Displaying 20 results from an estimated 27 matches for "56ff".
2023 Nov 06
3
[Bug 3631] New: ssh fe80 -b invalid argument failure
...allow to bind to a local fe80 address if the
address is specified with the option -b <ipv6-addr>. It though works
when specifying it with -B <interface>
The following is from a ubuntu 22.04 trying to connect to another
ubuntu 22.04.
We will use the local eth0 inet6 address fe80::250:56ff:fe00:243d for
binding:
vmadmin at li224-vmLS1:~$ ip add
...
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
state UP group default qlen 1000
link/ether 00:50:56:00:24:3d brd ff:ff:ff:ff:ff:ff
altname enp3s0
altname ens160
inet 192.168.110.61/24 brd 192.168....
2019 May 20
1
[Bug 1338] New: Can't add IPv6 concatenation rule
...major
Priority: P5
Component: nfnetlink_queue
Assignee: netfilter-buglog at lists.netfilter.org
Reporter: abrian at netapp.com
Attempting to add an ip6 address in a concatenation fails:
nft add rule inet filter input ip6 saddr . udp dport
fd20:332:332:0:250:56ff:fe87:f635 . 1662 counter accept
<cmdline>:1:1-112: Error: Could not process rule: Value too large for defined
data type
add rule inet filter input ip6 saddr . udp dport
fd20:332:332:0:250:56ff:fe87:f635 . 1662 counter accept
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^...
2013 Jan 28
1
The RPC server is unavailable on Samba 4 clients
...13 NZDT
ldb_wrap open of secrets.ldb
Terminating connection - 'ldapsrv_call_loop: tstream_read_pdu_blob_recv() -
NT_STATUS_CONNECTION_DISCONNECTED'
single_terminate: reason[ldapsrv_call_loop: tstream_read_pdu_blob_recv() -
NT_STATUS_CONNECTION_DISCONNECTED]
added interface eth0 ip=fe80::250:56ff:fe00:e2e3%eth0
bcast=fe80::ffff:ffff:ffff:ffff%eth0
netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.93.5 bcast=192.168.93.255
netmask=255.255.255.0
ldb_wrap open of secrets.ldb
Kerberos: AS-REQ win7test-pc$@GAARA.KAZEKAGE.NET from ipv4:
192.168.93.112:49282 for
krbtgt/GAARA.KAZEKAGE.N...
2013 Aug 23
1
[Bridge] challenge of year: connect to LAN using wireless-ap over bridge + unmanaged l2tpv3 tunnel + bridge? it's possible?
...-------------------+
*root at bahia:~# * ip -d addr show eth0 *# WAN*
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:50:56:a7:13:49 brd ff:ff:ff:ff:ff:ff
inet 200.243.1.5/24 brd 200.243.1.255 scope global eth0
inet6 fe80::250:56ff:fea7:1349/64 scope link
valid_lft forever preferred_lft forever
*root at bahia:~# * ip -d addr show eth1 *# LAN (VLAN/TRUNK)*
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:50:56:a7:13:4a brd ff:ff:ff:ff:ff:ff
inet6 fe80::2...
2011 Feb 18
0
getpeername failed. Error was Transport endpoint is not connected
...rite failure in
writing to client 0.0.0.0. Error Connection reset by peer
Is it a problem ? or just an informative event ?
Feb 18 18:13:42 samba smbd[21646]: [2011/02/18 18:13:42.423085, 2]
lib/interface.c:340(add_interface)
Feb 18 18:13:42 samba smbd[21646]: added interface eth0
ip=fe80::250:56ff:fe97:3374%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0
netmask=ffff:ffff:ffff:ffff::
Feb 18 18:13:42 samba smbd[21646]: [2011/02/18 18:13:42.423232, 2]
lib/interface.c:340(add_interface)
Feb 18 18:13:42 samba smbd[21646]: added interface eth0
ip=192.168.200.2 bcast=192.168.200.255 netmask=255.255.2...
2012 May 17
1
Puppet facter 1.6.8 and inet6 addresses
...6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff
inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0
*inet6 fe80::250:56ff:fe99:7335/64* scope link
valid_lft forever preferred_lft forever
But with facter run as root I don''t get any inet6 adress
facter | grep addr
ipaddress => 10.66.112.71
ipaddress_eth0 => 10.66.112.71
ipaddress_lo => 127.0.0.1
macaddress => 00:50:56:99:73:35
macaddress_e...
2014 Aug 31
1
CentOS7 Minimal installation on Vmware missing network interface
...st
interface but not the second one and I don't know how to enable it. If I
run the command ifconfig -a this is what I see:
eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.112 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::250:56ff:fe2e:e245 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:2e:e2:45 txqueuelen 1000 (Ethernet)
RX packets 126 bytes 17122 (16.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 83 bytes 12627 (12.3 KiB)
TX errors 0 dropped 0 overruns 0...
2017 Sep 27
1
anaconda not installing to sda?
I'm having what appears at first glance to be a kickstart+anaconda issue on CentOS 7.4.
As near as I can tell in the program.log in the anaconda environment, the partitioning instructions downloaded with the kickstart from cobbler appear to simply not be applied. Then /mnt/sysimage is not mounted, the logs are not copied to /mnt/sysimage/root and the installation stalls due to the anamon
2012 Jun 20
8
Winbind Daemon fails to start, group shares no longer functioning
...+0xfd) [0x7f6fc03eecdd]
#12 winbindd(+0xccf19) [0x7f6fc30daf19]
dumping core in /var/log/samba/cores/winbindd
Aborted (core dumped)
-------------- next part --------------
pm_process() returned Yes
adding IPC service
Substituting charset 'UTF-8' for LOCALE
added interface eth0 ip=fe80::250:56ff:fe9a:d14%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=10.10.32.88 bcast=10.10.39.255 netmask=255.255.248.0
Netbios name list:-
my_netbios_names[0]="SAMBA"
added interface eth0 ip=fe80::250:56ff:fe9a:d14%eth0 bcast=fe80::ffff:ffff:ffff:fff...
2011 Nov 10
5
Problem with kerberos method attribut
Hi;
?
I would like to use a samba configuration with :
?
dedicated keytab file = /etc/krb5.keytab
kerberos method = system keytab
security = ADS
?
But when I test the configuration (testparm) I have the following error msg :
?
Load smb config files from /etc/samba/smb.conf
Unknown parameter encountered: "dedicated keytab file"
Ignoring unknown parameter "dedicated keytab file"
2016 Apr 20
2
Asterisk 13.1-cert6 Now Available
The Asterisk Development Team has announced the release of Certified
Asterisk 13.1-cert6.
This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/certified-asterisk
The release of Certified Asterisk 13.1-cert6 resolves several issues
reported by the community and would have not been possible without your
participation.
Thank you!
The following are the
2012 Aug 11
2
IPv6 on Centos 6
...NAME="System eth0"
IPV6_AUTOCONF=no
IPV6ADDR=2607:f678::16:66/64
IPV6_DEFROUTE=yes
<centos666.peak.org> [28] # ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:56:98:70:8B
inet addr:207.55.16.66 Bcast:207.55.19.255 Mask:255.255.252.0
inet6 addr: fe80::250:56ff:fe98:708b/64 Scope:Link
inet6 addr: 2607:f678::16:66/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1862 errors:0 dropped:0 overruns:0 frame:0
TX packets:266 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueue...
2014 Feb 25
1
Multicast packages dropped
...rface, but I am only able to send updates through the GRE tunnel not receive them.
All interfaces are multicast enabled:
eth0 Link encap:Ethernet Hardware Adresse 00:50:56:B8:27:52
inet Adresse:10.139.10.2 Bcast:10.139.10.255 Maske:255.255.255.0
inet6 Adresse: fe80::250:56ff:feb8:2752/64 G?ltigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7190594 errors:0 dropped:0 overruns:0 frame:0
TX packets:6209862 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl?nge:1000...
2020 Jan 13
2
GPO
...pe host lo
> inet6 ::1/128 scope host
> 2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen
> 1000
> link/ether 00:50:56:b9:45:29 brd ff:ff:ff:ff:ff:ff
> inet 172.18.68.7/26 brd 172.18.68.63 scope global ens192
> inet6 fe80::250:56ff:feb9:4529/64 scope link
> -----------
> Checking file: /etc/hosts
> 127.0.0.1 localhost localhost.localdomain
> 172.18.68.7 CCMG7.eccmg.cupet.cu CCMG7
> Checking file: /etc/resolv.conf
> search eccmg.cupet.cu
> nameserver 172.18.68.7
> -----------
> Checking file: /etc/kr...
2019 Dec 04
2
security = ads parameter not working in samba 4.9.5
...7.0.0.1/8 scope host lo
inet6 ::1/128 scope host
2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 00:50:56:85:24:4c brd ff:ff:ff:ff:ff:ff
inet 10.34.54.152/24 brd 10.34.54.255 scope global ens192
inet6 fe80::250:56ff:fe85:244c/64 scope link
-----------
Checking file: /etc/hosts
127.0.0.1 localhost
#127.0.1.1 debian01.emea.media.global.loc debian01
10.34.54.152 esmad1apl01.emea.media.global.loc esmad1apl01
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip...
2020 Jan 10
16
GPO
I really do not know what to do so that GPOs can be created, I have tried all the possible solutions that have been sent to me but without success.
2014 Feb 26
0
samba4 as domain ad member
...ap config *:range = 70001-80000
doing parameter idmap config *:backend = tdb
[2014/02/26 16:08:11.050798, 4] ../source3/param/loadparm.c:4814(lp_load_ex)
pm_process() returned Yes
[2014/02/26 16:08:11.050898, 2] ../source3/lib/interface.c:341(add_interface)
added interface em1 ip=fe80::fab1:56ff:feac:2344%em1 bcast=fe80::ffff:ffff:ffff:ffff%em1 netmask=ffff:ffff:ffff:ffff::
[2014/02/26 16:08:11.051217, 2] ../source3/lib/interface.c:341(add_interface)
added interface em1 ip=10.128.37.116 bcast=10.128.37.255 netmask=255.255.255.0
[2014/02/26 16:08:11.051254, 5] ../source3/lib/util_names....
2020 Jan 13
0
Create OU with address details
...inet6 ::1/128 scope host
> 2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP group default qlen 1000
> link/ether 00:50:56:b9:45:29 brd ff:ff:ff:ff:ff:ff
> inet 172.18.68.7/26 brd 172.18.68.63 scope global ens192
> inet6 fe80::250:56ff:feb9:4529/64 scope link
> -----------
> Checking file: /etc/hosts
> 127.0.0.1 localhost localhost.localdomain
> 172.18.68.7 CCMG7.eccmg.cupet.cu CCMG7
> Checking file: /etc/resolv.conf
> search eccmg.cupet.cu
> nameserver 172.18.68.7
> ----...
2019 Jun 20
2
DLZ Backend DNS Hosed
....0.0.1/8 scope host lo
? ? inet6 ::1/128 scope host?
2: ens32: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
? ? link/ether 00:50:56:a5:50:b3 brd ff:ff:ff:ff:ff:ff
? ? inet 192.168.3.203/24 brd 192.168.3.255 scope global ens32
? ? inet6 fe80::250:56ff:fea5:50b3/64 scope link?
-----------
? ? ? ?Checking file: /etc/hosts
127.0.0.1 localhost
192.168.3.203 umbriel.samdom.mycompany.net umbriel
# The following lines are desirable for IPv6 capable hosts
::1 ? ? localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
--...
2019 Nov 29
5
security = ads parameter not working in samba 4.9.5
...7.0.0.1/8 scope host lo
inet6 ::1/128 scope host
2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 00:50:56:85:24:4c brd ff:ff:ff:ff:ff:ff
inet 10.34.54.152/24 brd 10.34.54.255 scope global ens192
inet6 fe80::250:56ff:fe85:244c/64 scope link
-----------
Checking file: /etc/hosts
127.0.0.1 localhost
127.0.1.1 debian01.emea.media.global.loc debian01
10.34.54.152 esmad1apl01.emea.media.global.loc esmad1apl01
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip...