search for: 60gb

...e treated as an extention of the original disk, under Samba. This would mean that the capacity of the second drive would be pooled with the first drive, on which it is mounted. For example: I have a 200GB hard drive mounted to the directory "/pub". I would like to add an additional 60GB drive to this. Can I create a directory on the 200GB drive called "/pub/temp" and mount the 60GB drive to that mount point? Then be able to have Samba consider the whole mess as a single 260GB drive? I have already tried this (with my limited knowledge) and all that seems to happen...

Hi List I am hoping that someone here could perhaps give me a straight answer on a question that someone asked me today I have always belived that if you have 5 hard drives 1 50gb second 50gb third 20gb fourth 60gb firth 30gb that the largest would then be the size of the smallest disk, not 80 or 100 or 120 for that matter or am I wrong here? Regards? Per Qvindesland? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20090...

...t is essentially a RH 7.3 on a 1.4GHz Athon with 1GB or RAM. I compiled Samba 2.2.5 in /opt/samba-2.2.5 and am using the following smb.conf: [global] workgroup = FLASH1 interfaces = vmnet1 bind interfaces only = yes log file = /var/log/samba/log.%m [homes] guest ok = no read only =no [60GB] comment = Temporary file space path = /60GB read only = no public = yes What I am trying to do is to have Samba bind only to the internal network device so that no one can look @ my samba share from the outside network. vmnet1 is a VMWare vertual network. My clie...

Greetings, We've a fairly large dataset (around 60GB) to be loaded and crunched in real time. The kind of data operations that will be performed on this data are simple read only aggregates after filtering the data.table instance based on the parameters that will passed in real time. We need to have more than one instance of such R process running to...

...t OS and I have compiled R from source with the following config ./configure --prefix=/usr/local/R-2.9.1 --enable-Rshlib --enable-BLAS-shlib --enable-shared --with-readline --with-iconv --with-x --with-tcktk --with-aqua --with-libpng --with-jpeglib and I would like to verify that I can use 55GB-60GB of the 64GB of memory within R. Does anyone know how this is possible? Will R be able to access that amount of memory from a single process? I am not an R user myself but I just wanted to test this before I turned the server over to the researchers.. Thanks! -scz

2.4.18 kernel) using 3 x 60GB WD 7200 IDE drives on a 7500-4 controller I could get peak I/O of 452 MBytes/sec, and a sustainable I/O rate of over 100 MBytes/sec. That is not exactly a 'dunno' performance situation. These tests were done using dbench and RAID5. Let's get that right: 100 MBytes/sec == 800 Mbits/se...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'd like to put a 60GB hard disk into Gateway 2000 Pentium 150 (from '96 or '97 or so I think) running FreeBSD 4.8 RELEASE. Can anybody tell me how successful this is likely to be? Will I be able to use the full capacity of the drive? I seem to recall that the trick with large hard disks and old BIOSes is to...

...raph shows issues with debug info memory use. LLVM goes up to 35GB. LLVM developers are also working on debug info merging improvements (equivalent to what GCC's type merging is) and the situation has improved in last two releases until the current shape. Older LLVM checkouts happily run out of 60GB memory & 60GB swap on my machine.". > > I'd be interested to hear more about the LTO design you folks are working on, whenever you're ready to share the details. We will share the details as soon as we can -- possibly some time in Jan 2015. > I read the GCC design docs...

Hello all. I have a large .txt file whose variables are fixed-columns, ie, variable V1 goes from columns 1 to 7, V2 from 8 to 23 etc. This is a 60GB file with 90 variables and 60 million observations. I'm working with a Pentium 4, 1GB RAM, Windows XP Pro. I tried the following code just to see if I could work with 2 variables but it seems not possible: R : Copyright 2005, The R Foundation for Statistical Computing Version 2.2.1 (2005-12-...

...9;s a RedHat 7.2, 2.4.7-10 custom kernal (I added in the Promise FastTrak support and HIGH mem support to break through the c800MB barrier to use the whole 1GB RAM). Creates the array fine... I get a problem as soon as I attempt to populate it... the box is a Athalon 1.4GHz and 1GB RAM, two other 60GB drives on IDE0 and IDE1 I get an almost total slowdown/shutdown and top shows the load going to 8 or nine with noone logged in and console only.... Behaviour only when accessing the ATARAID. ext3 for / only everything else ext2 Has anyone any idea/seen this behaviour or got an 'out' ?...

Hi all, Well, I'm getting somewhere I think, I now have both ACL support and domain login basically working. However I'm at a bit of a loss as to how to proceed. Basically I want to copy over a large number of files and directories (~300k files, ~60Gb total) from an existing W2k server to a Samba server. These files have existing ACLs set, so I need to preserve them somehow. I can of course copy over the files themselves using any number of methods "from" either machine, but the majority of them don't have any knowledge of ACL...

I have a very small Samba4 system that supports my W7 clients. So small, in fact, that I have only one DC (right now.) My DC is a 32-bit Pentium4 processor (512Mb RAM, 60Gb hdd), small form factor case, I got lucky and found for cheap$$. My member server is a Intel DuoCore PC with RAID 1 (mdadm) hard drives mirrored running on Debian 7.8.0. And my backup machine is a seperate (does only backup) QuadCore, 2Gb RAM, with OS on 60Gb hdd and two 1Tb hdd's that store th...

Hi, I have downloaded around 60GB package repositories of bioconductor to use it locally and to set up mirror at my university site. I have installed the mirror with rsync command and able to access also. Now I have to set a cron job for its daily updating from bioconductor website. How should I do it? I know rsync have to be us...

I created on my 60Gb hdd (data=journal) journal with 16Mb size, i think it not enough. As it is possible to change size of journal ?

...urces. As long as CPU's are fast and networks are slow, rsync with compression does a great job. However, if I run rsync on a slow box (166MHz Ultra SPARC) over a fast network (100Mb/s), the compression kills the transfer rate. I turned compression off and I should be done rsyncing my files (60GB) overnight. I would like to request a feature I call "conditional compression". What this would do would check the network buffer, and if it is mostly full, then rsync knows that the network is slow and it will compress data. If the network buffer is mostly empty, then rsync knows that...

...lso needn''t worry about the race between dio write and punch hole, because we have extent lock to protect our operation. I ran fio to test the performance of this feature. == Hardware == CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz Mem: 2GB SSD: Intel X25-M 120GB (Test Partition: 60GB) == config file == [global] ioengine=psync direct=1 bs=4k size=32G runtime=60 directory=/mnt/btrfs/ filename=testfile group_reporting thread [file1] numjobs=1 # 2 4 rw=randwrite == result (KBps) == write 1 2 4 lock 24936 24738 24726 nolock 24962 30866 32101 == result (iops) == write 1 2 4 lock...

...king on making a 40gb laptop ide drive bootable via syslinux as the drive is in an external hd enclosure. syslinux installed on a 100 mb bootable fat32 partition and when I tried to boot from the drive, I got a syslinux prompt which was correct as I had not done a config file yet. I later found a 60GB laptop ide drive and put the larger drive in the enclosure and tried to install syslinux on that, using the same 100mb fat32 boot partition. This time no joy. I get an error indicating that no OS can be found. I triple checked and followed the exact same procedure in both cases, so I'm lost...

...quota recalc. However for users with big maildirs, receiving email every couple of seconds, there are tens of delivery processes each doing its own recalc (as they open file for APPEND and there's no locking). What's even worse, after all the stats and getdents (it takes a lot of IO for 60GB account with 2M emails), deliver makes stat on 'new' dir and detects changes after which it unlinks freshly created maildirsize. So possibly this will never be finished as every process drops its own work. The same thing happened when we checked the native dovecot LMTP server (every co...

.../128M/48GB/14..1"TFT/8XDVD/56K+10/100M/W2000 T23- 5FC(9000Ôª) PIII1.2GB/128M/48GB/14.1"TFT/8XDVD/56K/W2000/ÎÞÏßÍø¿¨ T23- 6UC(9200Ôª) PIII1GB/128M/20GB/14.1"TFT/8XDVD/56K+10/100M/XP T23- 4MC(9100Ôª) PIII1.13GB/128M/30GB/14.1"TFT/8XDVD/56K+10/100M T23- 9TC(9200Ôª) PIII1.2GB/256M/60GB/14.1"TFT/8XDVD/56K/ÎÞÏßÍø¿¨/XP X22- QJC(8300Ôª) PIII800/128M/20GB/12.1"TFT/DVD+µ××ù/56K+10/100M/ÎÞÏßÍø¿¨ X22- QHC(7600Ôª) PIII800/128M/20GB/12.1"TFT/DVD+µ××ù/56K+10/100M C. »ÝÆÕHP 6100-F3260W(9000Ôª) PIII1G/256M/20GB/14.1¡°TFT/DVD/56K+10/100M/³¬±¡/³¬Çá/¹âÈí»¥»» 6100-F3266W(7000Ôª) P...

...t370,VIA694/596B/CMI8738Éù¿¨/ATA66)--210 VP-133 (Socket370,VIA693A/596B/CMI8738Éù¿¨/ATA66)---220 SIS730S (SocketA,SiS300/AC97/10/100MÍø¿¨)-----235 SIS630E (Socket370,SIS630E/SiS300ÏÔ¿¨/AC97)----255 B:Ó²ÅÌ Maxtor 40GB£¨ Plus 60/É¢£©7200ת\»º´æ:2MB --260 40.9GB£¨ VL40/É¢£©5400ת\»º´æ:2MB--230 160GB£¨ D540X/É¢£©5400ת\»º´æ:2MB--800 120GB£¨D540X/É¢£©5400ת\»º´æ:2MB--500 20GB£¨ Plus 60/É¢£© 7200ת\»º´æ:2MB--210 30GB£¨ Plus 60/É¢£©7200ת\»º´æ:2MB--250 81.9GB£¨ 80/É¢£©5400ת\»º´æ:2MB--380 20GB£¨ Plus D740X/É¢£©7200ת\»º´æ:2MB--250 40GB£¨ Plus D740X/É¢£©7200ת\»º´æ:2MB---260 20GB£¨...