search for: 5405

...ever, I'm not getting the caller ID passed through with *. Sometimes I get a "failed checksum" like this:- -- Starting simple switch on 'Zap/1-1' Jul 30 16:06:14 NOTICE[9597]: callerid.c:306 callerid_feed: Caller*ID failed checksum Jul 30 16:06:15 NOTICE[9597]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... Jul 30 16:06:16 NOTICE[9597]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... Jul 30 16:06:18 NOTICE[9597]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... -- Executing Wait("Zap/1-1", "2") in new stack <snip&g...

...er, I'm not getting the caller ID passed through with *. Sometimes I get a "failed checksum" like this:- -- Starting simple switch on 'Zap/1-1' Jul 30 16:06:14 NOTICE[9597]: callerid.c:306 callerid_feed: Caller*ID failed checksum Jul 30 16:06:15 NOTICE[9597]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... Jul 30 16:06:16 NOTICE[9597]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... Jul 30 16:06:18 NOTICE[9597]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... -- Executing Wait("Zap/1-1", "2") in new stack <sni...

Hi all I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset Has anyone seen anything like this? I?ve tried specifying clocksource=xen in grub instead of the default of tsc, and that...

Hello! Please, help me, I''m totally lost choosing basic budget server for XEN. The variants are Sun (X2200 M2 or Sun X2250 M2) or maybe HP Proliant DL160 G5p. Or maybe some IBM server? Which X2200 configuration will perform better, two Opteron dual-core 22xx or single quad-core 23xx? Which one performing better nowadays, Opteron or Xeon? I know that 2-3 years ago Opteron was the

...ast datagrams correctly. I therefore attempted to force unicast communication by making the following changes from the distributed corosync.conf: transport: updu cluster_name: <set to the same as the domain> # crypto_cipher: none # crypto_hash: none # mcastaddr: 239.255.1.1 # mcastport: 5405 # ttl: 1 The following are unchanged: version: 2 secauth: off ringnumber: 0 bindnetaddr: 192.168.1.0 The nodelist is: ---------%<---------------- nodelist { node { ring0_addr: 192.168.1.2 nodeid: 1 } node { ring0_addr: 192.168.1.51 nodeid: 2 } node { ring0_addr: 192.168...

...n LLVM IR that integrates the verification framework that I'm developing: Marcelo Sousa, and Alper Sen, LLVMVF: A Generic Approach for Verification of Multicore Software. Journal of Electronic Testing: Theory and Applications, September 2013. ( http://rd.springer.com/article/10.1007/s10836-013-5405-9) Kind regards, Marcelo Sousa -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20130914/eec1ede1/attachment.html>

...fact that the calls were no more answered. ;-) The usecallerid = yes and the callerid=asreceived have been added and removed, but with no success. This is what I see on the CLI when calling the gsm unit: -- Starting simple switch on 'Zap/4-1' Feb 10 16:20:02 NOTICE[7409]: chan_zap.c:5405 ss_thread: Got event 17 (Polarity Reversal)... Feb 10 16:20:06 NOTICE[7409]: chan_zap.c:5405 ss_thread: Got event 2 (Ring/Answered)... -- Executing NoOp("Zap/4-1", "GSM Gateway Call from: ") in new stack -- Executing Dial("Zap/4-1", "Zap/1|30") in new...

I have a mail server with postfix, dovecot (1.2.15) and deliver lda (dovecot) with 350 users. I have the problem that in this christmas the employees are sending some big files (mainly powerpoints files) to a lot of recipients, because of that the server get a lot of charge (is a Xeon quad core 5405 with 4GB of Ram), i have four disks in Raid 5 configuration (HP E200 controller, not very fast) Is there any option to limit this type of delivery, the total size of the mails delivered to each user (total recipients * size of mail), in dovecot deliver. I don't want to limit the concurrent deli...

On Sun, Apr 2, 2017 at 9:22 PM, Sarah Newman <srn at prgmr.com> wrote: > On 04/02/2017 02:49 AM, Chris Elliott wrote: >> Hi all >> >> I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel >> 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset >> >> Has anyone seen anything like this? >> >> I?ve tried specifying clocksource=xen in gr...

...hain POSTROUTING SNAT all -- * eth1 0.0.0.0/0 0.0.0.0/0 to:217.58.51.162 SNAT all -- * eth3 0.0.0.0/0 0.0.0.0/0 to:81.121.243.250 SNAT tcp -- * eth0 0.0.0.0/0 192.168.254.10 tcp dpt:1723 to:192.168.254.1 [mangling occurs only on ports 3085, 5405, 5421 so that rule 30 (fwmark) does nothing here. ] I guess the problem is the routing table of the packet coming back from SRV_XP: the ack packet does take a routing table different from the 1^ incoming packet. I added SNAT thinking to avoid asymmetric routing (income via adsl...

...n't have a lot of opportunities to just keep trying things out! Many thanks in advance Christoph -- ******************************************************************************************* Christoph Witzig christoph.witzig@opit.ch OPIT Solutions AG T?fernstr. 11 CH-5405 Baden-D?ttwil Tel: +41 56 484-8000 / Fax: +41 56 484-8001 / Web: www.opit.ch *******************************************************************************************

Hi All, I have the following scenario, it may already have been answered elsewhere, but I cant find the solution. I already have a PBX and would like to start implementing asterisk. I have ordered a 4 port card from the asterisk store (2 port FXS and 2 port FXO) and am waiting for it to arrive. I do not want to plug my incoming lines into my FXO ports yet as not all the desks have IP phones

On 04/02/2017 02:49 AM, Chris Elliott wrote: > Hi all > > I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel > 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset > > Has anyone seen anything like this? > > I?ve tried specifying clocksource=xen in grub instead of the...

On 04/03/2017 04:20 AM, George Dunlap wrote: > On Sun, Apr 2, 2017 at 9:22 PM, Sarah Newman <srn at prgmr.com> wrote: >> On 04/02/2017 02:49 AM, Chris Elliott wrote: >>> Hi all >>> >>> I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel >>> 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset >>> >>> Has anyone seen anything like this? >>> >>> I?ve tried specifying c...

...able(file="C:/Program Files/R/R-2.2.1/Projects/Stats EU/Expected input.txt") > y=read.table(file="C:/Program Files/R/R-2.2.1/Projects/Stats EU/Observed input.txt") > chisq.test(x,y) Pearson's Chi-squared test data: x X-squared = 4.4602, df = 5405, p-value = 1 Warning message: Chi-squared approximation may be incorrect in: chisq.test(x, y) Maybe the scan() function is more correct?? Using this I got: > x=scan(file="C:/Program Files/R/R-2.2.1/Projects/Stats EU/Observed input.txt") Read 5568 items &g...

...l though the FXO card to any telephone number and talk both ways - Touch tones can be heard from IP Phone. Phone Line: If I dial the number associated with the FXO Card - it does answer and I can use the demo - all functions work On the Console: Repeated message: NOTICE[1125329600]: chan_sip.c:5405 handle_request: Registration from "<sip:1001@192.168.1.198>' failed for '192.168.1.197' DEBUG[1125329600]: chan_sip.c:574 __sip_ack: Stopping retransmission on 'and some long numbers' Thanks Bart -------------- next part -------------- An HTML attachment was scrubbe...

...the problem). Anyway, iaxcomm registers with the Asterisk server correctly and I see the period refresh of the positive authentication. He can receive calls fine. But, when he goes to place a call or do anything with a command, I see the following: Dec 22 23:14:21 NOTICE[22005]: chan_iax2.c:5405 socket_read: Rejected connect attempt from XX.XX.XX.XX I'm confused by this. I thought that if you were authenticated, you could send commands to the server. Is this not the case? Does the server try to connect back to the client for verification and, failing that, reject? I've tr...

About once a day I have noticed a phantom incoming call with a caller ID of asterisk@192.168..<cut off>. When I answer the call there is a dial tone and the call is disconnected. Any clues? David Koski david.nospham@kosmosisland.com

...is issue. Where are my conf, just in case. Any idea please bring it up. root at asterisk-slb01:~# cat /etc/ais/openais.conf # Please read the openais.conf.5 manual page totem { version: 2 secauth: off threads: 0 interface { ringnumber: 0 bindnetaddr: 192.168.1.0 mcastaddr: 226.94.1.1 mcastport: 5405 } } logging { to_stderr: yes to_file: yes logfile: /tmp/ais debug: off timestamp: on } amf { mode: disabled } root at asterisk-slb01:~# cat /etc/asterisk/ais.conf [device_state] type=event_channel publish_event=device_state subscribe_event=device_state -------------- next part -------------- An...

...the same LAN box A: 192.168.142.246 asterisk 1.6.2.13 BoxB: 192.168.142.248 asterisk 1.8.0 openais.conf: # Please read the openais.conf.5 manual page totem { version: 2 secauth: off threads: 0 consensus: 4800 interface { ringnumber: 0 bindnetaddr: 192.168.142.0 mcastaddr: 226.94.1.1 mcastport: 5405 } } logging { to_stderr: yes debug: on timestamp: on to_file: yes to_syslog: no syslog_facility: daemon logfile: /var/log/openais.log } amf { mode: disabled } When I load res_ais.so module, the pbx crash (boths) Some time not crash but no clusters members are present. What I'm doing wrong?...