Puppet users - May 2012 - Puppet facter 1.6.8 and inet6 addresses

Hello,

when running the command "ip a" on a debian VM, I get this

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
    link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff
    inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0
    *inet6 fe80::250:56ff:fe99:7335/64* scope link
       valid_lft forever preferred_lft forever

But with facter run as root I don''t get any inet6 adress

facter | grep addr

ipaddress => 10.66.112.71
ipaddress_eth0 => 10.66.112.71
ipaddress_lo => 127.0.0.1
macaddress => 00:50:56:99:73:35
macaddress_eth0 => 00:50:56:99:73:35

I''m using facter v1.6.8

Could you please tell me how to get the IPv6 adresse using facter ?

Thanks in advance
Best regards,
Christophe

-- 
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/9Xpu5DvWYTEJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.

----- Original Message -----
> From: "Christophe L" <cl.subscription@gmail.com>
> To: puppet-users@googlegroups.com
> Sent: Thursday, May 17, 2012 2:36:49 PM
> Subject: [Puppet Users] Puppet facter 1.6.8 and inet6 addresses
> 
> Hello,
> 
> when running the command "ip a" on a debian VM, I get this
> 
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP qlen 1000
> link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff
> inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0
> inet6 fe80::250:56ff:fe99:7335/64 scope link
> valid_lft forever preferred_lft forever
> 
> But with facter run as root I don''t get any inet6 adress
> 
> facter | grep addr
> 
> ipaddress => 10.66.112.71
> ipaddress_eth0 => 10.66.112.71
> ipaddress_lo => 127.0.0.1
> macaddress => 00:50:56:99:73:35
> macaddress_eth0 => 00:50:56:99:73:35
> 
> I''m using facter v1.6.8
> 
> Could you please tell me how to get the IPv6 adresse using facter ?
Facter specifically do not report link local addresses.

-- 
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.