilities: [50] Power Management version 2 Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 0b:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: ASUSTeK Computer Inc. Device 820d Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 I/O ports at e800 [size=256] Memory at f7ffe000 (32-bit, non-prefetchable) [size=256] Expansion ROM at f7fc0000 [disabled] [size=128K]...

Dear All, I have created a virtual high performance computing (HPC) cluster of 6 compute nodes with MPICH2 using Xen-based Fedora 11 Linux 64-bit paravirtualized (PV) domU guests. Dom0 is Fedora 11 Linux 64-bit. My Intel Desktop Board DQ45CB has a single onboard Gigabit LAN network adapter. I am able to bring up the ring of mpd on the set of 6 compute nodes. However, I am consistently

Dear All, I have created a virtual high performance computing (HPC) cluster of 6 compute nodes with MPICH2 using Xen-based Fedora 11 Linux 64-bit paravirtualized (PV) domU guests. Dom0 is Fedora 11 Linux 64-bit. My Intel Desktop Board DQ45CB has a single onboard Gigabit LAN network adapter. I am able to bring up the ring of mpd on the set of 6 compute nodes. However, I am consistently