search for: 400ms

Hi there, (context: I was optimizing Roundcube mailbox list server response, and in that 300-400ms response time, around 170ms is spent on single fgets() call which is waiting IMAP repsonse to "SELECT MyMailbox" command) I straced dovecot and of the whole request/response process, around 30ms is spent for everything else, and overwhelming majority of time (150-170ms) is spent for read...

Hello: We noticed that opus reconstructed noise is pulsing with a 400ms pattern when dtx is enabled in silk mode. This is independent of the background noise level and is found with speech + non-speech period test files as well as variable level noise-only test files. This issue can be reproduced with opus v1.1 using this command: ./opus_demo voip 1600...

...tus 0078 nexthop B via A distance 2 pmtu 1518 (min 0 max 1518) tinc dump nodes on node D | grep A: A id xxx at xxx port 8964 cipher 0 digest 0 maclength 0 compression 0 options 400000d status 0078 nexthop B via C distance 2 pmtu 1518 (min 0 max 1518) And then, A ping test from A $ ping D approx 400ms Network traffic from both A and D should A send data via B and then D. and D replies data via B and then A. Of course ping from D -> A is approx 400ms as ping measures round-trip time. And next, I did a weird thing, delete the ed25519 key on D, making D insufficient for sptps, and restart tinc...

Hi All, I wasn't too sure how to word the subject, so I apologise for that. Anyway, I've got two X100P cards here accepting calls. Basically in Australia our ring cadence is 400ms on, 200ms off, 400ms on, 2000ms off, repeat. What I've noticed is that it takes about 8 seconds after the caller has hungup for the internal phones to stop ringing, whereas in Australia the maximum time would be 2 seconds (or 2.5 to be safe). I was just wondering if somebody might know if the...

Hi. I experienced same issue reported in https://gitlab.xiph.org/xiph/opus/issues/2026 The problem is that there are periodical(400ms) noise during DTX when the noise changed dramatically. I have found that the VAD value of silk does not affects to the DTX decision. If the background noise suddenly changes(by excessive echo cancellation, mute on/off operation, etc.) the silk generate a voice activated frame. Nevertheless, opus...

...it does receive the message, but due to limitations of the CLI, I cannot correlate whether it's received before or after the INVITE is dispatched. It works great direct to Asterisk (of course) via TE410P on the same NI-2 spans. My FACILITY message that contains the CNAM wanders in from 100 to 400ms after the initial SETUP. I can't seem to find any way to get the MAX to stall for a half-second before invoking the INVITE (if that's even the issue). Is my provider too slow? Is there another valid way for CNAM to be provided during the SETUP message, assuming my provider can stall the...

Hi all, Anyone has experience using * through 128 kbs (or bigger) satelite link? In particular I am interested to hear how many calls could be put through 128Kbs satelite link simultaneously? Ta SJ

...packets from DirectSound Buffer and use it as echo frame. I have noticed that my echo frame is of low amplitude and many values of it are 0 [zero]. -- Since the values are small, I applied AGC on echo frame with another Speex preprocessor before passing it to EC. With this approach and echo tail 400ms, I get very good echo cancellation. But some times we get distorted audio, sounds like someone speaking in pipe or underwater. -- Is there any possibility to get distorted audio if we apply speex AGC on echo frame before passing it to EC? 3: ============== -- Is there any tradeoff that if echo ca...

...ost, no harm is done, because all that happens is that the codec extrapolates a bit, meaning you get a few hundred ms of alien sounds :) In an ideal world, you'd like to use Speex DTX mode, which puts the decoder in "generate comfort noise" mode and also transfers one packet every 400ms (I think) to update the noise profile, but if you use the denoiser of the preprocessor then comfort noise == silence. > I did not implemented the jitter buffer yet, but I wonder if I should? > I was thinking about holding the first few sound frames before playing them. > That way, I in...

...pages, because they will be tracked by the hypervisor and transferred > in the subsequent round if they are used and written. > > * Tests > 1 Test Environment > Host: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz > Migration setup: migrate_set_speed 100G, migrate_set_downtime 400ms > > 2 Test Results (results are averaged over several repeated runs) > 2.1 Guest setup: 8G RAM, 4 vCPU > 2.1.1 Idle guest live migration time > Optimization v.s. Legacy = 620ms vs 2970ms > --> ~79% reduction > 2.1.2 Guest live mig...

...pages, because they will be tracked by the hypervisor and transferred > in the subsequent round if they are used and written. > > * Tests > 1 Test Environment > Host: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz > Migration setup: migrate_set_speed 100G, migrate_set_downtime 400ms > > 2 Test Results (results are averaged over several repeated runs) > 2.1 Guest setup: 8G RAM, 4 vCPU > 2.1.1 Idle guest live migration time > Optimization v.s. Legacy = 620ms vs 2970ms > --> ~79% reduction > 2.1.2 Guest live mig...

We have 2 offices. One is in the US and the other in India. We are testing Asterisk as a possible solution. Does anyone have advice for the preferred architecture when dealing with the latency from the US to India? For example, although it is not a requirement to have an Asterisk server in India it may make sense to have one there and connect office to office vi IAX since I hear that it supports

I use codec g711u or g711a but comuncation between two sip client (XTen lite) have bastard dalay of 0,5 - 1 second Is it normal ? Are there any configuration to solve problem ? Thanks all

Hi Gonzalo, Thanks for reporting this DTX issue. It should now be fixed in git. Can you confirm this it is indeed the case? Cheers, Jean-Marc On 19/05/14 10:20 AM, Gonzalo Mariano (gmariano) wrote: > Hello: > > > > We noticed that opus reconstructed noise is pulsing with a 400ms pattern > when dtx is enabled in silk mode. This is independent of the background > noise level and is found with speech + non-speech period test files as > well as variable level noise-only test files. This issue can be > reproduced with opus v1.1 using this command: > >...

...ou confirm this it is indeed the case? >> >>Cheers, >> >> Jean-Marc >> >>On 19/05/14 10:20 AM, Gonzalo Mariano (gmariano) wrote: >>> Hello: >>> >>> >>> >>> We noticed that opus reconstructed noise is pulsing with a 400ms >>> pattern when dtx is enabled in silk mode. This is independent of the >>> background noise level and is found with speech + non-speech period >>> test files as well as variable level noise-only test files. This issue >>> can be reproduced with opus v1.1 using...

Tested DTX feature in Opus 1.0.2 and 1.1 for 20, 40, and 60ms frame size. They all generated only one encoded frame every 400ms during silence period as expected. However, for 10 ms frame size, the DTX period was 200ms instead. Has anyone else experienced the same? Thanks, Chris Wang -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/opus/attachments/20150304/...

...al routing. My setup is this: HostA (local. ConnectTo = HostC) HostB (geographically close. ConnectTo = HostC) HostC (far away. ConnectTo = nothing) Without tinc, pings from HostA to HostB take around 10ms, and from HostA/B to HostC around 200ms. With tinc, pings from HostA to HostB take nearly 400ms. HostA/B to HostC are essentially unchanged. Based on the numbers it kind of seems like under tinc, traffic from HostA to HostB is being routed via HostC, all the way on the other side of the world. This seems like a strange decision giving that the direct path is clearly faster. What's th...

Dear all, I have installed DRBD 8.3.11 compiled from sources. However the backend block will freeze if there is high IO load. I use Remus to support high availability and checkpointing is controlled by remus for each 400ms. If I check the Iostat I got the idle CPU will decreasing extremely each checkpointing and when its reach 0% of idle cpu the local backing device will freeze and damage the replication. Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn drbd1 0.00 0.00...

...l be tracked by the hypervisor and transferred >> in the subsequent round if they are used and written. >> >> * Tests >> 1 Test Environment >> Host: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz >> Migration setup: migrate_set_speed 100G, migrate_set_downtime 400ms >> >> 2 Test Results (results are averaged over several repeated runs) >> 2.1 Guest setup: 8G RAM, 4 vCPU >> 2.1.1 Idle guest live migration time >> Optimization v.s. Legacy = 620ms vs 2970ms >> --> ~79% reduction >>...

I am working on re-factoring my admittedly ambitious employee management Rails app that I created for work. The good news is, my first major version went over like a dream(With no small amount of thanks due to the community and the support)! All of the functionality the bosses dreamed of! The bad news? It''s REALLY SLOW. So I rolled up my sleeves and have been working on some re-writes