search for: 40c

http://babelmark.bobtfish.net/?markdown=%3Ca%2Bb%40c.org%3E&normalize=on Only Python markdown, Pandoc, discount and PEG markdown seem to get this 'right'. As a + is perfectly valid in email addresses, I'm going to fix this in my modules. This was reported to me via the cpan.org RT (37909), and I thought I'd share as it...

>> The tomshardware-guys (no gals would do this...) have removed the >> fans, and immersed the innards of the computer in a sealed cabinet >> filled with cooking oil. So they have a completely silent machine >> in 40C warm oil. Amazing... It certainly is. And, I suppose, this will work, for a while, as long as: The "sealed cabinet", has enough expansion capacity for the oil to expand from heating; Has enough surface area to effectively radiate the heat that is continuously generated, (else the tem...

Hello, I am using EC2 to launch several instances. On each instance, I perform the following commands yum -y install R (installs R-2.6) R CMD javareconf sleep 10 wget rpackage.tgz R CMD INSTALL rpackage.tgz Now, rpackage.tgz needs to be built with jni libraries. When the instance is fully up, i log in and check if rpackage was successfully installed and find out it wasn't. Running R CMD

dhanhurley <wineforum-user at winehq.org> wrote at Jun 10, 2010 6:30 AM > >Hi from Z?rich,Schweiz and a hot , humid day. Greetings from Sunny Tucson Arizona where the high today is expected to be over 40C. >The SCANNER,Canoscan LiDE 600F,is not detected by XSANE/SIMPLE SCAN. >It is probably detected :- here is the OUTPUT from TERMINAL COMMAND "sane-find-scanner -v" >***************************************************** >found USB scanner (vendor=0x04a9 [Canon], product=0x2224...

..._set > 00000401 l O .rodata 0000000b .str1 > 00000000 l O .data 00000004 frame_set > @@ -45,67 +45,67 @@ > 000000f8 l O .bss 00000001 copying_arguments.b > 000000fc l O .bss 00000004 new_reg_base_value > 000000f4 l O .bss 00000004 reg_base_value > -0000040c l O .rodata 00000010 __FUNCTION__.20810 > +0000040c l O .rodata 00000010 __FUNCTION__.20724 > 00000c60 l F .text 0000032e record_set > 00000100 l O .bss 00000004 reg_seen > 00000104 l O .bss 00000004 unique_id > -0000041c l O .rodata 0000000b __FUNCTION__.2...

Does anyone know of a cheap temperature sensor that will work with Linux? I don't need a fancy monitoring appliance, I just want a simple sensor that I can connect to one of my monitoring servers to let me know if the server room is getting hot. -- Bowie

Hi folks, I've got a very bizarre problem recurring when making calls with Polycom SoundPoint IP500 SIP phones and Asterisk. Sometimes when a call comes in to an IP500, one of the sides of the conversation is cut off (i.e. the caller can't hear the callee, or vice-versa). This isn't easily repeated, and rebooting the phone, or restarting Asterisk, doesn't seem to have an

https://bugs.freedesktop.org/show_bug.cgi?id=104621 Bug ID: 104621 Summary: Nouveau prevents booting on Pascal Gpu Product: Mesa Version: 17.3 Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Drivers/DRI/nouveau Assignee: nouveau at

I'm setting up this huge RAID 6 box. I've always thought of hot spares, but I'm reading things that are comparing RAID 5 with a hot spare to RAID 6, implying that the latter doesn't need one. I *certainly* have enough drives to spare in this RAID box: 42 of 'em, so two questions: should I assign one or more hot spares, and, if so, how many? mark

...+. No memory errors were found. I turned off swap. I unplugged the USB hard drive that I use to hold daily and weekly backups. It was being recognized as /dev/sda for some reason. Lm_sensors shows the processor running between 45 and 50C. Hddtemp shows the hard drives running between 35 and 40C. LM_Sensors does not produce valid data on fan speed, but a visual check shows all fans running normally and no build-up of dust. The system is behind a big UPS that runs several other systems. The UPS log file does not record any power failures and none of the other systems are rebooting at...

The saga continues. I've been tracking the interface changes and merging them with the refactoring work I'm doing. I got as far as building stage3 of llvm-gcc but the object files from stage2 and stage3 differ: warning: ./cc1-checksum.o differs warning: ./cc1plus-checksum.o differs (Are the above two ok?) The list below is clearly bad. I think it's every object file in the

From: Bruno Delbono <bruno.s.delbono at mail.ac> > I'm really sorry to start this thread again but I found something very > interesting I thought everyone should ^at least^ have a look at: > http://uadmin.blogspot.com/2005/06/4-dual-xeon-vs-e4500.html > This article takes into account a comparision of 4 dual xeon vs. e4500. > The author (not me!) talks about "A

Hi everyone, I'm looking into setting up a SATA hardware raid, probably 5 to use with CentOS 4. I chose hardware raid over software mostly because I like the fact that the raid is transparent to the OS. Does anyone know of any SATA controllers that are well tested for this sort of usage? From what I can tell from googling, this is more or less where RHEL stands: Red Hat Enterprise Linux

As it turns out, with the proprietary firmware, the VP3 and VP4 interfaces are identical. Furthermore, this is all already implemented for nvc0. So these patches (a) move the easily sharable bits of the nvc0 implementation into the nouveau directory, and then (b) implement the other parts in nv50. The non-shared parts are still largely copies, but there are some differences, not the least of which

The patch ''mem_event: use wait queue when ring is full'' I just sent out makes use of the waitqueue feature. There are two issues I get with the change applied: I think I got the logic right, and in my testing vcpu->pause_count drops to zero in p2m_mem_paging_resume(). But for some reason the vcpu does not make progress after the first wakeup. In my debugging there is one

...tic" DEFROUTE="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_FAILURE_FATAL="no" IPV6_ADDR_GEN_MODE="stable-privacy" NAME="ens3" UUID="8e179c97-1388-48ee-a8be-d173ee3ff40c" DEVICE="ens3" ONBOOT="yes" IPADDR="192.168.1.10" PREFIX="24" GATEWAY="192.168.1.1" DNS1="8.8.8.8" ===>>> (IF YOU USE THIS LINE, NETWORK MANAGER WILL ALWAYS OVERWRITE /etc/resolv.conf, which is undesirable) # reboot ssh int...

Hi, I am new to Xen and I was wondering if the following construction would be feasible with the current Xen. I would like to put 2/3/4 new computers in my house, mainly for gaming. Instead of buying 2/3/4 different computers, I was thinking of building one computer with a 4/6/8-core CPU, 2/3/4 GPUs, 2/3/4 small SSDs, and attach 2/3/4 monitors to it, 2/3/4 keyboards and 2/3/4 mouses, and run VGA