search for: 80x25

Greetings! I have installed xen-4.0 with kernel 2.6.32 on a gentoo box. Everything works perfectly, except one tiny detail. I do not have X installed on the machine, so I configured the (old, non-xen) kernel to use a framebuffer, so that I don''t have to cope with the ugly 80x25 resolution, especially on a 19" display. Unfortunately, with the xen kernel, dom0 now uses the 80x25 mode and I can''t seem to get it to use the framebuffer like it did in the non-xen kernel. I''m usually logging on locally for maintenance from time to time, and 80x25 is *real...

...4.1.0 & linux 2.6.39 but get the same result. The motherboard is a Gigabit GA-MA69VM-S2. The lspci -vvv output is attached. What I did notice is the way the screen resolution changes during boot is different for the two main machines that I test on. On the machine that works, instead of the 80x25 console that I''m used to with xen 3.4.1, I get a much higher resolution output with two penguins at the top with 4.1.0. When I boot the system without the xen hypervisor linux starts at the 80x25 resolution but then quickly puts the screen into high resolution. On the machine that fails, w...

...which uses your menu, I found I can't reach more than 24 rows whereas my screen is 25. set_windows_size() relies on getnumrows() to define the maximum number of possible rows. But regarding to getnumrows() code, it sounds to report "// Actually numrows - 1". On my screen which is 80x25, getnumcols x getrowcols reports 80x24. The set_windows_size() is so refusing to set the screen up to 80x25. Is it a desired behavior or can we fix the menuing system by replacing getnumrows() calls by getnumrows()+1 ? Erwan,

...ing it as a server for a database. I doubt that I will use anything but run level 3, but am looking at the gui tonight. I am having difficult using konsole with the same scripts that I have used on FC4, FC5, and FC6 with success. I am executing this command from a Desktop link konsole --vt_sz 80x25 --profile smile with smile being a profile stored in the user's .kde subdirectory The above command had to be modified to include the path to pick up the profile called 'smile' konsole --vt_sz 80x25 --profile /home/admin/.kde/share/apps/konsole/profiles/smile However, although incl...

Hi, Working some more with the HDT command line interface, I noticed that the help (on a 25 line console) wraps around the screen. So the start of the help is missing. I was wondering if the help could not be better formatted for 80x25 in a future release (maybe listing options comma-seperated instead of newline seperated). -- -- dag wieers, dag at wieers.com, http://dag.wieers.com/ -- [Any errors in spelling, tact or fact are transmission errors]

...expert so please correct me if I'm saying anything wrong. I noticed a difference when using grub2 or syslinux in my linux virtual console (tty[1-5]) which uses VGA text mode (no graphical mode). To be sure that I'm using this mode, I did: $ dmesg | grep -i vga Console: colour VGA+ 80x25 In my understanding when using the VGA text mode, 16 colours are available. However, if I try to display those 16 colours after syslinux booting my system, I can see only 8 different colours. Here's my syslinux.cfg: DEFAULT linux PROMPT 0 UI menu.c32 MENU TITLE Linux LAB...

I am getting a series of IOAPIC errors in xl dmesg on a Dell OptiPlex GX100 machine (bought in 2000). I also get an error from traps.c which is very similar to the one in the ''Getting mm.c errors from xl dmesg on certain hardware'' thread. This happens during system startup with no DomUs running. I have attached the xl dmesg log. _______________________________________________

Hello, I have several CentOS 6 VMs, I have updated the first one successfully, but there is one thing I miss or I don't like; How do I get the standard console with 80x25 back? Hello, this is /boot/grub/grub.conf default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-642.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-642.el6.x86_64 ro root=UUID=a27dc9a0-ea3a-497d-a9c3-80c7bbba31fa rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT...

Noted that xterm by default uses 24 lines per window. I have reviewed /etc/termcap looking for a specific entry for xterm that I can edit to change the ln#24 to ln#25 for our application. When I used RedHat there was an editable option to change the number of displayable lines as is done in putty. Any suggestions? --Hal. -- Hal Davison Observe Goal, Set the course, Burn the map

...sus GTX 970 and re-booted. >> >> I run with the "rhgb quiet" option removed from grub2, so I can see >> all that happens up to the graphical login screen and I noticed that >> the re-boot was different at the point at which the screen changed >> from a basic (80x25 ?) text to a higher resolution (128X50 ?). This no >> longer happened and I got a simple blank screen. >> >> If I wait, the graphical boot screen eventually appears and I can >> login to KDE successfully and run my desktop apps as normal. If I >> switch consoles (e.g....

...al terminal (but not written to harddisk): | [date and hostname] ata1: command 0x35 timeout, stat 0x50 hos_stat 0x24 (Additional files are available at <URL:http://mjh.name/files/tmp/xen-1/>) Second test was with unstable, which always locked up after the message "Console: colour VGA+ 80x25". (Compiling with GCC 3.3.4 instead of 3.4.3 makes no difference.) - Now I''m curious: Were there any changes made to Xen which might have caused things to change? Might the 2.6.9 -> 2.6.10 update have done the trick? Is my h/w update or the BIOS update likely to be the c...

Hi, I'm toying with the SMP/i386 ACPI suspend/resume patches in -9. Thanks so much for this! I've noticed though that the video backlight stays off after resume. A common problem on -9, so I set hw.acpi.reset_video=1. That restores the backlight. However, the video mode isn't restored. I have my console set to VGA_80x60 and the resume seems to set it up "wrong". I get half

...ard support (so are zero issues with future ethernet card compatibility, this rules out using a full operating systems like linux/dos/win32 unless of course those OSes can be booted and retain the generic BIOS ethernet driver interface for their eth0 ?). * The dialog would be simple, based on 80x25 like text mode, looking much like Red Hat linux installs in text mode, or "make menuconfig" on Linux. * Simple widgets: menu / nagivation, command buttons, editable controls for: textbox, paragraphbox, radio, drop down, checkbox, ipaddress. * The engine would load and execute as the...

...How should I proceed further to find where the miscompilation is? Can bugpoint help me here? (it takes ~10 seconds to compile and boot a failing kernel with kvm/qemu) This is 2.6.28-rc6-tip, and LLVM SVN r59914. [ 0.000000] Detected 2832.689 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 [ 0.004000] IP: [<ffffffff802b3680>] kmem_cache_alloc+0x30/0xa0 [ 0.004000] PGD 0 [ 0.004000] Thread overran stack, or stack corrupted [ 0.004000] Oops: 0000 [#1] PREEMPT SMP [ 0.004000] la...

Hi, I understand Windows UI applications can run in Linux using wine. 1. Can I run console/command line applications also? 2. If yes, a how can a shell script running on Linux invoke the console/command line application. (A sample would be great) Thanks, Susheel -------------- next part -------------- An HTML attachment was scrubbed... URL:

...OS-provided physical RAM map: Xen: 0000000000000000 - 0000000020800000 (usable) No mptable found. Built 1 zonelists. Total pages: 133120 Kernel command line: Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2591.858 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Software IO TLB disabled Memory: 507648k/532480k available (2321k kernel code, 16012k reserved, 1312k data, 168k init) Calibrating delay using timer specific routine.. 6...

...lized vgem 1.0.0 20120112 for vgem on minor 0 > [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1 > usbcore: registered new interface driver udl > [drm] pci: virtio-vga detected at 0000:00:01.0 > fb0: switching to virtiodrmfb from VGA16 VGA > Console: switching to colour VGA+ 80x25 > virtio-pci 0000:00:01.0: vgaarb: deactivate vga console > Console: switching to colour dummy device 80x25 > [drm] features: -virgl +edid > [drm] number of scanouts: 1 > [drm] number of cap sets: 0 > [drm] Initialized virtio_gpu 0.1.0 0 for virtio0 on minor 2 > general protect...

...2-14)) Fri May 21 11:56:27 JST 2010 (XEN) Latest ChangeSet: Wed May 19 22:59:52 2010 +0100 21438:840f269d95fb (XEN) Console output is synchronous. (XEN) Command line: loglvl=all guest_loglvl=all sync_console console_to_ring com1=9600,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 000000000009ec00 - 00000000000a0000 (reserved) (XEN...

...table found. PERCPU: Allocating 26496 bytes of per cpu data Built 1 zonelists. Total pages: 106528 Kernel command line: root=/dev/sda1 ro ip=:1.2.3.4::::eth0: Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Xen reported: 2657.322 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Software IO TLB disabled Memory: 416380k/446464k available (2265k kernel code, 21224k reserved, 1351k data, 200k init) Calibrating delay using timer specific routine.. 5318...

...al RAM map: Xen: 0000000000000000 - 0000000010800000 (usable) No mptable found. Built 1 zonelists. Total pages: 67584 Kernel command line: root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Xen reported: 2393.994 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Software IO TLB disabled Memory: 244960k/270336k available (2358k kernel code, 16872k reserved, 1325k data, 172k init) Calibrating delay using timer specific routine.. 5987...