search for: 40w

...300 without drives.? If I can believe the seller, it has a AMD Opteron X3216 Dual-core (2 Core) 1.6GHz and 8GB Installed. It has 4 3.5" bays. and 1? "Media" bay? https://www.servertechsupply.com/873830-s01/ this could well be acceptable.? Got to find out power draw.? Looks like ~40W. Any input on issues of OS install?? Do I go with separate OS and data RAID1 sets? Also HPE is ClearOS.? I ran ClearOS6 for years before going with QNAP turnkey.? Perhaps current ClearOS is better, but it does not handle multi-domain email as I need.? Or it did not.? So I am going to install...

...unix 0xffff8807d398bb80 0t0 129040 socket libvirtd 3016 root 37r FIFO 0,8 0t0 129042 pipe libvirtd 3016 root 38w FIFO 0,8 0t0 129042 pipe libvirtd 3016 root 39r FIFO 0,8 0t0 129043 pipe libvirtd 3016 root 40w FIFO 0,8 0t0 129043 pipe libvirtd 3016 root 41r FIFO 0,8 0t0 129044 pipe libvirtd 3016 root 42w FIFO 0,8 0t0 129044 pipe if i destroy the doamin again and define them via "virsh define abcd.xml" and start t...

I'm replacing a home PBX with an Asterisk server that needs 2 Digium cards (one PCI, one PCIe). Right now I'm just using a spare desktop machine, but it's overkill in terms of size/power/heat/noise/CPU power. Does anyone know any cost-effective alternatives? -- Eric Cooper e c c @ c m u . e d u

...8bb80 0t0 129040 socket > libvirtd 3016 root 37r FIFO 0,8 0t0 129042 pipe > libvirtd 3016 root 38w FIFO 0,8 0t0 129042 pipe > libvirtd 3016 root 39r FIFO 0,8 0t0 129043 pipe > libvirtd 3016 root 40w FIFO 0,8 0t0 129043 pipe > libvirtd 3016 root 41r FIFO 0,8 0t0 129044 pipe > libvirtd 3016 root 42w FIFO 0,8 0t0 129044 pipe > > if i destroy the doamin again and define them via "virsh define abcd.xm...

> If you set lowbatt=70 then the behaviour you are seeing is normal. Don't > set lowbatt and you'll get the default manufacturer settings which is > LOWBATTERY at 30% charge level. > > Philippe Thanks for quick response! I realized this and forget this setting! For now I think that my box does not recognize signal about low battery - I'm only started to read SHUT

On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: > Hi there, > > I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. > > First issue: whatever I

I need a program that will just run everything at max so I can measure the max power used on some systems. My 'Kill a Watt' meter should show up early next week. SO run that CPU at max, using all memory, and keeping the harddrive spinning. I can jsut do pings on the lan card for it to stay awake. I have searched here and on the net and have come back with nothing.

Hi there, I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. First issue: whatever I set as the offdelay, seems to be ignored and the UPS just cuts the power about 2sec after receiving the

...module involved? Yes, USV is the German acronym for UPS, which I accidentally slipped in. > I know this sounds off-topic, but in the logs, the PercentLoad is > always 0. Is this actually the case, or is this a measurement error? That's a measurement error on the UPS. As a test I had a 40W lamp plugged into it and in later testing, I looked at its display, it was also showing a 0% load. It's rated for a max of 510W and I guess isn't very sensitive in the lower 2 digit watts. I plugged in another 50W lamp and then it finally started showing a 19% load. The equipment I inte...

...h: no no Prefetch Buffer: no no Post Write Buffer: no no Enabled: yes yes Simplex only: no no Cable Type: 80w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA PIO PIO PIO Address Setup: 30ns 120ns 30ns 120ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active:...

...d 3016 root 35u REG 0,37 0 4 /proc/xen/privcmd > libvirtd 3016 root 36u unix 0xffff8807d398bb80 0t0 129040 socket > libvirtd 3016 root 37r FIFO 0,8 0t0 129042 pipe > libvirtd 3016 root 38w FIFO 0,8 0t0 129042 pipe > libvirtd 3016 root 39r FIFO 0,8 0t0 129043 pipe > libvirtd 3016 root 40w FIFO 0,8 0t0 129043 pipe > libvirtd 3016 root 41r FIFO 0,8 0t0 129044 pipe > libvirtd 3016 root 42w FIFO 0,8 0t0 129044 pipe > > if i destroy the doamin again and define them via "virsh define abcd.xml" and start them then via "virsh start abcd", the number of libvir...