search for: 3c59x

...crash. I also increased /proc/sys/vm/freepages to such large numbers that there was always over a meg of free mem while a file transfer was going, but the box still crashed. The stack dump used to be from many different programs, but, after I increased freepages, it seems to always be from the 3c59x module. I have tried 3com's driver instead. It held up better under load, but still crashed after about 15 minutes of file transfer via samba. I do not believe this is a RAID problem as I get the same problem with RAID turned off and sharing a regular non-RAID directory with samba. I no...

...732 6 mISDN_capi,hfcpci,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1 md5 4352 1 ipv6 235840 24 parport_pc 25024 1 lp 12396 0 parport 42696 2 parport_pc,lp dm_mod 55444 0 uhci_hcd 31896 0 3c59x 36776 0 floppy 59568 0 ext3 116744 2 jbd 74904 1 ext3 and my modules.conf : >load => chan_capi.so >[global] >chan_capi.so=yes what seems to be the problem can someone help me? tahnk?s

...''01,01,0'' ] I don''t belive it is the openSUSE kernel 2.6.22.13-0.3-xenpae because on an identical system with an 3Com NIC the export of the PCI device works perfect... Here it''s enough to set in /etc/modprobe.conf.local: options pciback hide (02:0d.0) install 3c59x /sbin/modprobe pciback ; /sbin/modprobe --first-time --ignore-install 3c59x also commenting out the eth1 device in /etc/modprobe.conf and remove network config for eth1. I''m a little bit confused because the working mISDN doesn''t show an any hfcpci device under /sys/bus/pci...

...address 00000000 Aug 15 23:01:28 mydomain kernel: printing eip: Aug 15 23:01:28 mydomain kernel: c01b2de4 Aug 15 23:01:28 mydomain kernel: *pde = 0790d067 Aug 15 23:01:28 mydomain kernel: Oops: 0000 [#1] Aug 15 23:01:28 mydomain kernel: Modules linked in: md5 ipv6 autofs4 i2c_dev i2c_core uhci_hcd 3c59x mii floppy ata_piix libata dm_snapshot dm_zero dm_mirr or ext3 jbd dm_mod 3w_xxxx sd_mod scsi_mod Aug 15 23:01:28 mydomain kernel: CPU: 0 Aug 15 23:01:28 mydomain kernel: EIP: 0060:[<c01b2de4>] Not tainted VLI Aug 15 23:01:28 mydomain kernel: EFLAGS: 00010246 (2.6.9-55.0.2.EL) Aug...

$ uname -a Linux xxx 2.6.9-22.0.1.ELsmp #1 SMP Thu Oct 27 13:14:25 CDT 2005 i686 i686 i386 GNU/Linux $ lsmod | grep "[^0-9]0" | grepbyhand ip_gre 16865 0 3c59x 41213 0 tg3 85061 0 It is very likely an error that these have usage counts of 0. (the interfaces are very much up, and a GRE tunnel is configured) Seeing as the same thing happens with bcm5700 modules from HP it's likely this is not actually a module pro...

I just want to echo that we have a server (QSol, dual 1.6G AMDcpus, scsi raid 2.4.18-3smp #1 SMP cat /proc/modules 3c59x 29064 2 ipchains 46184 13 usb-ohci 21568 0 (unused) usbcore 77024 1 [usb-ohci] ext3 70720 4 jbd 53504 4 [ext3] DAC960 65280 5 sd_mod 12896 0 (unused) scsi_...

...warma kernel: Modules linked in: n_hdlc ppp_synctty ipv6 autofs ipt_TCPMSS ipt_MASQUERADE iptable_nat ip_conntrack iptable_filter ip_tables snd_ens1371 snd_rawmidi snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_timer snd_ac97_codec snd soundcore uhci_hcd usbcore via_agp agpgart 3c59x Jun 10 10:28:59 shawarma kernel: CPU: 0 Jun 10 10:28:59 shawarma kernel: EIP: 0060:[journal_grab_journal_head+7/32] Not tainted Jun 10 10:28:59 shawarma kernel: EFLAGS: 00010213 (2.6.7-rc2-bk5) Jun 10 10:28:59 shawarma kernel: EIP is at journal_grab_journal_head+0x7/0x20 Jun 10 10:28:59...

...at,nf_nat,nf_conntrack_ipv4 nfnetlink 4888 3 nf_nat,nf_conntrack_ipv4,nf_conntrack iptable_filter 2436 1 ip_tables 9560 3 iptable_mangle,iptable_nat,iptable_filter usbhid 19424 0 uhci_hcd 18836 0 via_rhine 18456 0 3c59x 35820 0 Any help ?? []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente".

...SMP last sysfs file: /class/net/eth1/address Modules linked in: xennet ip_conntrack_netbios_ns ipt_REJECT xt_state ip_conntrack nfnetlink iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 xfrm_nalgo crypto_api dm_mirror dm_multipath dm_mod parport_pc lp parport 3c59x pcspkr mii xenblk ext3 jbd uhci_hcd ohci_hcd ehci_hcd CPU: 0 EIP: 0061:[<c040a39c>] Not tainted VLI EFLAGS: 00010292 (2.6.18-92.el5xen #1) EIP is at dma_map_single+0x12d/0x147 eax: 0000002f ebx: 00000000 ecx: 00000001 edx: f5416000 esi: 38f59e02 edi: 00000001 ebp: 0000004...

Hi, Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo) Steps: modprobe zaptel modprobe wctdm ztcfg -vv /etc/zaptel.conf fxsls=1-4 # TDM04B defaultzone=us loadzone=us /etc/asterisk/zapata.conf signalling=fxs_ls group=1 context=incoming channel => 1-4 modprobe zaptel and wctdm load fine, however ztcfg -vv shows: 0 channels configured Im using centos 4.4 with

I have a router with 3 network interfaces like in the following ASCII diagram below. All interfaces are 100mbit. There is tcp traffic being sent from net1 to net3 and from net2 to net3 and the tcp connections consume as much bandwidth as possible. There is a pfifo queue on the egress interface eth0 of the core router with a limit of 10 packets. net1 --> (eth1) router (eth0) -> net3

...some brouting like stuff too, but it's not there yet) Panic output: Unable to handle kernel NULL pointer dereference at virtual address 0000000c printing eip: c0359b67 *pde = 00000000 Oops: 0000 [#1] Modules linked in: ebt_ip ebtable_filter ebtbles rtc sata_nv nvsound sata_sil nvnet eepro100 3c59x r8169 CPU: 0 EIP: 0060:[<c0359b67>] Tainted: P VLI EFLAGS: 00010282 (2.6.15) EIP i at br_nf_pre_routing_finish+0x1a/0x2c0 eax: 00000000 ebx: 00000000 ecx: c0475e9c edx: dfb2c5a0 esi: cv760820 edi: 80000000 ebp: deefe000 esp: c0475de0 ds: 007b es: 007b ss: 0068...

...handle kernel paging request at virtual address ffffff00 printing eip: e0bbe503 *pde = 00002067 Oops: 0000 [#1] Modules linked in: fcpci(U) kernelcapi nfsd exportfs lockd parport_pc lp parport md5 ipv6 autofs4 sunrpc video button battery ac ohci_hcd i2c_amd756 i2c_core crc_ccitt isdn slhc r8169 3c59x floppy dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod CPU: 0 EIP: 0060:[<e0bbe503>] Tainted: P VLI EFLAGS: 00010217 (2.6.10-1.741_FC3) EIP is at memcpy+0x13/0x30 [fcpci] eax: e0bbee4f ebx: dc1a403c ecx: 382efb93 edx: e0c14e54 esi: ffffff00 edi: e0bbe45e ebp: dbb80e90...

...xt_owner iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_sta te nf_conntrack ip6table_filter ip6_tables blktap xen_netback xen_blkback xen_gntdev xen_evtchn xenfs xen_privcmd ppdev parport_pc parport fjes 3c59x asus_atk0110 pcspkr serio_raw k8temp vi a_rhine mii i2c_viapro shpchp raid1 pata_via pata_acpi ata_generic sata_via [59826.069842] CPU: 0 PID: 32443 Comm: sshd Not tainted 4.9.23-26.el6.x86_64 #1 [59826.069860] Hardware name: System manufacturer System Product Name/K8V-VM, BIOS 0201 06/13/2006 [...

...57796 0 pcspkr 3936 0 i2c_i801 8332 0 i2c_core 21264 1 i2c_i801 pci_hotplug 27956 0 hw_random 5652 0 intel_agp 21276 1 ide_scsi 16132 0 scsi_mod 137576 1 ide_scsi 3c59x 40232 0 mii 5120 1 3c59x agpgart 33480 1 intel_agp snd_ca0106 28196 0 snd_ac97_codec 84092 1 snd_ca0106 snd_ac97_bus 2304 1 snd_ac97_codec snd_als4000 13664 0 snd_sb_common 15232 1 snd_als...

Hi Yum has just updated 5 of my Linux boxes running CentOS 4.3 to the 2.6.9-42 kernel. All is well on four of the boxes, but on the fifth the network card (eth0) will not work. I've downgraded the kernel to the previous version and the network card works fine again. I've tried removing and re-installing the new kernel, but the network card won't work with it. The details of the

Today I updated several servers running CentOS 4.3, and got the new 2.6.9-42 kernel. One of the machines serves as our firewall. After rebooting I lost all forwarding thru the machine. I reverted back to the 2.6.9-34 kernel and connectivity returned. During the few minutes that the new kernel was running I checked that the routing table looked OK, and with tcpdump I saw that indeed no traffic

...14212 0 floppy 59588 0 ohci1394 33584 0 sata_sil 12296 4 ieee1394 93752 2 sbp2,ohci1394 aic7xxx 178264 0 scsi_transport_spi 25472 1 aic7xxx pata_pdc2027x 12676 1 ata_generic 8324 0 3c59x 46376 0 mii 6400 1 3c59x skge 43536 0 libata 159600 5 pata_acpi,pata_amd,sata_sil,pata_pdc2027x,ata_generic scsi_mod 151436 10 usb_storage,sbp2,st,osst,sd_mod,sr_mod,sg,aic7xxx,scsi_transport_spi,libata ehci_h...

...24560 0 (unused) usbcore 58144 1 [hid usbmouse uhci] hisax 448228 0 (unused) isdn 115712 0 [hisax] slhc 5040 0 [ppp_generic isdn] isa-pnp 30724 0 [hisax] ide-scsi 8048 0 3c59x 26736 1 is the problem that the hisax isdn drivers have loaded? if so how do I stop them loading? can anyone help me fix the problem Thanks in advance Robb

...77732 5 hfcpci,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1 md5 4352 1 ipv6 235840 26 parport_pc 25024 1 lp 12396 0 parport 42696 2 parport_pc,lp dm_mod 55444 0 uhci_hcd 31896 0 3c59x 36776 0 floppy 59568 0 ext3 116744 2 jbd 74904 1 ext3 and i do modprobe hfcpci protocol=0x2 layermask=0xf