search for: 10gb

...sks - 2x100GB OCZ DENEVA 2R SYNC eMLC SATA (no expander so I hope no SAS/ SATA problems). Specs: http://www.oczenterprise.com/ssd-products/deneva-2-r-sata-6g-2.5-emlc.html I want to use the 2 OCZ SSDs as mirrored intent log devices, but as the intent log needs quite a small amount of the disks (10GB?), I was wondering if I can use the rest of the disks as L2ARC? I have a few questions about this: -Is 10GB enough for a log device? -Can I partition the disks (10GB + 90 GB) and use the unused (90GB) space as L2ARC? -If I use the rest of the disks as L2ARC, do I have to mirror the L2ARC or...

...interaction with the progress meter code is a bit buggy. In one test, it > reported an inordinately high initial rate. In another test, it reported > a negative rate. > > A simple test is to reget a file which was already transferred > successfully: > > sftp> reget testfile.10gb > Resuming /nobackupp1/imorgan/testfile.10gb to testfile.10gb > /nobackupp1/imorgan/testfile.10gb 100% 10GB > -2097151.-9KB/s 00: > sftp> > > -- > Iain Morgan > > > I didn't encounter such problems during my testing. I'll try again @ work w...

...G) smbclient to test the transfer speed > and get (10G<->10G) 199MB (mtu 1500). > > 33692     pkoch         users         10.0.3.100 > (ipv4:10.0.3.100:54821) NT1 > > Using smbclient (using NT1) we see the following values: > > Cl             Server (using get) > 10GB <-> 10GB      199MB/s > 10GB <-> 2x1GB    162MB/s  (??? ) >   1GB <-> 2x1GB     60MB/s > > > Cl             Server (using put) > 10GB <-> 2x1GB    ~100MB/s >   1GB <-> 2x1GB        50MB/s Try using SMB3 (smbclient -mSMB3). See if that makes a di...

Hello, I have a question about multichannel and the load-balancing algorithm. What kind of algorithm is it? (Roud-robin, dynamic round-robin, ...) What are the arguments the algorithm compute to load-balance the network traffic on the interfaces? I already know that if a 10Gb/s interface and a 1Gb/s interfaces are in the multichannel connection the 1Gb/s one will be ignored until the 10Gb/s goes down. But the available bandwith (and not the theorical bandwith) could vary. This is why I want to know if the load-balancing algorithm doesn't limit to just load-balance e...

...and is a distributed one: === snip === muzzy:~# gluster volume info Volume Name: m3d Type: Distribute Status: Started Number of Bricks: 3 Transport-type: tcp Bricks: Brick1: g0:/g0 Brick2: g1:/g1 Brick3: g2:/g2 Options Reconfigured: features.quota-timeout: 0 features.limit-usage: /1Gg:1GB,/10Gg:10GB,/5Gg:5GB,/512Mb:512MB,/dav/256MB:256MB,/dav/1GB:1GB,/dav/5GB:5GB,/dav/10GB:10GB,/cifs/256Mb:256MB,/dav/128mb:128MB,/dav/192mb:192MB,/cifs/192mb:192MB,/cifs/64mb:64MB features.quota: on auth.allow: 194.12.*,130.204.198.50 === snip === One of nodes, (g0), also mounts m3d volume (mount -t glusterfs)...

Hi All, I''m trying to choose between 10Gb Ethernet cards for Xen. The trouble is I''m getting quite confused with all the different terms different companies use to describe NIC''s virtualization support. Any ideas what the differences are between these brands? I am trying to sort a comparison table but will need some h...

Hi! Did anyone encountered some ssl transaction problems with latest version of ixgbe? i had some very strange problem with nodes with private ip (the server with 10 gb interface was masquerading the nodes behind a switch with 10gb and 1 gb interfaces) i used the latest drivers and the ssl conection could be made .. as soon as i used the 2.6.18-308.8.1.el5 driver (3.4.8-k) the problem vanished... What am i missing? how can a network driver have effect on ssl transactions? Thank you for any info ..i feel like in twilight zon...

Hi Alli need some information about how i can extend the HDD in domU. I am a domU having 10GB of disk assigned to it now which is running out of space. is there a way i can assign a other 10GB space to the system in such a way that it appears as a single HDD of 20GB without loss of data. Thanks _______________________________________________ Xen-users mailing list Xen-users@lists.xensour...

An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20131024/d5fba257/attachment.html>

Hi- just wondering, what would be the best quality rating to use to fit lots of music into 10GB of HD space. The audio quality has to be high enough for it to sound good when played through PA systems (for when my college is stupid enough to forget to hire a DJ, or when the realise the DJ they always hire can't use a mixing desk properly) ranging from a functional PA system thats stuck in...

Hi, i have two servers, connected to to the lan by 10Gb with 10Gb and DAS hardware raid. Each system con read and write locally or to the 10G iscsi by more than 200 MB/s. Now I have to transfer backups form A to B and doing this with rsync always stuck at +- 48-50MB/s no matter which options, compressions, encryption etc I use. Even the plain default...

...h of small files in a doubly-tiered sha1 hash fanout directory structure. The directories themselves aren't overly full. Most of the data we write to gluster is "write once, read probably never", so 99% of all operations are of the write variety. The network between servers is sound. 10gb network cards run over a 10gb (doh) switch. iperf reports 9.86Gbit/sec. ping reports a latency of 0.1 - 0.2 ms. There is no firewall, no packet inspection and no nothing between the servers, and the 10gb switch is the only path between the two machines, so traffic isn't going over some 2mbit wi...

Hi forks: I've been testing SMB2 with samba 3.6.4 performance these days, and I find a weird benchmark that SMB2 write performance is slower than SMB1 in 10Gb ethernet network. Server ----------------------- Linux: Redhat Enterprise 6.1 x64 Kernel: 2.6.31 x86_64 Samba: 3.6.4 (almost using the default configuration) Network: Chelsio T4 T420-SO-CR 10GbE network adapter RAID: Adaptec 51645 RAID Controller (Writeback RAID0 with 16 * 1TB SATA II disks) Files...

...he use of the server. I currently have a quad core intel system running 8GB of RAM with 1 TB hard drive (single). In the past as a FreeBSD user, I have always made a physical volume of the root filesystem (/), SWAP, /tmp, /usr, /var, and /home. In the partitioning manager I would always specify 10GB for root, 2GB or so for SWAP, 20GB var, 50GB usr, 10GB /tmp, and allocate all remaining space to my home directory as my primary data volume (assuming all my applications are installed and ran from my home directories). I was recently told that this is an old style of partitioning and is not us...

just to verify basic facts: Did you cross check vie network sniff, on which SMB protocol versions Server + Win 7 clients agree ? Or did you pin down via registry ? AFAIK only starting with win 8 or win 10 clients you could ask with powershell, which protocol version is in use. Did you also cross check samba logs for a name resolution issue ( windows names, not DNS) if one of your boxes is an

Hi, I am trying to configure two identical systems with the following setup. dom0: Centos 6 OS on Apple Xserve i7 server with PCI cards for 4GB FC (LSI FC949ES) and 10GB Ethernet (Intel 82598EB) dom1: Centos 5 OS with passthru mode of PCI 4GB FC and 10GB Ethernet (ixgbe and mptfc blacklisted in dom0) Everything starts ok, but networking in dom1 using the 10GB interface has extremely high rtt w/ping tests (20-30ms avg). I've tried a few tweaks I've disco...

...s ecryptfs_key_bytes=16 ecryptfs_cipher=aes ecryptfs_sig=29acec13662d2e8f Mounted eCryptfs * * Start the samba service * # /etc/init.d/samba start On windows 10 Client . ------------------------------- * Connected to network device of the ubuntu host * Ran robocopy of file 10GB to the network share * C:\Users\machine-412>robocopy E:\ Z:\ 10G.tst ------------------------------------------------------------------------------- ROBOCOPY :: Robust File Copy for Windows ------------------------------------------------------------------------------- Started...

Hi, Filesystem is a XFS. The source file isn't a sparse file, but have big chunks of \0's. $ ls -lh probeta.vdi -rw------- 1 djgera djgera 11G 2008-09-14 02:47 probeta.vdi $ ls -l probeta.vdi -rw------- 1 djgera djgera 10737459712 2008-09-14 02:47 probeta.vdi $ du -h probeta.vdi 11G probeta.vdi when copy with $ rsync -aSv --progress probeta.vdi test-sparse.vdi sending incremental

Greetings: I'm planning to set up a test Centos 6.0 box (has CDROM, but no DVD) with these partions: / 10GB ( no separate mount for /usr ) /tmp 1GB /var 10GB /boot 500MB The centos mirrors I have seen do not provide the full distro on CD (this box has no DVD). I'm used to having about 6 CD isos to work with. The livecd install to hard drive works, but apparently...

...  ecryptfs_unlink_sigs   ecryptfs_key_bytes=16   ecryptfs_cipher=aes   ecryptfs_sig=29acec13662d2e8f Mounted eCryptfs Start the samba service # /etc/init.d/samba start On windows 10 Client . -------------------------------  Connected to network device of the ubuntu host Ran robocopy of file 10GB to the network share C:\Users\machine-412>robocopy  E:\ Z:\ 10G.tst -------------------------------------------------------------------------------    ROBOCOPY     ::     Robust File Copy for Windows -------------------------------------------------------------------------------   Started...