search for: 3u

I have the following UPS that I'm trying to get to work with NUT: SU3000RTXL3U I have it connected via USB. My ups.conf looks like: [test] driver = usbhid-ups vendorid = 09ae port = auto When I run upsdrvctl -DD start, I get: Network UPS Tools - UPS driver controller 2.4.1 Starting UPS: test exec: /lib/nut/usbhid-ups -a test Network UPS Tools - Generic HID dr...

...0.10.40.164:40020->10.10.20.92:3268 (ESTABLISHED) lwsmd 3231 0 26u IPv4 64244 0t0 TCP 10.10.40.164:46136->10.10.20.93:389 (ESTABLISHED) lwsmd 3231 0 32u IPv4 64190 0t0 TCP 10.10.40.164:46130->10.10.20.93:389 (ESTABLISHED) sshd 9140 0 3u IPv4 37379 0t0 TCP *:22 (LISTEN) nmbd 28134 0 16u IPv4 62715 0t0 UDP *:137 nmbd 28134 0 17u IPv4 62716 0t0 UDP *:138 nmbd 28134 0 18u IPv4 62718 0t0 UDP 10.10.40.164:137 nmbd 28134 0 19u IPv4 62719 0t0 UDP 1...

Hello, Today I updated one of our computers running CentOS 5.3 32bit. After a reboot I notice the following with lsof -i sshd 3638 root 3u IPv6 17317 TCP pc46.astro.up.pt:ssh->119.1.193.205:zephyr-clt (ESTABLISHED) sshd 3639 sshd 3u IPv6 17317 TCP pc46.astro.up.pt:ssh->119.1.193.205:zephyr-clt (ESTABLISHED) What is this connection? IPtables is on and SELinux is on enforcing mode. Thanks,...

...a fairly decent configuration for Asterisk/Digium T1 termination. I am looking for well-built hardware from an integrator that understands correct component choice. Preferably, I'd like SCSI but I might be able to do Ultra-IDE platforms. I need at least two PCI slots in the chassis (so 2u/3u size factor is OK.) URLs are appreciated. If you have a vendor from whom you've received hardware for use with Asterisk and are impressed with their quality, do them a favor and send it along. Especially useful are hints about vendors who have "lights-out" motherboards where the...

...g to the custom ssh server: ssh -R 1037:localhost:55555. After this command on ssh server process list i see: sshd 29996 root 3r IPv4 1310919488 TCP 10.55.41.92:2233->10.55.40.121:2481 (ESTABLISHED) sshd 30000 615da7706d6c4babbcd6e6fb867ddab1 3u IPv4 1310919488 TCP 10.55.41.92:2233->10.55.40.121:2481 (ESTABLISHED) sshd 30000 615da7706d6c4babbcd6e6fb867ddab1 7u IPv4 1310919539 TCP 127.0.0.1:1037 (LISTEN) sshd 30000 615da7706d6c4babbcd6e6fb867ddab1 8u IPv6 1310919540 TCP [::1]:1037 (LISTEN) sshd 3...

...ould like to use in our server infrastructure. The platform should have: - possibility to install up to 32GB of RAM and at least 4 slots for it; - at least 6 SATA ports; - the possibility to use SAS disks; - at least one 1Gb/s network interface and the possibility to add another one; - size of 2 or 3U; - hot swap for disks. We are looking for a solution in which we would be able to deploy a basic server with for example 2 SATA disks, 8GB of RAM, 1 NIC, 4 cors and to be able to use the same enclosure and motherboard and extend it to deploy a more heavy-duty server with for example 6 SATA disks, 2...

Hi there, when I try to start the nmbd -D daemon on my OpenServer5.0.5 box, I'll get the errormessage in log.nmbd: [...] [2002/03/12 19:30:18, 0] nmbd/nmbd.c:(783) Netbios nameserver version 2.2.3a started. Copyright Andrew Tridgell and the Samba Team 1994-2002 [2002/03/12 19:30:18, 0] lib/util_sock.c:(789) bind failed on port 137 socket_addr = 0.0.0.0. Error = Address already in use

Hi guys, I'm building a server that need to host 2 digium TDM24 cards. I know any 3U server with 2 PCI-E slots would do. Since I do prefer supermicro server, but getting one configured is pretty darn hard. Any suggestions here? Cheers, Kelvin Chan | Positronics Ent. Product Development | | unit 272 604-628-9330 (direct) | 8128 12...

...40020->10.10.20.92:3268 (ESTABLISHED) lwsmd > 3231 0 26u IPv4 64244 0t0 TCP > 10.10.40.164:46136->10.10.20.93:389 (ESTABLISHED) lwsmd > 3231 0 32u IPv4 64190 0t0 TCP > 10.10.40.164:46130->10.10.20.93:389 (ESTABLISHED) sshd > 9140 0 3u IPv4 37379 0t0 TCP *:22 (LISTEN) nmbd > 28134 0 16u IPv4 62715 0t0 UDP *:137 nmbd > 28134 0 17u IPv4 62716 0t0 UDP *:138 nmbd > 28134 0 18u IPv4 62718 0t0 UDP 10.10.40.164:137 > nmbd 28134 0 19u IPv4 62719 0t...

...20073 root DEL REG 0,8 4389866 /dev/zero sshd 20073 root 0u CHR 1,3 1069 /dev/null sshd 20073 root 1u CHR 1,3 1069 /dev/null sshd 20073 root 2u CHR 1,3 1069 /dev/null sshd 20073 root 3u IPv4 4389854 TCP vrf2a.bvwpitlab.ca:ssh->em-pit.bvwpitlab.ca:43178 (ESTABLISHED) sshd 20073 root 4u unix 0xed384740 4389877 socket sshd 20073 root 6u unix 0xed3843c0 4389882 socket sshd 20075 nortel cwd DIR 3,10 4096 2 / ssh...

Whilst monitoring my host I noticed that there were three mongrel_rails processes running for a single (non mongrel_clustered) application. Is this normal? Do the processes share the memory top indicates they''re each using? Cheers, -- Dave Murphy (Schwuk) http://schwuk.com

I am trying to build a file server with 1 x 80 GB main drive and 4 x 500 GB SATA drives in RAID in a Supermicro 3U server. I found out the hard way that Centos 4.2 does not have a driver for the onboard Marvell H2 controller the drives are connected to. Supermicro techs sent me aar81xx.rhel4qu2.i686.img as an img file. I used dd to copy to a floppy and dd confirmed successful write. I booted Centos 4.2 and...

...40020->10.10.20.92:3268 (ESTABLISHED) lwsmd > 3231 0 26u IPv4 64244 0t0 TCP > 10.10.40.164:46136->10.10.20.93:389 (ESTABLISHED) lwsmd > 3231 0 32u IPv4 64190 0t0 TCP > 10.10.40.164:46130->10.10.20.93:389 (ESTABLISHED) sshd > 9140 0 3u IPv4 37379 0t0 TCP *:22 (LISTEN) nmbd > 28134 0 16u IPv4 62715 0t0 UDP *:137 nmbd > 28134 0 17u IPv4 62716 0t0 UDP *:138 nmbd > 28134 0 18u IPv4 62718 0t0 UDP 10.10.40.164:137 > nmbd 28134 0 19u IPv4 62719 0t...

...(&EF(%L@)%9%4D)/4T4@/2!Y97, at 73L@=&AE;@H) M"65C:&\@+6X@(B0P.B!.;W1I8V4Z($=E='1I;F<@8V]R92!D=6UP<R!I;B`D M1$E2(&]F("0Q('!R;V-E<W-E<SHB(#XF, at H)("`@(&9I"@D@("`@9F]R(%!) M1"!I;B`D4$E$4SL at 9&\*"0EI9B!;("1615)"3U-%(#T@>65S(%T[('1H96X* M"0D@("`@96-H;R`M;B`B("10240B(#XF, at H)"69I"@D)9V-O<F4 at +6,@(B1$ M25(O8V]R92XD4$E$(B`B)%!)1"(*"2`@("!D;VYE"@D@("`@:68 at 6R`D5D52 M0D]312`]('EE<R!=.R!T:&5N"@D)96-H;R`B(B`^)C(*"2`@("!F:0H)9...

...sprintf(debugfs_name, "vport%up%u", >>> - port->portdev->vdev->index, id); >>> + snprintf(debugfs_name, sizeof(debugfs_name), "vport%up%u", >>> + port->portdev->vdev->index, id); >> >> >> would it help to use %03u (or so) to make it more obvious ? >> >> Note: i prefer a leading 0 in my programms to make it more easy >> to work with grep and friends. you may thing otherwise. > > Well we've been exposing names like /dev/vport0p0, /dev/vport2p15, > etc., and there might be script...

...sprintf(debugfs_name, "vport%up%u", >>> - port->portdev->vdev->index, id); >>> + snprintf(debugfs_name, sizeof(debugfs_name), "vport%up%u", >>> + port->portdev->vdev->index, id); >> >> >> would it help to use %03u (or so) to make it more obvious ? >> >> Note: i prefer a leading 0 in my programms to make it more easy >> to work with grep and friends. you may thing otherwise. > > Well we've been exposing names like /dev/vport0p0, /dev/vport2p15, > etc., and there might be script...

...+), 3 deletions(-) diff --git a/kernel/locking/qspinlock_paravirt.h b/kernel/locking/qspinlock_paravirt.h index 9b4ac3d..41ee033 100644 --- a/kernel/locking/qspinlock_paravirt.h +++ b/kernel/locking/qspinlock_paravirt.h @@ -19,7 +19,8 @@ * native_queue_spin_unlock(). */ -#define _Q_SLOW_VAL (3U << _Q_LOCKED_OFFSET) +#define _Q_SLOW_VAL (3U << _Q_LOCKED_OFFSET) +#define MAYHALT_THRESHOLD (SPIN_THRESHOLD >> 4) /* * The vcpu_hashed is a special state that is set by the new lock holder on @@ -39,6 +40,7 @@ struct pv_node { int cpu; u8 state; + u8 mayhalt;...

...ect attempt, for example: $ cat ~/.ssh/config Host * ControlMaster auto ControlPath ~/.ssh/%r@%h:%p $ ssh -gTfNL 12345:localhost:12345 host $ netstat -tln tcp 0 0 0.0.0.0:12345 0.0.0.0:* LISTEN - $ lsof -n ssh 182446 user 3u IPv4 76397177 0t0 TCP 192.168.0.9:51181->192.168.0.15:ssh (ESTABLISHED) ssh 182446 user 4u IPv4 76397181 0t0 TCP *:3128 (LISTEN) ssh 182446 user 5u IPv6 76397182 0t0 TCP *:3128 (LISTEN) an...

Hello listmates, I would like to build a 12-15 TB RAID 5 data server to run under ContOS. Any recommendations as far as hardware, configuration, etc? Thanks. Boris.

...tOS. Ended up snagging a Supermicro SC826TQ-R800LPB 2U case (12 drives slots) and a Supermicro X7DBE-O motherboard. Unfortunately, without thinking I snagged a 3ware 9650SE-12ML SATA RAID card which is a full height card and thus does not fit in my case. I have a few options here: - Go with a 3U case instead. Now I have a 16-drive case with only a 12-way card. :-) - Return the 3Ware and order two of the 8-way cards which are half-height. This means I love some of my space now however as I have to have an extra spare drive per card. - Get a PCI-E riser. The riser option I...