search for: 60sec

...ially interested > in feedback about how it behaves when decoding files that were encoded > with a floating point version or vice versa. Encoding on an XScale-PXA255 @ 400MHz: First I tried narrowband, at 24kbps, with verbose output: # time speexenc -n --bitrate 24000 --comp 1 -V test-8kHz-60sec.wav test-8kHz-60sec.spx Encoding 8000 Hz audio using narrowband mode (mono) Bitrate is use: 18200 bps real 1m8.042s user 0m48.240s sys 0m11.220s I guessed the verbose output was slowing it down, so: # time speexenc -n --bitrate 24000 --comp 1 test-8kHz-60sec.wav test-8kHz-60sec.spx En...

Hi, I just released unstable version 1.1.2 that contains more fixed-point work. Though it's still not 100% complete, enough have been done to make it run in real-time on ARM. In order to do that, compile with --enable-fixed-point --enable-arm-asm. All narrowband modes work in real-time with complexity 1 (some work with higher complexity) and some wideband modes also work (up to ~20 kbps) at

....41 This is the information the driver is able to pull UPS status OL UPS model TRIPP LITE UPS Manufacturer Tripp Lite Vendor ID 09ae Product ID 3016 OS is FreeBSD/XigmaNAS v11.2 The issue is that for every 30sec that the driver is able to pull the information it will lose connection for about 60sec; maybe it is unable to poll information.  What parameters I can use to stop the disconnect?  Or a proper way to diagnose what the real issue is?  I already tried the physical connection.  Replaced USB cord with a known cable that works with another UPS and changing USB ports. -------------- next...

...Could not resolve host: > mirrors.fedoraproject.org" > > Everything else works for me. > > Regards > Tim This works fine for me, and the DNS for mirrors.fedoraproject.org looks fine too -- points to the cname wildcard.fedoraproject.org., which resolves to 8 A-records, with 60sec TTLs (for my US/east coast location). Did you check to see what your DNS is showing? - Richard

Dear I am using Ser+Asterisk, for sip providing. there is a problem, the asterisk does not return back the busy tones to the sip phones. for example, if the destination number is busy, we are hearing waiting ring from sip phones, and after 60sec(timeout) the call will be terminated. thanks in advance for all help Best Mani __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hi Experts, _write value ------------- Distribution ------------- count 4096 | 0 8192 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1161825 16384 | 2754 32768 |@

...call in queue has been answered or if caller just hangup? Second, how to deal with timeout, I have strange behaviors. If I put timeout=60 in queue.conf and I call the queue passing also 60 as timeout value, asterisk is returning after 5000ms the 4000 then 2000 then 2000 aso. I can replace the 60sec value on both place, or 60 in queue conf and 10 when calling queue, I never have a stable behavior and more, not what I want. Exemple: let say asterisk should try all 20 seconds to call the member for 8 seconds: how to configure this? What I found, is to put timeout=0 in queue conf and passing...

...until the discrepancy is 1988MB option alu.open-files-usage.entry-threshold 1024 # Kick in if the discrepancy in open files is 1024 option alu.open-files-usage.exit-threshold 32 # Don't stop until 992 files have been written the least-used volume option alu.stat-refresh.interval 60sec # Refresh the statistics used for decision-making every 60 seconds end-volume volume unify2 type cluster/distribute subvolumes remote2a remote2b option scheduler alu # use the ALU scheduler option alu.limits.min-free-disk 5% # Don't create files one a volume with...

...MP3 at 24 kbps anyway :) > > Last thing, can you try the code that's in CVS right now? I removed many > float ops since 1.1.1, so it may already work better. Current CVS, on a 16kHz, 16 bit, mono, 60 second sample: # time speexenc -w --quality 0 --abr 28800 --comp 0 -V test-16kHz-60sec.wav test-16kHz-60sec.spx Encoding 16000 Hz audio using wideband (sub-band CELP) mode (mono) Bitrate is use: 35800 bps (average 28564 bps) real 3m39.017s user 1m29.130s sys 2m0.910s I got the usage of --abr wrong before, (28 = 28 bits per second :) I'm also assuming quality=0/comp=0...

...t cuts the power about 2sec after receiving the shutdown >> command. > > What values have you tried? I wonder if it is rounding down to 0 > seconds. Great idea! I did some testing and it appears anything lower than 60 for offdelay simply gets ignored. In fact, setting offdelay to 60sec also fixes the second issue. Even with no device plugged into the UPS, it stays off while still on battery power! > >> Second issue: When the UPS is on battery power and I issue the >> shutdown, it goes off, but after about 15sec it comes back on even >> while still on bat...

...nd the UPS just cuts the power about 2sec after receiving the shutdown command. >> What values have you tried? I wonder if it is rounding down to 0 seconds. > Great idea! I did some testing and it appears anything lower than 60 for offdelay simply gets ignored. In fact, setting offdelay to 60sec also fixes the second issue. Even with no device plugged into the UPS, it stays off while still on battery power! Ah, glad that worked. I will add some notes to the documentation about the offdelay setting. > Yes, USV is the German acronym for UPS, which I accidentally slipped in. That's...

Hi all, I've got a 400MHz XScale-PXA255 board, and I want to stream voice from it over a network connection at 28.8baud. This calls for a capable voice encoder which can encode at about 24kbps. I was damn happy when I found Speex and said goodbye to MP3 :) However, i'm still a long way from realtime encoding using speexenc, is this possible? Using the fixed point math option in

W dniu 22.08.2018 o 14:41, Charles Lepple pisze: > /lib/nut/usbhid-ups -a apc -DDD -k Please see attachement. -- Karol Olszewski ipflow.pl -------------- next part -------------- A non-text attachment was scrubbed... Name: APC_BackUPS_CS_650_fsd.log.gz Type: application/gzip Size: 5735 bytes Desc: not available URL:

There is a posting in the CentOS forum that can potentially make a good article regarding encryption (or supplement the existing page). Please take a look at #4 of: http://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&topic_id=15923&forum=42 The poster says, "I think that the contents of this document would make a good addition to the wiki, but I don't have the

...me/karol# upsc apc at localhost | grep driver.param Init SSL without certificate database driver.parameter.offdelay: 90 driver.parameter.ondelay: 120 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no UPS cut off power after 60sec after FSD command from driver, when power back start after ~2sec. -- Karol Olszewski ipflow.pl -------------- next part -------------- A non-text attachment was scrubbed... Name: APC_log_git.log.gz Type: application/gzip Size: 6317 bytes Desc: not available URL: <http://alioth-lists.debian.net...

Hi, I've come across some possibly buggy behaviour with regards to Dovecot and the use of the IDLE keyword. Found this while testing out inotify support for Johannes - although after asking him and him reproducing it, he is of the opinion that it's not a inotify specific problem. The behaviour is that when the client is idling, Dovecot seems to only alert to the first new message

...'file changed as we read it' error I've posted about to this group some days ago. Enabling consistent metadata didn't resolve the problem. A side effect was that access performance worsened (~1 second for an ls in a directory with 252 files, ~50sec to extract a 16MB tar archive and ~60sec to remove the extracted files again). Another side effect were hundreds of metadata selfheal log messages per minute. Meanwhile I disabled the consistend metadata setting again but the log messages are still present. I could not find an error or warning as to why self healing is running at all. [2...

Hi *, i am coming from UML, and now i evaluate Xen on my desktop: Xen-2.0.4 linux-2.6.10 "CONFIG_MODULES is not set" "CONFIG_AGP is not set" "CONFIG_FB_RADEON=y" FC3, [/usr]/lib/tls moved away It works, but some desktop applications crash once in a while within dom0: metacity-2.8.6 firefox-1.0.1 wnck-applet (from gnome-panel-2.8.1) But

Hello, I hope i wont make it too complicated and sorry for my englihs... The company has multiple connections to the internet ADSL + CABLE + XDSL... and i only want to use two for load balancing for now. I have read the HOWTO and i got it up and working it works great but i still have a few questions if anyone could help! the setup is: ADSL on ETH0 and CABLE on ETH1 When i load balance on

On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: > Hi there, > > I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. > > First issue: whatever I