search for: 53c1030

Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be

...rs should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about tape drive, e.g. SCSI ID. However none of them happened in my case! (document: "UP LTO Ultrium 2-3 - Unix Config Guide") The SCSI adapter is an LSI53C1030. The system has another the same adapter which is used for hard disk drives. The interesting part is, the hard disk are detected and even OS boots from them, but I can't make the tape drive work. Moreover, in system boot up, LSI SCSI BIOS displays informations saying there is a tape drive con...

...e" found: kernel tainted. SCSI subsystem initialized Loading sd_mod.ko module Loading mptbase.ko module Fusion MPT base driver 3.01.20 Copyright (c) 1999-2004 LSI Logic Corporation ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 18 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator,Target} ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 19 (level, low) -> IRQ 19 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator,Target} Loading mptscsih.ko module Fusion MPT SCSI Host driver 3.01.20 scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports...

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives,...

...y0 at cas0 phy 1: BCM5421 10/100/1000baseT PHY, rev. 1 "ppm" at mainbus0 not configured schizo1 at mainbus0: "Tomatillo", version 4, ign 740, bus B 0 to 0 schizo1: dvma map c0000000-dfffffff, iotdb 552c000-55ac000 pci1 at schizo1 mpi0 at pci1 dev 2 function 0 "Symbios Logic 53c1030" rev 0x08: ivec 0x740 scsibus0 at mpi0: 16 targets, initiator 7 schizo2 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 0 schizo2: dvma map c0000000-dfffffff, iotdb 5694000-5714000 pci2 at schizo2 ebus0 at pci2 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 "...

My application always needs to sync file data after writing. I don't want anything handing around in the kernel buffers. I am wondering what is the best method to accomplish this. 1. Do I use EXT2 and use fdatasync() or fsync()? 2. Do I use EXT2 and mount with the "sync" option? 3. Do I use EXT2 and use the O_DIRECT flag on open()? 4. Do I use EXT3 in full journaled mode,

Hi, I am using the db backend for the expire plugin and found the following error message in the logfile: dovecot: Jan 22 10:10:55 Error: dict: secondary db: unable to allocate space from the buffer cache dovecot: Jan 22 10:10:55 Error: dict: Failed to initialize dictionary 'expire' dovecot: Jan 22 10:10:55 Error: IMAP(xxxxxxxxxx): read(/var/dovecot/dict-server) failed: Remote

...channels, the issue does not exist. The disk controller and the Zap card do not share an interrupt (The zap card has its own interrupt - not shared with anything). We're running a version of CVS HEAD from 04/09/05 on a Dell PE 1600SC with a U320 SCSI, Raid 1 (LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI), with a TE410P connected to a PRI. Has anybody experienced anything similar? Anybody have a clue as to what's going on? Zttool does show 15 IRQ misses, but that is over the course of the past week, and after new incidents the number of misses sta...

hello, i am very new to centos and experienced some trouble yesterday when installing centos 5 onto our workgroup server. Our Server is equipped with an external RAID-array using an LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) SCSI controller. Unfortunately the Server won't boot with the array connected, but gives the error message: target1:0:2: Domain Validation detected failure, dropping back again and again. The now deleted SuSE 9.2 distribution (kernel 2.6.11),...

...iver with OnStream support version 0.99.1 osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $ Fusion MPT base driver 3.01.09 Copyright (c) 1999-2004 LSI Logic Corporation ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 28 (level, low) -> IRQ 53 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} ACPI: PCI interrupt 0000:06:02.1[B] -> GSI 29 (level, low) -> IRQ 54 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.01.09 scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=53 Using anticipa...

...rep "(Ether|SCSI)" 07:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 07:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 08:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08) # uname -a Linux salvador.ic.unicamp.br 2.6.18-164.6.1.el5xen #1 SMP Tue Nov 3 16:48:13 EST 2009 x86_64 x86_64 x86_64 GNU/Linux # domU-with-NIC.cfg kernel = "/boot/vmlinuz-2.6.18-164.6.1.el5xen" ramdisk = "/boot/initrd-2.6.18-164.6.1....

Everyone, about 4 years ago, I tried to install CentOS 6 on a Supermicro server with SCSI drives using a LSI raid system. I could never figure out or find a way to make the installation disc of Centos 6 identify the SCSI drives. The installation disc for Centos 5 identified the SCSI drives without a problem. I finally gave up on Centos 6 and installed Centos 5 and the system has worked very

Hello! After upgrade to version 2.0, now using 2.0.1, I'm experiencing problems with glusterfs stability. I'm running 2 node setup with cliet side afr, and glusterfsd also is running on same servers. Time to time glusterfs just hangs, i can reproduce this running iozone benchmarking tool. I'm using patched Fuse, but same result is with unpatched.

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

Hi! I''ve 5 DSL routers and a linux router in a switch. The linux router is doing NAT for a LAN network, but it freezes when I set up load balancing with this command: ip route add default proto static\ nexthop via 192.168.1.10 dev eth1\ nexthop via 192.168.1.20 dev eth1\ nexthop via 192.168.1.30 dev eth1\ nexthop via 192.168.1.40 dev eth1\ nexthop

...daptec aacraid driver (1.1.2-lk2 Sep 1 2005) 3ware Storage Controller device driver for Linux v1.26.02.001. Fusion MPT base driver 3.01.20 Copyright (c) 1999-2004 LSI Logic Corporation ACPI: PCI Interrupt 0000:22:01.0[A] -> GSI 96 (level, low) -> IRQ 19 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator,Target} ACPI: PCI Interrupt 0000:22:01.1[B] -> GSI 97 (level, low) -> IRQ 20 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator,Target} Fusion MPT SCSI Host driver 3.01.20 scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=19 Vend...

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

Hello, I''m facing a strange issue with network card PCI passthrough on my openwrt test domU. - With network PCI passthrough, DNS lookup failed for some domains (exemple, google.com) but not for other (free.fr my ISP, or my domain jbfavre.org). I can ping an IP address without any problem. - Starting domU as a "normal" (ie without PCI passthrough), no problem. As far as I can

...CH5: IDE controller at PCI slot 0000:00:1f.1 ICH5: chipset revisioRed Hat/Adaptec aacraid driver (1.1.2-lk2 Jun 9 2005) 3ware Storage Controller device driver for Linux v1.26.02.000. Fusion MPT base driver 3.01.18 Copyright (c) 1999-2004 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery Fusion MPT SCSI Host driver 3.01.18 scsi0 : ioc0: LSI53C1030, FwRev=0...

I''m tracking performance on the machine I installed yesterday. mutt running on one Xen instance, accessing via imap to another instance, accessing via nfs the maildir in another instances, seems little laggy when moving up and down the message index list. Network latency seems low < 30ms on average. So I was tracking vmstat. On the mutt instances is seems reasonable: [nic@shell:~]