search for: 5110

...for that). We must get a PPD for our printer (installed on the linux server) from the www.linuxprinting.org, click the "Browse" button and select that PPD. After that you'll have a new printer installed an all will work like a charm. Note: Inside the PPD of my printer (HP OfficeJet 5110) I had these line (despite all the others :) ): *ShortNickName: "HP OfficeJet 5110, hpijs" *NickName: "HP OfficeJet 5110, Foomatic + hpijs (recommended)" On the instalation of the Adobe drivers I had erros saying my printed had illegal chars on it's name. So, I've...

Hi everyone, First of all a big thank you for the NUT package, I've been using it for years and couldn't get by without it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just purchased is using the new bcmxcp_usb from 2.0.4 ... which brings me to the point of the post.....

Hi, I'm having trouble with nut running on feisty. I have a powerware 5110 connected using USB i did an "sudo lsusb -a" before and after i plugged in the powerware usb cable and did a diff on the results of the two which was: -- 322c322 < Port 2: 0000.0100 power --- > Port 2: 0001.0301 C_CONNECT lowspeed power connect -- current ups.conf is: -- [p...

Hi, I have an UPS Powerware 5110 ( usb connection ), on Linux OS is Debian 4.0 The /etc/ups.conf file setting is: [myups] driver = bcmxcp_usb port = auto desc = "UPS Powerware 5110 1500 VA" When the daemon starts it displays the following message: "Starting Network UPS Tools: (upsdrvctl failed).&quo...

Hi All, I have a powerware UPS 5110 connected to an openindiana server with the bcmxcp_usb driver and running nut 2.65 compiled and installed as root to avoid permission issues. On running the following debug code to test the UPS's communication it fails at the same time with the following error. ./bcmxcp_usb -u root -DD...

Hi, OS: FreeBSD 9.0-RELEASE NUT version: nut-2.6.5_1 (installed from ports) UPS: Eaton powerware 5110 Can you help me with this device, please? [root at mail /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -DDDD -a eaton Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 debug level is '4' 0.001239 upsdrv_initups... 0.001958 Ch...

Hi all, I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and configured nut appropriately. The cgi scripts are working fine, but on upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all blank - and there are no entries for these values in the 'All data' tree. I've checked the man page for bcmxcp_us...

Nut for Windows 2.6.3-3 + Eaton/PW 5110 (103004256-5591). I had to manually install libusb driver and I'm using bcmxcp_usb. upsd.exe is reporting to me "Out of memory". It will run, but once anything connects to the daemon, it dies with that message. I don't have much experience with NUT yet so I'm not sure what...

Hi all, I've got a Powerware 5110 UPS that I'm trying to set up with nut in Ubuntu. I've installed nut and configured the first two files: $ cat /etc/nut/nut.conf MODE=standalone $ cat /etc/nut/ups.conf [pw5110] driver = bcmxcp_usb port = auto # port = /dev/bus/usb/002/002 When I try to test this configuration with the...

...es it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. - Tim On 02/12/2014 06:46 PM, Greg Vickers wrote: > Hi all, > > I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and > configured nut appropriately. The cgi scripts are working fine, but on > upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all > blank - and there are no entries for these values in the 'All data' tree. > > I've checked the m...

...s I have about the problem(s) ... Recently I've tried to port NUT to the hardware router Asus WL-500g Deluxe (http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GD), that runs OpenWRT Linux distribution (http://www.openwrt.org) based on Linux 2.4.30 kernel, in order to support my Powerware 5110 UPS (through USB interface). Basically, the port was very easy, though the hardware seems to be quite different from the "usual" PC (thanks to all developers for their efforts in writing portable code! ;-) However, I had some issues with making bcmxcp_usb driver to work, most of them is...

...6028]: chan_zap.c:2933 zt_setoption: Set option TDD MODE, value: OFF(0) on Zap/4-1 Nov 20 20:49:32 DEBUG[6028]: chan_zap.c:1523 update_conf: Updated conferencing on 4, with 0 conference users -- Hungup 'Zap/4-1' pbx*CLI> ---- On Trying to make an outgoing call Nov 20 20:51:48 DEBUG[5110]: chan_sip.c:7291 check_user_full: Setting NAT on RTP to 0 Nov 20 20:51:48 DEBUG[5110]: chan_sip.c:1415 __sip_ack: Stopping retransmission on '000f2300-08d000f6-4f620267-55399868 at 192.168.1.161' of Response 101: Match Found Nov 20 20:51:48 DEBUG[5110]: chan_sip.c:7291 check_user_full: Set...

Hi, I am wanting to use NUT to connect to an Eaton Powerware 5110 UPS using USB to connect. - I am using NUT 2.0.2 - I have compiled it with USB support - I can see that the UPS is registered as connecting in /var/log/messages eg usb 3-1: USB disconnect, address 3 usb 3-2: new low speed USB device using uhci_hcd and address 4 But I don'...

...ding information, what am I looking for? :) > Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > >> On 02/12/2014 06:46 PM, Greg Vickers wrote: >>> Hi all, >>> >>> I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and >>> configured nut appropriately. The cgi scripts are working fine, but on >>> upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all >>> blank - and there are no entries for these values in the 'All data' tree. > Gre...

...nd had to do some gentle remapping to get things to work correctly. Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > On 02/12/2014 06:46 PM, Greg Vickers wrote: >> Hi all, >> >> I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and >> configured nut appropriately. The cgi scripts are working fine, but on >> upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all >> blank - and there are no entries for these values in the 'All data' tree. Greg, From http://...

...rk UPS Tools - UPS driver controller 2.7.2.6_RTD ... > 0.000137 Shutdown UPS: rtdups > 0.000160 exec: /usr/local/ups/bin/usbhid-ups -a rtdups -k > Network UPS Tools - Generic HID driver 0.39 (2.7.2.6_RTD) > USB communication driver 0.32 > Can't claim USB device [2a37:5110]: No such file or directory > 0.007491 Driver failed to start (exit status=1) > ----------------------------------------------------------------------------------------------- Hello Bob, What happens if you execute the command /usr/local/ups/bin/usbhid-ups -a rtdups -k -DDD Best R...

Hi, I have set up a RaspberryPi computer to do monitoring of two UPSs. One is an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being monitored by another Linux (Ubuntu 12.04) computer, and I just copied and pasted in the relevant nut config and it works just fine with nut. I've tried to set up the Powerware 5110 with nut, and the bcmxcp_usb driver can't communicate with the 5110. Here are the de...

I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [root@b1 src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001:...

...ch log in/out as necessary. The phones are on extensions 5100-5104, with a special extension 5999 which just plays music. [HOME] is at home. It has internet access only through a Microsoft ISA 2003 firewall, and has a dynamic IP address. It has 1 SIP hardphone configured, and working, on extension 5110. I can add a second hardphone to verify that this (new build) server is working OK, but all of the messages indicate it's fine. What I want to do, obviously, is have ALL of the extensions (5XXX) "pretending" to be on the same PBX. i.e. if I dial 5100 (on [MASTER]) from 5110 (on [HOME...

...and also add support for sending more commands to the ups. The code changes are currently not part of any release, but they are in github, and some more are on the way. Would you be able to do some testing on your HP R3000 XR, with this updated driver ? I have only been able to test it on Eaton 5110 as of now. And your UPS seems a lot more feature rich. Regards Alf Hogemark